使用OpenCV和Python正确的旋转图片

最新推荐文章于 2024-03-09 19:38:36 发布

huangcy_0518

最新推荐文章于 2024-03-09 19:38:36 发布

阅读量4.9k

点赞数

现在在做人脸矫正，使用仿射变换之后的人脸总会溢出边框，就参考了这篇博客，使用了旋转后不会溢出的方法。

原文链接：

Rotate images (correctly) with OpenCV and Python。作者的这篇blog非常棒！转载内容如下：

opencv_rotated_header

Let me tell you an embarrassing story of how I wasted three weeks of research time during graduate school six years ago.

It was the end of my second semester of coursework.

I had taken all of my exams early and all my projects for the semester had been submitted.

Since my school obligations were essentially nil, I started experimenting with (automatically) identifying prescription pills in images, something I know a thing or two about (but back then I was just getting started with my research).

At the time, my research goal was to find and identify methods to reliably quantify pills in a rotation invariant manner. Regardless of how the pill was rotated, I wanted the output feature vector to be (approximately) the same (the feature vectors will never be to completely identical in a real-world application due to lighting conditions, camera sensors, floating point errors, etc.).

After the first week I was making fantastic progress.

I was able to extract features from my dataset of pills, index them, and then identify my test set of pills regardless of how they were oriented…

…however, there was a problem:

My method was only working with round, circular pills — I was getting completely nonsensical results for oblong pills.

How could that be?

I racked my brain for the explanation.

Was there a flaw in the logic of my feature extraction algorithm?

Was I not matching the features correctly?

Or was it something else entirely…like a problem with my image preprocessing.

While I might have been ashamed to admit this as a graduate student, the problem was the latter:

I goofed up.

It turns out that during the image preprocessing phase, I was rotating my images incorrectly.

Since round pills have are approximately square in their aspect ratio, the rotation bug wasn’t a problem for them. Here you can see a round pill being rotated a full 360 degrees without an issue:

Figure 1: Rotating a circular pill doesn't reveal any obvious problems.

Figure 1: Rotating a circular pill doesn’t reveal any obvious problems.

But for oblong pills, they would be “cut off” in the rotation process, like this:

Figure 2: However, rotating oblong pills using the OpenCV's standard cv2.getRotationMatrix2D and cv2.warpAffine functions caused me some problems.

Figure 2: However, rotating oblong pills using the OpenCV’s standard cv2.getRotationMatrix2D and cv2.warpAffine functions caused me some problems that weren’t immediately obvious.

In essence, I was only quantifying part of the rotated, oblong pills; hence my strange results.

I spent three weeks and part of my Christmas vacation banging my head against the wall trying to diagnose the bug — only to feel quite embarrassed when I realized it was due to me being negligent with the cv2.rotate function.

You see, the size of the output image needs to be adjusted, otherwise, the corners of my image would be cut off.

How did I accomplish this and squash the bug for good?

To learn how to rotate images with OpenCV such that the entire image is included and none of the image is cut off, just keep reading.

Looking for the source code to this post?
Jump right to the downloads section.

Rotate images (correctly) with OpenCV and Python

In the remainder of this blog post I’ll discuss common issues that you may run into when rotating images with OpenCV and Python.

Specifically, we’ll be examining the problem of what happens when the corners of an image are “cut off” during the rotation process.

To make sure we all understand this rotation issue with OpenCV and Python I will:

Start with a simple example demonstrating the rotation problem.
Provide a rotation function that ensures images are not cut off in the rotation process.
Discuss how I resolved my pill identification issue using this method.

A simple rotation problem with OpenCV

Let’s get this blog post started with an example script.

Open up a new file, name it rotate_simple.py , and insert the following code:

Rotate images (correctly) with OpenCV and Python

Python

# import the necessary packages

import numpy as np

import argparse

import imutils

import cv2

# construct the argument parse and parse the arguments

ap = argparse.ArgumentParser()

ap.add_argument("-i", "--image", required=True,

help="path to the image file")

args = vars(ap.parse_args())

Lines 2-5 start by importing our required Python packages.

