/**
* A random and sequential accessible sequence of zero or more bytes (octets).
* This interface provides an abstract view for one or more primitive byte
* arrays ({@code byte[]}) and {@linkplain ByteBuffer NIO buffers}.
*
* <h3>Creation of a buffer</h3>
*
* It is recommended to create a new buffer using the helper methods in
* {@link ChannelBuffers} rather than calling an individual implementation's
* constructor.
*
* <h3>Random Access Indexing</h3>
*
* Just like an ordinary primitive byte array, {@link ChannelBuffer} uses
* <a href="http://en.wikipedia.org/wiki/Zero-based_numbering">zero-based indexing</a>.
* It means the index of the first byte is always {@code 0} and the index of the last byte is
* always {@link #capacity() capacity - 1}. For example, to iterate all bytes of a buffer, you
* can do the following, regardless of its internal implementation:
*
* <pre>
* {@link ChannelBuffer} buffer = ...;
* for (int i = 0; i < buffer.capacity(); i ++) {
* byte b = buffer.getByte(i);
* System.out.println((char) b);
* }
* </pre>
*
* <h3>Sequential Access Indexing</h3>
*
* {@link ChannelBuffer} provides two pointer variables to support sequential
* read and write operations - {@link #readerIndex() readerIndex} for a read
* operation and {@link #writerIndex() writerIndex} for a write operation
* respectively. The following diagram shows how a buffer is segmented into
* three areas by the two pointers:
*
* <pre>
* +-------------------+------------------+------------------+
* | discardable bytes | readable bytes | writable bytes |
* | | (CONTENT) | |
* +-------------------+------------------+------------------+
* | | | |
* 0 <= readerIndex <= writerIndex <= capacity
* </pre>
*
* <h4>Readable bytes (the actual content)</h4>
*
* This segment is where the actual data is stored. Any operation whose name
* starts with {@code read} or {@code skip} will get or skip the data at the
* current {@link #readerIndex() readerIndex} and increase it by the number of
* read bytes. If the argument of the read operation is also a
* {@link ChannelBuffer} and no destination index is specified, the specified
* buffer's {@link #readerIndex() readerIndex} is increased together.
* <p>
* If there's not enough content left, {@link IndexOutOfBoundsException} is
* raised. The default value of newly allocated, wrapped or copied buffer's
* {@link #readerIndex() readerIndex} is {@code 0}.
*
* <pre>
* // Iterates the readable bytes of a buffer.
* {@link ChannelBuffer} buffer = ...;
* while (buffer.readable()) {
* System.out.println(buffer.readByte());
* }
* </pre>
*
* <h4>Writable bytes</h4>
*
* This segment is a undefined space which needs to be filled. Any operation
* whose name ends with {@code write} will write the data at the current
* {@link #writerIndex() writerIndex} and increase it by the number of written
* bytes. If the argument of the write operation is also a {@link ChannelBuffer},
* and no source index is specified, the specified buffer's
* {@link #readerIndex() readerIndex} is increased together.
* <p>
* If there's not enough writable bytes left, {@link IndexOutOfBoundsException}
* is raised. The default value of newly allocated buffer's
* {@link #writerIndex() writerIndex} is {@code 0}. The default value of
* wrapped or copied buffer's {@link #writerIndex() writerIndex} is the
* {@link #capacity() capacity} of the buffer.
*
* <pre>
* // Fills the writable bytes of a buffer with random integers.
* {@link ChannelBuffer} buffer = ...;
* while (buffer.writableBytes() >= 4) {
* buffer.writeInt(random.nextInt());
* }
* </pre>
*
* <h4>Discardable bytes</h4>
*
* This segment contains the bytes which were read already by a read operation.
* Initially, the size of this segment is {@code 0}, but its size increases up
* to the {@link #writerIndex() writerIndex} as read operations are executed.
* The read bytes can be discarded by calling {@link #discardReadBytes()} to
* reclaim unused area as depicted by the following diagram:
*
* <pre>
* BEFORE discardReadBytes()
*
* +-------------------+------------------+------------------+
* | discardable bytes | readable bytes | writable bytes |
* +-------------------+------------------+------------------+
* | | | |
* 0 <= readerIndex <= writerIndex <= capacity
*
*
* AFTER discardReadBytes()
*
* +------------------+--------------------------------------+
* | readable bytes | writable bytes (got more space) |
* +------------------+--------------------------------------+
* | | |
* readerIndex (0) <= writerIndex (decreased) <= capacity
* </pre>
*
* Please note that there is no guarantee about the content of writable bytes
* after calling {@link #discardReadBytes()}. The writable bytes will not be
* moved in most cases and could even be filled with completely different data
* depending on the underlying buffer implementation.
*
* <h4>Clearing the buffer indexes</h4>
*
* You can set both {@link #readerIndex() readerIndex} and
* {@link #writerIndex() writerIndex} to {@code 0} by calling {@link #clear()}.
* It does not clear the buffer content (e.g. filling with {@code 0}) but just
* clears the two pointers. Please also note that the semantic of this
* operation is different from {@link ByteBuffer#clear()}.
*
* <pre>
* BEFORE clear()
*
* +-------------------+------------------+------------------+
* | discardable bytes | readable bytes | writable bytes |
* +-------------------+------------------+------------------+
* | | | |
* 0 <= readerIndex <= writerIndex <= capacity
*
*
* AFTER clear()
*
* +---------------------------------------------------------+
* | writable bytes (got more space) |
* +---------------------------------------------------------+
* | |
* 0 = readerIndex = writerIndex <= capacity
* </pre>
*
* <h3>Search operations</h3>
*
* Various {@link #indexOf(int, int, byte)} methods help you locate an index of
* a value which meets a certain criteria. Complicated dynamic sequential
* search can be done with {@link ChannelBufferIndexFinder} as well as simple
* static single byte search.
