任意分频

详细讲解参照从零开始走进FPGA世界，一下是我参照现有20MHz的板子的程序，

/***************************************************
* Module Name : clk_generator
* Engineer : catarget
* Target Device : EP2C8Q208C8
* Tool versions : Quartus II 9.0
* Create Date : 2011-12-3
* Revision : v1.0
* Description :
**************************************************/
/*************************************************
fc = 20MHz 20*10^6
fo = fc*K/(2^32)   (0.004657Hz ~ 10MHz)
K = fo*(2^32)/fc
  = fo*(2^32)/(20*10^6)
**************************************************/

module clk_generator(

input clk,    //20MHz
input rst_n,    //RESET
output reg clk_out
);

parameter  FREQ_WORD = 32'd214748;    //1Hz 214.748,
/*----------------------------------------
32'd214748~1s~1Hz,
32'd21475~10s~0.1Hz,
32'd2147~100s~0.01Hz
32'd214748*N ~ NHz
------------------------------------------*/
//---------------------------------------------------

reg [31:0]    max_value;

always@(posedge clk or negedge rst_n)
begin
if(!rst_n)    max_value <= 1'b0;
    else    max_value <= max_value + FREQ_WORD;
end
//-------------------------------------------
always@(posedge clk or negedge rst_n)
begin
if(!rst_n)    clk_out <= 1'b0;
    else    begin
if (max_value <= 32'h7FFF_FFFF)    clk_out <= 1'b0;
else    clk_out <= 1'b1;
        end
end
endmodule

通过对FREQ_WORD的修改达到任意分频的目的。

转载于:https://www.cnblogs.com/cheetah/archive/2011/12/04/2275530.html