If you don’t already have imutils, my series of OpenCV convenience functions installed, you’ll want to do that now:

Rotate images (correctly) with OpenCV and Python

Shell

1	$ pip install imutils

If you already have imutils installed, make sure you have upgraded to the latest version:

Rotate images (correctly) with OpenCV and Python

Shell

1	$ pip install --upgrade imutils

From there, Lines 8-10 parse our command line arguments. We only need a single switch here, --image , which is the path to where our image resides on disk.

Let’s move on to actually rotating our image:

Rotate images (correctly) with OpenCV and Python

Python

# load the image from disk

image = cv2.imread(args["image"])

# loop over the rotation angles

for angle in np.arange(0, 360, 15):

rotated = imutils.rotate(image, angle)

cv2.imshow("Rotated (Problematic)", rotated)

cv2.waitKey(0)

# loop over the rotation angles again, this time ensuring

# no part of the image is cut off

for angle in np.arange(0, 360, 15):

rotated = imutils.rotate_bound(image, angle)

cv2.imshow("Rotated (Correct)", rotated)

cv2.waitKey(0)

Line 14 loads the image we want to rotate from disk.

We then loop over various angles in the range [0, 360] in 15 degree increments (Line 17).

For each of these angles we call imutils.rotate , which rotates our image the specified number of angle degrees about the center of the image. We then display the rotated image to our screen.

Lines 24-27 perform an identical process, but this time we call imutils.rotate_bound (I’ll provide the implementation of this function in the next section).

As the name of this method suggests, we are going to ensure the entire image is bound inside the window and none is cut off.

To see this script in action, be sure to download the source code using the “Downloads”section of this blog post, followed by executing the command below:

Rotate images (correctly) with OpenCV and Python

Shell

1	$ python rotate_simple.py --image images/saratoga.jpg

The output of using the imutils.rotate function on a non-square image can be seen below:

Figure 3: An example of corners being cut off when rotating an image using OpenCV and Python.

As you can see, the image is “cut off” when it’s rotated — the entire image is not kept in the field of view.

But if we use imutils.rotate_bound we can resolve this issue:

Figure 4: We can ensure the entire image is kept in the field of view by modifying the matrix returned by cv2.getRotationMatrix2D.

Awesome, we fixed the problem!

So does this mean that we should always use .rotate_bound over the .rotate method?

What makes it so special?

And what’s going on under the hood?

I’ll answer these questions in the next section.

Implementing a rotation function that doesn’t cut off your images

Let me start off by saying there is nothing wrong with the cv2.getRotationMatrix2D andcv2.warpAffine functions that are used to rotate images inside OpenCV.

In reality, these functions give us more freedom than perhaps we are comfortable with (sort of like comparing manual memory management with C versus automatic garbage collection with Java).

The cv2.getRotationMatrix2D function doesn’t care if we would like the entire rotated image to kept.

It doesn’t care if the image is cut off.

And it won’t help you if you shoot yourself in the foot when using this function (I found this out the hard way and it took 3 weeks to stop the bleeding).

Instead, what you need to do is understand what the rotation matrix is and how it’s constructed.

You see, when you rotate an image with OpenCV you call cv2.getRotationMatrix2D which returns a matrix M that looks something like this:

Figure 5: The structure of the matrix M returned by cv2.getRotationMatrix2D.

This matrix looks scary, but I promise you: it’s not.

To understand it, let’s assume we want to rotate our image $\theta$ degrees about some center $(c_{x}, c_{y})$ coordinates at some scale (i.e., smaller or larger).

We can then plug in values for $\alpha$ and $\beta$ :

$\alpha = scale * cos \theta$ and $\beta = scale * sin \theta$

That’s all fine and good for simple rotation — but it doesn’t take into account what happens if an image is cut off along the borders. How do we remedy this?