* <p>
* If you are decoding variable length data such as NUL-terminated string, you
* will find {@link #bytesBefore(byte)} also useful.
*
* <h3>Mark and reset</h3>
*
* There are two marker indexes in every buffer. One is for storing
* {@link #readerIndex() readerIndex} and the other is for storing
* {@link #writerIndex() writerIndex}. You can always reposition one of the
* two indexes by calling a reset method. It works in a similar fashion to
* the mark and reset methods in {@link InputStream} except that there's no
* {@code readlimit}.
*
* <h3>Derived buffers</h3>
*
* You can create a view of an existing buffer by calling either
* {@link #duplicate()}, {@link #slice()} or {@link #slice(int, int)}.
* A derived buffer will have an independent {@link #readerIndex() readerIndex},
* {@link #writerIndex() writerIndex} and marker indexes, while it shares
* other internal data representation, just like a NIO buffer does.
* <p>
* In case a completely fresh copy of an existing buffer is required, please
* call {@link #copy()} method instead.
*
* <h3>Conversion to existing JDK types</h3>
*
* <h4>Byte array</h4>
*
* If a {@link ChannelBuffer} is backed by a byte array (i.e. {@code byte[]}),
* you can access it directly via the {@link #array()} method. To determine
* if a buffer is backed by a byte array, {@link #hasArray()} should be used.
*
* <h4>NIO Buffers</h4>
*
* Various {@link #toByteBuffer()} and {@link #toByteBuffers()} methods convert
* a {@link ChannelBuffer} into one or more NIO buffers. These methods avoid
* buffer allocation and memory copy whenever possible, but there's no
* guarantee that memory copy will not be involved.
*
* <h4>Strings</h4>
*
* Various {@link #toString(String)} methods convert a {@link ChannelBuffer}
* into a {@link String}. Please note that {@link #toString()} is not a
* conversion method.
*
* <h4>I/O Streams</h4>
*
* Please refer to {@link ChannelBufferInputStream} and
* {@link ChannelBufferOutputStream}.
*
* @apiviz.landmark
*/
public interface ChannelBuffer extends Comparable<ChannelBuffer> {
/**
* Returns the factory which creates a {@link ChannelBuffer} whose
* type and default {@link ByteOrder} are same with this buffer.
*/
ChannelBufferFactory factory();
/**
* Returns the number of bytes (octets) this buffer can contain.
*/
int capacity();
/**
* Returns the <a href="http://en.wikipedia.org/wiki/Endianness">endianness</a>
* of this buffer.
*/
ByteOrder order();
/**
* Returns {@code true} if and only if this buffer is backed by an
* NIO direct buffer.
*/
boolean isDirect();
/**
* Returns the {@code readerIndex} of this buffer.
*/
int readerIndex();
/**
* Sets the {@code readerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code readerIndex} is
* less than {@code 0} or
* greater than {@code this.writerIndex}
*/
void readerIndex(int readerIndex);
/**
* Returns the {@code writerIndex} of this buffer.
*/
int writerIndex();
/**
* Sets the {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code writerIndex} is
* less than {@code this.readerIndex} or
* greater than {@code this.capacity}
*/
void writerIndex(int writerIndex);
/**
* Sets the {@code readerIndex} and {@code writerIndex} of this buffer
* in one shot. This method is useful when you have to worry about the
* invocation order of {@link #readerIndex(int)} and {@link #writerIndex(int)}
* methods. For example, the following code will fail:
*
* <pre>
* // Create a buffer whose readerIndex, writerIndex and capacity are
* // 0, 0 and 8 respectively.
* {@link ChannelBuffer} buf = {@link ChannelBuffers}.buffer(8);
*
* // IndexOutOfBoundsException is thrown because the specified
* // readerIndex (2) cannot be greater than the current writerIndex (0).
* buf.readerIndex(2);
* buf.writerIndex(4);
* </pre>
*
* The following code will also fail:
*
* <pre>
* // Create a buffer whose readerIndex, writerIndex and capacity are
* // 0, 8 and 8 respectively.
* {@link ChannelBuffer} buf = {@link ChannelBuffers}.wrappedBuffer(new byte[8]);
*
* // readerIndex becomes 8.
* buf.readLong();
*
* // IndexOutOfBoundsException is thrown because the specified
* // writerIndex (4) cannot be less than the current readerIndex (8).
* buf.writerIndex(4);
* buf.readerIndex(2);
* </pre>
*
* By contrast, {@link #setIndex(int, int)} guarantees that it never
* throws an {@link IndexOutOfBoundsException} as long as the specified
* indexes meet basic constraints, regardless what the current index
* values of the buffer are:
*
* <pre>
* // No matter what the current state of the buffer is, the following
* // call always succeeds as long as the capacity of the buffer is not
* // less than 4.
* buf.setIndex(2, 4);
* </pre>
*
* @throws IndexOutOfBoundsException
* if the specified {@code readerIndex} is less than 0,
* if the specified {@code writerIndex} is less than the specified
* {@code readerIndex} or if the specified {@code writerIndex} is
* greater than {@code this.capacity}
*/
void setIndex(int readerIndex, int writerIndex);
/**
* Returns the number of readable bytes which is equal to
* {@code (this.writerIndex - this.readerIndex)}.
*/
int readableBytes();
/**
* Returns the number of writable bytes which is equal to
* {@code (this.capacity - this.writerIndex)}.
*/
int writableBytes();
/**
* Returns {@code true}
* if and only if {@code (this.writerIndex - this.readerIndex)} is greater
* than {@code 0}.
*/
boolean readable();
/**
* Returns {@code true}
* if and only if {@code (this.capacity - this.writerIndex)} is greater
* than {@code 0}.
*/
boolean writable();
/**
* Sets the {@code readerIndex} and {@code writerIndex} of this buffer to
* {@code 0}.
* This method is identical to {@link #setIndex(int, int) setIndex(0, 0)}.
* <p>
* Please note that the behavior of this method is different
* from that of NIO buffer, which sets the {@code limit} to
* the {@code capacity} of the buffer.
*/
void clear();
/**
* Marks the current {@code readerIndex} in this buffer. You can
* reposition the current {@code readerIndex} to the marked
* {@code readerIndex} by calling {@link #resetReaderIndex()}.
* The initial value of the marked {@code readerIndex} is {@code 0}.
*/
void markReaderIndex();
/**
* Repositions the current {@code readerIndex} to the marked
* {@code readerIndex} in this buffer.
*
* @throws IndexOutOfBoundsException
* if the current {@code writerIndex} is less than the marked
* {@code readerIndex}
*/
void resetReaderIndex();
/**
* Marks the current {@code writerIndex} in this buffer. You can
* reposition the current {@code writerIndex} to the marked
* {@code writerIndex} by calling {@link #resetWriterIndex()}.
* The initial value of the marked {@code writerIndex} is {@code 0}.
*/
void markWriterIndex();
/**
* Repositions the current {@code writerIndex} to the marked
* {@code writerIndex} in this buffer.
*
* @throws IndexOutOfBoundsException
* if the current {@code readerIndex} is greater than the marked
* {@code writerIndex}
*/
void resetWriterIndex();
/**
* Discards the bytes between the 0th index and {@code readerIndex}.
* It moves the bytes between {@code readerIndex} and {@code writerIndex}
* to the 0th index, and sets {@code readerIndex} and {@code writerIndex}
* to {@code 0} and {@code oldWriterIndex - oldReaderIndex} respectively.
* <p>
* Please refer to the class documentation for more detailed explanation.
*/
void discardReadBytes();
/**
* Makes sure the number of {@linkplain #writableBytes() the writable bytes}
* is equal to or greater than the specified value. If there is enough
* writable bytes in this buffer, this method returns with no side effect.
* Otherwise:
* <ul>
* <li>a non-dynamic buffer will throw an {@link IndexOutOfBoundsException}.</li>
* <li>a dynamic buffer will expand its capacity so that the number of the
* {@link #writableBytes() writable bytes} becomes equal to or greater
* than the specified value. The expansion involves the reallocation of
* the internal buffer and consequently memory copy.</li>
* </ul>
*
* @param writableBytes
* the expected minimum number of writable bytes
* @throws IndexOutOfBoundsException
* if {@linkplain #writableBytes() the writable bytes} of this
* buffer is less than the specified value and if this buffer is
* not a dynamic buffer
*/
void ensureWritableBytes(int writableBytes);
/**
* Gets a byte at the specified absolute {@code index} in this buffer.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 1} is greater than {@code this.capacity}
*/
byte getByte(int index);
/**
* Gets an unsigned byte at the specified absolute {@code index} in this
* buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 1} is greater than {@code this.capacity}
*/
short getUnsignedByte(int index);
/**
* Gets a 16-bit short integer at the specified absolute {@code index} in
* this buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 2} is greater than {@code this.capacity}
*/
short getShort(int index);
/**
* Gets an unsigned 16-bit short integer at the specified absolute
* {@code index} in this buffer. This method does not modify
* {@code readerIndex} or {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 2} is greater than {@code this.capacity}
*/
int getUnsignedShort(int index);
/**
* Gets a 24-bit medium integer at the specified absolute {@code index} in
* this buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 3} is greater than {@code this.capacity}
*/
int getMedium(int index);
/**
* Gets an unsigned 24-bit medium integer at the specified absolute
* {@code index} in this buffer. This method does not modify
* {@code readerIndex} or {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 3} is greater than {@code this.capacity}
*/
int getUnsignedMedium(int index);
/**
* Gets a 32-bit integer at the specified absolute {@code index} in
* this buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 4} is greater than {@code this.capacity}
*/
int getInt(int index);
/**
* Gets an unsigned 32-bit integer at the specified absolute {@code index}
* in this buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 4} is greater than {@code this.capacity}
*/
long getUnsignedInt(int index);
/**
* Gets a 64-bit long integer at the specified absolute {@code index} in
* this buffer. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 8} is greater than {@code this.capacity}
*/
long getLong(int index);
/**
* Gets a 2-byte UTF-16 character at the specified absolute
* {@code index} in this buffer. This method does not modify
* {@code readerIndex} or {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 2} is greater than {@code this.capacity}
*/
char getChar(int index);
/**
* Gets a 32-bit floating point number at the specified absolute
* {@code index} in this buffer. This method does not modify
* {@code readerIndex} or {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 4} is greater than {@code this.capacity}
*/
float getFloat(int index);
/**
* Gets a 64-bit floating point number at the specified absolute
* {@code index} in this buffer. This method does not modify
* {@code readerIndex} or {@code writerIndex} of this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 8} is greater than {@code this.capacity}
*/
double getDouble(int index);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index} until the destination becomes
* non-writable. This method is basically same with
* {@link #getBytes(int, ChannelBuffer, int, int)}, except that this
* method increases the {@code writerIndex} of the destination by the
* number of the transferred bytes while
* {@link #getBytes(int, ChannelBuffer, int, int)} does not.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* the source buffer (i.e. {@code this}).