The answer is inside the rotate_bound function in convenience.py of imutils:

Rotate images (correctly) with OpenCV and Python

Python

def rotate_bound(image, angle):

# grab the dimensions of the image and then determine the

# center

(h, w) = image.shape[:2]

(cX, cY) = (w // 2, h // 2)

# grab the rotation matrix (applying the negative of the

# angle to rotate clockwise), then grab the sine and cosine

# (i.e., the rotation components of the matrix)

M = cv2.getRotationMatrix2D((cX, cY), -angle, 1.0)

cos = np.abs(M[0, 0])

sin = np.abs(M[0, 1])

# compute the new bounding dimensions of the image

nW = int((h * sin) + (w * cos))

nH = int((h * cos) + (w * sin))

# adjust the rotation matrix to take into account translation

M[0, 2] += (nW / 2) - cX

M[1, 2] += (nH / 2) - cY

# perform the actual rotation and return the image

return cv2.warpAffine(image, M, (nW, nH))

On Line 41 we define our rotate_bound function.

This method accepts an input image and an angle to rotate it by.

We assume we’ll be rotating our image about its center (x, y)-coordinates, so we determine these values on lines 44 and 45.

Given these coordinates, we can call cv2.getRotationMatrix2D to obtain our rotation matrix M (Line 50).

However, to adjust for any image border cut off issues, we need to apply some manual calculations of our own.

We start by grabbing the cosine and sine values from our rotation matrix M (Lines 51 and 52).

This enables us to compute the new width and height of the rotated image, ensuring no part of the image is cut off.

Once we know the new width and height, we can adjust for translation on Lines 59 and 60 by modifying our rotation matrix once again.

Finally, cv2.warpAffine is called on Line 63 to rotate the actual image using OpenCV while ensuring none of the image is cut off.

For some other interesting solutions (some better than others) to the rotation cut off problem when using OpenCV, be sure to refer to this StackOverflow thread and this one too.

Fixing the rotated image “cut off” problem with OpenCV and Python

Let’s get back to my original problem of rotating oblong pills and how I used .rotate_bound to solve the issue (although back then I had not created the imutils Python package — it was simply a utility function in a helper file).

We’ll be using the following pill as our example image:

Figure 6: The example oblong pill we will be rotating with OpenCV.

To start, open up a new file and name it rotate_pills.py . Then, insert the following code:

Rotate images (correctly) with OpenCV and Python

Python

# import the necessary packages

import numpy as np

import argparse

import imutils

import cv2

# construct the argument parse and parse the arguments

ap = argparse.ArgumentParser()

ap.add_argument("-i", "--image", required=True,

help="path to the image file")

args = vars(ap.parse_args())

Lines 2-5 import our required Python packages. Again, make sure you have installed and/or upgraded the imutils Python package before continuing.

We then parse our command line arguments on Lines 8-11. Just like in the example at the beginning of the blog post, we only need one switch: --image , the path to our input image.

Next, we load our pill image from disk and preprocess it by converting it to grayscale, blurring it, and detecting edges:

Rotate images (correctly) with OpenCV and Python

Python

# load the image from disk, convert it to grayscale, blur it,

# and apply edge detection to reveal the outline of the pill

image = cv2.imread(args["image"])

gray = cv2.cvtColor(image, cv2.COLOR_BGR2GRAY)

gray = cv2.GaussianBlur(gray, (3, 3), 0)

edged = cv2.Canny(gray, 20, 100)

After executing these preprocessing functions our pill image now looks like this:

Figure 7: Detecting edges in the pill.