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + dst.writableBytes} is greater than
* {@code this.capacity}
*/
void getBytes(int index, ChannelBuffer dst);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index}. This method is basically same
* with {@link #getBytes(int, ChannelBuffer, int, int)}, except that this
* method increases the {@code writerIndex} of the destination by the
* number of the transferred bytes while
* {@link #getBytes(int, ChannelBuffer, int, int)} does not.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* the source buffer (i.e. {@code this}).
*
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code length} is greater than {@code dst.writableBytes}
*/
void getBytes(int index, ChannelBuffer dst, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex}
* of both the source (i.e. {@code this}) and the destination.
*
* @param dstIndex the first index of the destination
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if the specified {@code dstIndex} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code dstIndex + length} is greater than
* {@code dst.capacity}
*/
void getBytes(int index, ChannelBuffer dst, int dstIndex, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + dst.length} is greater than
* {@code this.capacity}
*/
void getBytes(int index, byte[] dst);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex}
* of this buffer.
*
* @param dstIndex the first index of the destination
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if the specified {@code dstIndex} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code dstIndex + length} is greater than
* {@code dst.length}
*/
void getBytes(int index, byte[] dst, int dstIndex, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the specified absolute {@code index} until the destination's position
* reaches its limit.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer while the destination's {@code position} will be increased.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + dst.remaining()} is greater than
* {@code this.capacity}
*/
void getBytes(int index, ByteBuffer dst);
/**
* Transfers this buffer's data to the specified stream starting at the
* specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + length} is greater than
* {@code this.capacity}
* @throws IOException
* if the specified stream threw an exception during I/O
*/
void getBytes(int index, OutputStream out, int length) throws IOException;
/**
* Transfers this buffer's data to the specified channel starting at the
* specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @param length the maximum number of bytes to transfer
*
* @return the actual number of bytes written out to the specified channel
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + length} is greater than
* {@code this.capacity}
* @throws IOException
* if the specified channel threw an exception during I/O
*/
int getBytes(int index, GatheringByteChannel out, int length) throws IOException;
/**
* Sets the specified byte at the specified absolute {@code index} in this
* buffer. The 24 high-order bits of the specified value are ignored.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 1} is greater than {@code this.capacity}
*/
void setByte(int index, int value);
/**
* Sets the specified 16-bit short integer at the specified absolute
* {@code index} in this buffer. The 16 high-order bits of the specified
* value are ignored.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 2} is greater than {@code this.capacity}
*/
void setShort(int index, int value);
/**
* Sets the specified 24-bit medium integer at the specified absolute
* {@code index} in this buffer. Please note that the most significant
* byte is ignored in the specified value.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 3} is greater than {@code this.capacity}
*/
void setMedium(int index, int value);
/**
* Sets the specified 32-bit integer at the specified absolute
* {@code index} in this buffer.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 4} is greater than {@code this.capacity}
*/
void setInt(int index, int value);
/**
* Sets the specified 64-bit long integer at the specified absolute
* {@code index} in this buffer.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 8} is greater than {@code this.capacity}
*/
void setLong(int index, long value);
/**
* Sets the specified 2-byte UTF-16 character at the specified absolute
* {@code index} in this buffer.
* The 16 high-order bits of the specified value are ignored.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 2} is greater than {@code this.capacity}
*/
void setChar(int index, int value);
/**
* Sets the specified 32-bit floating-point number at the specified
* absolute {@code index} in this buffer.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 4} is greater than {@code this.capacity}
*/
void setFloat(int index, float value);
/**
* Sets the specified 64-bit floating-point number at the specified
* absolute {@code index} in this buffer.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* {@code index + 8} is greater than {@code this.capacity}
*/
void setDouble(int index, double value);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the specified absolute {@code index} until the source buffer becomes
* unreadable. This method is basically same with
* {@link #setBytes(int, ChannelBuffer, int, int)}, except that this
* method increases the {@code readerIndex} of the source buffer by
* the number of the transferred bytes while
* {@link #setBytes(int, ChannelBuffer, int, int)} does not.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* the source buffer (i.e. {@code this}).
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + src.readableBytes} is greater than
* {@code this.capacity}
*/
void setBytes(int index, ChannelBuffer src);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the specified absolute {@code index}. This method is basically same
* with {@link #setBytes(int, ChannelBuffer, int, int)}, except that this
* method increases the {@code readerIndex} of the source buffer by
* the number of the transferred bytes while
* {@link #setBytes(int, ChannelBuffer, int, int)} does not.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* the source buffer (i.e. {@code this}).
*
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code length} is greater than {@code src.readableBytes}
*/
void setBytes(int index, ChannelBuffer src, int length);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex}
* of both the source (i.e. {@code this}) and the destination.
*
* @param srcIndex the first index of the source
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if the specified {@code srcIndex} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code srcIndex + length} is greater than
* {@code src.capacity}
*/
void setBytes(int index, ChannelBuffer src, int srcIndex, int length);
/**
* Transfers the specified source array's data to this buffer starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + src.length} is greater than
* {@code this.capacity}
*/
void setBytes(int index, byte[] src);
/**
* Transfers the specified source array's data to this buffer starting at
* the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0},
* if the specified {@code srcIndex} is less than {@code 0},
* if {@code index + length} is greater than
* {@code this.capacity}, or
* if {@code srcIndex + length} is greater than {@code src.length}
*/
void setBytes(int index, byte[] src, int srcIndex, int length);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the specified absolute {@code index} until the source buffer's position
* reaches its limit.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + src.remaining()} is greater than
* {@code this.capacity}
*/
void setBytes(int index, ByteBuffer src);
/**
* Transfers the content of the specified source stream to this buffer
* starting at the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @param length the number of bytes to transfer
*
* @return the actual number of bytes read in from the specified channel.