The outline of the pill is clearly visible, so let’s apply contour detection to find the outline of the pill:

Rotate images (correctly) with OpenCV and Python

Python

# find contours in the edge map

cnts = cv2.findContours(edged.copy(), cv2.RETR_EXTERNAL,

cv2.CHAIN_APPROX_SIMPLE)

cnts = cnts[0] if imutils.is_cv2() else cnts[1]

We are now ready to extract the pill ROI from the image:

Rotate images (correctly) with OpenCV and Python

Python

# ensure at least one contour was found

if len(cnts) > 0:

# grab the largest contour, then draw a mask for the pill

c = max(cnts, key=cv2.contourArea)

mask = np.zeros(gray.shape, dtype="uint8")

cv2.drawContours(mask, [c], -1, 255, -1)

# compute its bounding box of pill, then extract the ROI,

# and apply the mask

(x, y, w, h) = cv2.boundingRect(c)

imageROI = image[y:y + h, x:x + w]

maskROI = mask[y:y + h, x:x + w]

imageROI = cv2.bitwise_and(imageROI, imageROI,

mask=maskROI)

First, we ensure that at least one contour was found in the edge map (Line 26).

Provided we have at least one contour, we construct a mask for the largest contour region on Lines 29 and 30.

Our mask looks like this:

Figure 8: The mask representing the entire pill region in the image.

Given the contour region, we can compute the (x, y)-coordinates of the bounding box of the region (Line 34).

Using both the bounding box and mask , we can extract the actual pill region ROI (Lines 35-38).

Now, let’s go ahead and apply both the imutils.rotate and imutils.rotate_bound functions to the imageROI , just like we did in the simple examples above:

Rotate images (correctly) with OpenCV and Python

Python

# loop over the rotation angles

for angle in np.arange(0, 360, 15):

rotated = imutils.rotate(imageROI, angle)

cv2.imshow("Rotated (Problematic)", rotated)

cv2.waitKey(0)

# loop over the rotation angles again, this time ensure the

# entire pill is still within the ROI after rotation

for angle in np.arange(0, 360, 15):

rotated = imutils.rotate_bound(imageROI, angle)

cv2.imshow("Rotated (Correct)", rotated)

cv2.waitKey(0)

After downloading the source code to this tutorial using the “Downloads” section below, you can execute the following command to see the output:

Rotate images (correctly) with OpenCV and Python

Shell

1	$ python rotate_pills.py --image images/pill_01.png

The output of imutils.rotate will look like:

Figure 9: Incorrectly rotating an image with OpenCV causes parts of the image to be cut off.

Notice how the pill is cut off during the rotation process — we need to explicitly compute the new dimensions of the rotated image to ensure the borders are not cut off.

By using imutils.rotate_bound , we can ensure that no part of the image is cut off when using OpenCV:

Figure 10: By modifying OpenCV's rotation matrix we can resolve the issue and ensure the entire image is visible.

Figure 10: By modifying OpenCV’s rotation matrix we can resolve the issue and ensure the entire image is visible.

Using this function I was finally able to finish my research for the winter break — but not before I felt quite embarrassed about my rookie mistake.

Summary

In today’s blog post I discussed how image borders can be cut off when rotating images with OpenCV and cv2.warpAffine .

The fact that image borders can be cut off is not a bug in OpenCV — in fact, it’s howcv2.getRotationMatrix2D and cv2.warpAffine are designed.

While it may seem frustrating and cumbersome to compute new image dimensions to ensure you don’t lose your borders, it’s actually a blessing in disguise.

OpenCV gives us so much control that we can modify our rotation matrix to make it do exactlywhat we want.

Of course, this requires us to know how our rotation matrix M is formed and what each of its components represents (discussed earlier in this tutorial). Provided we understand this, the math falls out naturally.

To learn more about image processing and computer vision, be sure to take a look at the PyImageSearch Gurus course where I discuss these topics in more detail.

Otherwise, I encourage you to enter your email address in the form below to be notified when future blog posts are published.

huangcy_0518

关注

0
点赞
踩
6

收藏

觉得还不错? 一键收藏
0
评论
使用OpenCV和Python正确的旋转图片

现在在做人脸矫正，使用仿射变换之后的人脸总会溢出边框，就参考了这篇博客，使用了旋转后不会溢出的方法。原文链接：Rotate images (correctly) with OpenCV and Python。作者的这篇blog非常棒！转载内容如下： Let me tell you an embarrassing story of how I wasted three weeks...
复制链接

扫一扫