* {@code -1} if the specified channel is closed.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + length} is greater than {@code this.capacity}
* @throws IOException
* if the specified stream threw an exception during I/O
*/
int setBytes(int index, InputStream in, int length) throws IOException;
/**
* Transfers the content of the specified source channel to this buffer
* starting at the specified absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @param length the maximum number of bytes to transfer
*
* @return the actual number of bytes read in from the specified channel.
* {@code -1} if the specified channel is closed.
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + length} is greater than {@code this.capacity}
* @throws IOException
* if the specified channel threw an exception during I/O
*/
int setBytes(int index, ScatteringByteChannel in, int length) throws IOException;
/**
* Fills this buffer with <tt>NUL (0x00)</tt> starting at the specified
* absolute {@code index}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @param length the number of <tt>NUL</tt>s to write to the buffer
*
* @throws IndexOutOfBoundsException
* if the specified {@code index} is less than {@code 0} or
* if {@code index + length} is greater than {@code this.capacity}
*/
void setZero(int index, int length);
/**
* Gets a byte at the current {@code readerIndex} and increases
* the {@code readerIndex} by {@code 1} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 1}
*/
byte readByte();
/**
* Gets an unsigned byte at the current {@code readerIndex} and increases
* the {@code readerIndex} by {@code 1} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 1}
*/
short readUnsignedByte();
/**
* Gets a 16-bit short integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 2} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 2}
*/
short readShort();
/**
* Gets an unsigned 16-bit short integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 2} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 2}
*/
int readUnsignedShort();
/**
* Gets a 24-bit medium integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 3} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 3}
*/
int readMedium();
/**
* Gets an unsigned 24-bit medium integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 3} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 3}
*/
int readUnsignedMedium();
/**
* Gets a 32-bit integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 4} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 4}
*/
int readInt();
/**
* Gets an unsigned 32-bit integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 4} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 4}
*/
long readUnsignedInt();
/**
* Gets a 64-bit integer at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 8} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 8}
*/
long readLong();
/**
* Gets a 2-byte UTF-16 character at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 2} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 2}
*/
char readChar();
/**
* Gets a 32-bit floating point number at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 4} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 4}
*/
float readFloat();
/**
* Gets a 64-bit floating point number at the current {@code readerIndex}
* and increases the {@code readerIndex} by {@code 8} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.readableBytes} is less than {@code 8}
*/
double readDouble();
/**
* Transfers this buffer's data to a newly created buffer starting at
* the current {@code readerIndex} and increases the {@code readerIndex}
* by the number of the transferred bytes (= {@code length}).
* The returned buffer's {@code readerIndex} and {@code writerIndex} are
* {@code 0} and {@code length} respectively.
*
* @param length the number of bytes to transfer
*
* @return the newly created buffer which contains the transferred bytes
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
*/
ChannelBuffer readBytes(int length);
/**
* @deprecated Use {@link #bytesBefore(ChannelBufferIndexFinder)} and {@link #readBytes(int)} instead.
*/
@Deprecated
ChannelBuffer readBytes(ChannelBufferIndexFinder indexFinder);
/**
* Returns a new slice of this buffer's sub-region starting at the current
* {@code readerIndex} and increases the {@code readerIndex} by the size
* of the new slice (= {@code length}).
*
* @param length the size of the new slice
*
* @return the newly created slice
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
*/
ChannelBuffer readSlice(int length);
/**
* @deprecated Use {@link #bytesBefore(ChannelBufferIndexFinder)} and {@link #readSlice(int)} instead.
*/
@Deprecated
ChannelBuffer readSlice(ChannelBufferIndexFinder indexFinder);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} until the destination becomes
* non-writable, and increases the {@code readerIndex} by the number of the
* transferred bytes. This method is basically same with
* {@link #readBytes(ChannelBuffer, int, int)}, except that this method
* increases the {@code writerIndex} of the destination by the number of
* the transferred bytes while {@link #readBytes(ChannelBuffer, int, int)}
* does not.
*
* @throws IndexOutOfBoundsException
* if {@code dst.writableBytes} is greater than
* {@code this.readableBytes}
*/
void readBytes(ChannelBuffer dst);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} and increases the {@code readerIndex}
* by the number of the transferred bytes (= {@code length}). This method
* is basically same with {@link #readBytes(ChannelBuffer, int, int)},
* except that this method increases the {@code writerIndex} of the
* destination by the number of the transferred bytes (= {@code length})
* while {@link #readBytes(ChannelBuffer, int, int)} does not.
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes} or
* if {@code length} is greater than {@code dst.writableBytes}
*/
void readBytes(ChannelBuffer dst, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} and increases the {@code readerIndex}
* by the number of the transferred bytes (= {@code length}).
*
* @param dstIndex the first index of the destination
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code dstIndex} is less than {@code 0},
* if {@code length} is greater than {@code this.readableBytes}, or
* if {@code dstIndex + length} is greater than
* {@code dst.capacity}
*/
void readBytes(ChannelBuffer dst, int dstIndex, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} and increases the {@code readerIndex}
* by the number of the transferred bytes (= {@code dst.length}).
*
* @throws IndexOutOfBoundsException
* if {@code dst.length} is greater than {@code this.readableBytes}
*/
void readBytes(byte[] dst);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} and increases the {@code readerIndex}
* by the number of the transferred bytes (= {@code length}).
*
* @param dstIndex the first index of the destination
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code dstIndex} is less than {@code 0},
* if {@code length} is greater than {@code this.readableBytes}, or
* if {@code dstIndex + length} is greater than {@code dst.length}
*/
void readBytes(byte[] dst, int dstIndex, int length);
/**
* Transfers this buffer's data to the specified destination starting at
* the current {@code readerIndex} until the destination's position
* reaches its limit, and increases the {@code readerIndex} by the
* number of the transferred bytes.
*
* @throws IndexOutOfBoundsException
* if {@code dst.remaining()} is greater than
* {@code this.readableBytes}
*/
void readBytes(ByteBuffer dst);
/**
* Transfers this buffer's data to the specified stream starting at the
* current {@code readerIndex}.
*
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
* @throws IOException
* if the specified stream threw an exception during I/O
*/
void readBytes(OutputStream out, int length) throws IOException;
/**
* Transfers this buffer's data to the specified stream starting at the
* current {@code readerIndex}.
*
* @param length the maximum number of bytes to transfer
*
* @return the actual number of bytes written out to the specified channel
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
* @throws IOException
* if the specified channel threw an exception during I/O
*/
int readBytes(GatheringByteChannel out, int length) throws IOException;
/**
* Increases the current {@code readerIndex} by the specified
* {@code length} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
*/
void skipBytes(int length);
/**
* @deprecated Use {@link #bytesBefore(ChannelBufferIndexFinder)} and {@link #skipBytes(int)} instead.
*/
@Deprecated
int skipBytes(ChannelBufferIndexFinder indexFinder);
/**
* Sets the specified byte at the current {@code writerIndex}
* and increases the {@code writerIndex} by {@code 1} in this buffer.
* The 24 high-order bits of the specified value are ignored.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 1}
*/
void writeByte(int value);
/**
* Sets the specified 16-bit short integer at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 2}
* in this buffer. The 16 high-order bits of the specified value are ignored.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 2}
*/
void writeShort(int value);
/**
* Sets the specified 24-bit medium integer at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 3}
* in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 3}
*/
void writeMedium(int value);
/**
* Sets the specified 32-bit integer at the current {@code writerIndex}
* and increases the {@code writerIndex} by {@code 4} in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 4}
*/
void writeInt(int value);
/**
* Sets the specified 64-bit long integer at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 8}
* in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 8}
*/
void writeLong(long value);
/**
* Sets the specified 2-byte UTF-16 character at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 2}
* in this buffer. The 16 high-order bits of the specified value are ignored.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 2}
*/
void writeChar(int value);
/**
* Sets the specified 32-bit floating point number at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 4}
* in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 4}
*/
void writeFloat(float value);
/**
* Sets the specified 64-bit floating point number at the current
* {@code writerIndex} and increases the {@code writerIndex} by {@code 8}
* in this buffer.
*
* @throws IndexOutOfBoundsException
* if {@code this.writableBytes} is less than {@code 8}
*/
void writeDouble(double value);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the current {@code writerIndex} until the source buffer becomes
* unreadable, and increases the {@code writerIndex} by the number of
* the transferred bytes. This method is basically same with
* {@link #writeBytes(ChannelBuffer, int, int)}, except that this method
* increases the {@code readerIndex} of the source buffer by the number of
* the transferred bytes while {@link #writeBytes(ChannelBuffer, int, int)}
* does not.
*
* @throws IndexOutOfBoundsException
* if {@code src.readableBytes} is greater than
* {@code this.writableBytes}
*/
void writeBytes(ChannelBuffer src);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the current {@code writerIndex} and increases the {@code writerIndex}
* by the number of the transferred bytes (= {@code length}). This method
* is basically same with {@link #writeBytes(ChannelBuffer, int, int)},
* except that this method increases the {@code readerIndex} of the source
* buffer by the number of the transferred bytes (= {@code length}) while
* {@link #writeBytes(ChannelBuffer, int, int)} does not.
*
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.writableBytes} or
* if {@code length} is greater then {@code src.readableBytes}
*/
void writeBytes(ChannelBuffer src, int length);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the current {@code writerIndex} and increases the {@code writerIndex}
* by the number of the transferred bytes (= {@code length}).
*
* @param srcIndex the first index of the source
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code srcIndex} is less than {@code 0},
* if {@code srcIndex + length} is greater than
* {@code src.capacity}, or
* if {@code length} is greater than {@code this.writableBytes}
*/
void writeBytes(ChannelBuffer src, int srcIndex, int length);
/**
* Transfers the specified source array's data to this buffer starting at
* the current {@code writerIndex} and increases the {@code writerIndex}
* by the number of the transferred bytes (= {@code src.length}).
*
* @throws IndexOutOfBoundsException
* if {@code src.length} is greater than {@code this.writableBytes}
*/
void writeBytes(byte[] src);
/**
* Transfers the specified source array's data to this buffer starting at
* the current {@code writerIndex} and increases the {@code writerIndex}
* by the number of the transferred bytes (= {@code length}).
*
* @param srcIndex the first index of the source
* @param length the number of bytes to transfer
*
* @throws IndexOutOfBoundsException
* if the specified {@code srcIndex} is less than {@code 0},
* if {@code srcIndex + length} is greater than
* {@code src.length}, or
* if {@code length} is greater than {@code this.writableBytes}
*/
void writeBytes(byte[] src, int srcIndex, int length);
/**
* Transfers the specified source buffer's data to this buffer starting at
* the current {@code writerIndex} until the source buffer's position
* reaches its limit, and increases the {@code writerIndex} by the
* number of the transferred bytes.
*
* @throws IndexOutOfBoundsException
* if {@code src.remaining()} is greater than
* {@code this.writableBytes}
*/
void writeBytes(ByteBuffer src);
/**
* Transfers the content of the specified stream to this buffer
* starting at the current {@code writerIndex} and increases the
* {@code writerIndex} by the number of the transferred bytes.
*
* @param length the number of bytes to transfer
*
* @return the actual number of bytes read in from the specified stream
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.writableBytes}
* @throws IOException
* if the specified stream threw an exception during I/O
*/
int writeBytes(InputStream in, int length) throws IOException;
/**
* Transfers the content of the specified channel to this buffer
* starting at the current {@code writerIndex} and increases the
* {@code writerIndex} by the number of the transferred bytes.
*
* @param length the maximum number of bytes to transfer
*
* @return the actual number of bytes read in from the specified channel
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.writableBytes}
* @throws IOException
* if the specified channel threw an exception during I/O
*/
int writeBytes(ScatteringByteChannel in, int length) throws IOException;
/**
* Fills this buffer with <tt>NUL (0x00)</tt> starting at the current
* {@code writerIndex} and increases the {@code writerIndex} by the
* specified {@code length}.
*
* @param length the number of <tt>NUL</tt>s to write to the buffer
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.writableBytes}
*/
void writeZero(int length);
/**
* Locates the first occurrence of the specified {@code value} in this
* buffer. The search takes place from the specified {@code fromIndex}
* (inclusive) to the specified {@code toIndex} (exclusive).
* <p>
* If {@code fromIndex} is greater than {@code toIndex}, the search is
* performed in a reversed order.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the absolute index of the first occurrence if found.
* {@code -1} otherwise.
*/
int indexOf(int fromIndex, int toIndex, byte value);
/**
* Locates the first place where the specified {@code indexFinder}
* returns {@code true}. The search takes place from the specified
* {@code fromIndex} (inclusive) to the specified {@code toIndex}
* (exclusive).
* <p>
* If {@code fromIndex} is greater than {@code toIndex}, the search is
* performed in a reversed order.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the absolute index where the specified {@code indexFinder}
* returned {@code true}. {@code -1} if the {@code indexFinder}
* did not return {@code true} at all.
*/
int indexOf(int fromIndex, int toIndex, ChannelBufferIndexFinder indexFinder);
/**
* Locates the first occurrence of the specified {@code value} in this
* buffer. The search takes place from the current {@code readerIndex}
* (inclusive) to the current {@code writerIndex} (exclusive).
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the current {@code readerIndex}
* and the first occurrence if found. {@code -1} otherwise.
*/
int bytesBefore(byte value);
/**
* Locates the first place where the specified {@code indexFinder} returns
* {@code true}. The search takes place from the current {@code readerIndex}
* (inclusive) to the current {@code writerIndex}.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the current {@code readerIndex}
* and the first place where the {@code indexFinder} returned
* {@code true}. {@code -1} if the {@code indexFinder} did not
* return {@code true} at all.
*/
int bytesBefore(ChannelBufferIndexFinder indexFinder);
/**
* Locates the first occurrence of the specified {@code value} in this
* buffer. The search starts from the current {@code readerIndex}
* (inclusive) and lasts for the specified {@code length}.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the current {@code readerIndex}
* and the first occurrence if found. {@code -1} otherwise.
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
*/
int bytesBefore(int length, byte value);
/**
* Locates the first place where the specified {@code indexFinder} returns
* {@code true}. The search starts the current {@code readerIndex}
* (inclusive) and lasts for the specified {@code length}.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the current {@code readerIndex}
* and the first place where the {@code indexFinder} returned
* {@code true}. {@code -1} if the {@code indexFinder} did not
* return {@code true} at all.
*
* @throws IndexOutOfBoundsException
* if {@code length} is greater than {@code this.readableBytes}
*/
int bytesBefore(int length, ChannelBufferIndexFinder indexFinder);
/**
* Locates the first occurrence of the specified {@code value} in this
* buffer. The search starts from the specified {@code index} (inclusive)
* and lasts for the specified {@code length}.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the specified {@code index}
* and the first occurrence if found. {@code -1} otherwise.
*
* @throws IndexOutOfBoundsException
* if {@code index + length} is greater than {@code this.capacity}
*/
int bytesBefore(int index, int length, byte value);
/**
* Locates the first place where the specified {@code indexFinder} returns
* {@code true}. The search starts the specified {@code index} (inclusive)
* and lasts for the specified {@code length}.
* <p>
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @return the number of bytes between the specified {@code index}
* and the first place where the {@code indexFinder} returned
* {@code true}. {@code -1} if the {@code indexFinder} did not
* return {@code true} at all.
*
* @throws IndexOutOfBoundsException
* if {@code index + length} is greater than {@code this.capacity}
*/
int bytesBefore(int index, int length, ChannelBufferIndexFinder indexFinder);
/**
* Returns a copy of this buffer's readable bytes. Modifying the content
* of the returned buffer or this buffer does not affect each other at all.
* This method is identical to {@code buf.copy(buf.readerIndex(), buf.readableBytes())}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ChannelBuffer copy();
/**
* Returns a copy of this buffer's sub-region. Modifying the content of
* the returned buffer or this buffer does not affect each other at all.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ChannelBuffer copy(int index, int length);
/**
* Returns a slice of this buffer's readable bytes. Modifying the content
* of the returned buffer or this buffer affects each other's content
* while they maintain separate indexes and marks. This method is
* identical to {@code buf.slice(buf.readerIndex(), buf.readableBytes())}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ChannelBuffer slice();
/**
* Returns a slice of this buffer's sub-region. Modifying the content of
* the returned buffer or this buffer affects each other's content while
* they maintain separate indexes and marks.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ChannelBuffer slice(int index, int length);
/**
* Returns a buffer which shares the whole region of this buffer.
* Modifying the content of the returned buffer or this buffer affects
* each other's content while they maintain separate indexes and marks.
* This method is identical to {@code buf.slice(0, buf.capacity())}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ChannelBuffer duplicate();
/**
* Converts this buffer's readable bytes into a NIO buffer. The returned
* buffer might or might not share the content with this buffer, while
* they have separate indexes and marks. This method is identical to
* {@code buf.toByteBuffer(buf.readerIndex(), buf.readableBytes())}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ByteBuffer toByteBuffer();
/**
* Converts this buffer's sub-region into a NIO buffer. The returned
* buffer might or might not share the content with this buffer, while
* they have separate indexes and marks.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ByteBuffer toByteBuffer(int index, int length);
/**
* Converts this buffer's readable bytes into an array of NIO buffers.
* The returned buffers might or might not share the content with this
* buffer, while they have separate indexes and marks. This method is
* identical to {@code buf.toByteBuffers(buf.readerIndex(), buf.readableBytes())}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ByteBuffer[] toByteBuffers();
/**
* Converts this buffer's sub-region into an array of NIO buffers.
* The returned buffers might or might not share the content with this
* buffer, while they have separate indexes and marks.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*/
ByteBuffer[] toByteBuffers(int index, int length);
/**
* Returns {@code true} if and only if this buffer has a backing byte array.
* If this method returns true, you can safely call {@link #array()} and
* {@link #arrayOffset()}.
*/
boolean hasArray();
/**
* Returns the backing byte array of this buffer.
*
* @throws UnsupportedOperationException
* if there no accessible backing byte array
*/
byte[] array();
/**
* Returns the offset of the first byte within the backing byte array of
* this buffer.
*
* @throws UnsupportedOperationException
* if there no accessible backing byte array
*/
int arrayOffset();
/**
* Decodes this buffer's readable bytes into a string with the specified
* character set name. This method is identical to
* {@code buf.toString(buf.readerIndex(), buf.readableBytes(), charsetName)}.
* This method does not modify {@code readerIndex} or {@code writerIndex} of
* this buffer.
*
* @throws UnsupportedCharsetException
* if the specified character set name is not supported by the
* current VM
*/
String toString(Charset charset);
/**
* Decodes this buffer's sub-region into a string with the specified
* character set. This method does not modify {@code readerIndex} or
* {@code writerIndex} of this buffer.
*/
String toString(int index, int length, Charset charset);
/**
* @deprecated Use {@link #toString(Charset)} instead.
*/
@Deprecated
String toString(String charsetName);
/**
* @deprecated Use {@link #bytesBefore(ChannelBufferIndexFinder)} and {@link #toString(int, int, Charset)} instead.
*/
@Deprecated
String toString(
String charsetName, ChannelBufferIndexFinder terminatorFinder);
/**
* @deprecated Use {@link #bytesBefore(int, int, ChannelBufferIndexFinder)} and
* {@link #toString(int, int, Charset)} instead.
*/
@Deprecated
String toString(int index, int length, String charsetName);
/**
* @deprecated Use {@link #bytesBefore(int, int, ChannelBufferIndexFinder)} and
* {@link #toString(int, int, Charset)} instead.
*/
@Deprecated
String toString(
int index, int length, String charsetName,
ChannelBufferIndexFinder terminatorFinder);
/**
* Returns a hash code which was calculated from the content of this
* buffer. If there's a byte array which is
* {@linkplain #equals(Object) equal to} this array, both arrays should
* return the same value.
*/
int hashCode();
/**
* Determines if the content of the specified buffer is identical to the
* content of this array. 'Identical' here means:
* <ul>
* <li>the size of the contents of the two buffers are same and</li>
* <li>every single byte of the content of the two buffers are same.</li>
* </ul>
* Please note that it does not compare {@link #readerIndex()} nor
* {@link #writerIndex()}. This method also returns {@code false} for
* {@code null} and an object which is not an instance of
* {@link ChannelBuffer} type.
*/
boolean equals(Object obj);
/**
* Compares the content of the specified buffer to the content of this
* buffer. Comparison is performed in the same manner with the string
* comparison functions of various languages such as {@code strcmp},
* {@code memcmp} and {@link String#compareTo(String)}.
*/
int compareTo(ChannelBuffer buffer);
/**
* Returns the string representation of this buffer. This method does not
* necessarily return the whole content of the buffer but returns
* the values of the key properties such as {@link #readerIndex()},
* {@link #writerIndex()} and {@link #capacity()}.
*/
String toString();
}
* I/O Request
* via {@link Channel} or
* {@link ChannelHandlerContext}
* |
* +----------------------------------------+---------------+
* | ChannelPipeline | |
* | \|/ |
* | +----------------------+ +-----------+------------+ |
* | | Upstream Handler N | | Downstream Handler 1 | |
* | +----------+-----------+ +-----------+------------+ |
* | /|\ | |
* | | \|/ |
* | +----------+-----------+ +-----------+------------+ |
* | | Upstream Handler N-1 | | Downstream Handler 2 | |
* | +----------+-----------+ +-----------+------------+ |
* | /|\ . |
* | . . |
* | [ sendUpstream() ] [ sendDownstream() ] |
* | [ + INBOUND data ] [ + OUTBOUND data ] |
* | . . |
* | . \|/ |
* | +----------+-----------+ +-----------+------------+ |
* | | Upstream Handler 2 | | Downstream Handler M-1 | |
* | +----------+-----------+ +-----------+------------+ |
* | /|\ | |
* | | \|/ |
* | +----------+-----------+ +-----------+------------+ |
* | | Upstream Handler 1 | | Downstream Handler M | |
* | +----------+-----------+ +-----------+------------+ |
* | /|\ | |
* +-------------+--------------------------+---------------+
* | \|/
* +-------------+--------------------------+---------------+
* | | | |
* | [ Socket.read() ] [ Socket.write() ] |
* | |
* | Netty Internal I/O Threads (Transport Implementation) |
* +--------------------------------------------------------+
1084
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
