Link Layer Discovery Protocol

最新推荐文章于 2023-06-24 22:44:37 发布

weixin_33862041

最新推荐文章于 2023-06-24 22:44:37 发布

阅读量541

点赞数

文章标签：数据库 python

原文链接：https://my.oschina.net/leblancs/blog/798668

版权

2019独角兽企业重金招聘Python工程师标准>>>

The Link Layer Discovery Protocol (LLDP) is a vendor-neutral link layer protocol in the Internet Protocol Suite used by network devices for advertising their identity, capabilities, and neighbors on an IEEE 802local area network, principally wired Ethernet.[1] The protocol is formally referred to by the IEEE as Station and Media Access Control Connectivity Discovery specified in IEEE 802.1AB[2] and IEEE 802.3-2012 section 6 clause 79.

LLDP performs functions similar to several proprietary protocols, such as Cisco Discovery Protocol, Foundry Discovery Protocol, Nortel Discovery Protocol and Link Layer Topology Discovery.

[hide]

Information gathered[edit]

Information gathered with LLDP is stored in the device as a management information database (MIB) and can be queried with the Simple Network Management Protocol (SNMP) as specified in RFC 2922. The topology of an LLDP-enabled network can be discovered by crawling the hosts and querying this database. Information that may be retrieved include:

System name and description
Port name and description
VLAN name
IP management address
System capabilities (switching, routing, etc.)
MAC/PHY information
MDI power
Link aggregation

Applications[edit]

The Link Layer Discovery Protocol may be used as a component in network management and monitoring applications. One such example is its use in data center bridging requirements.[3]

The Data Center Bridging Capabilities Exchange Protocol (DCBX) is a discovery and capability exchange protocol that is used for conveying capabilities and configuration of the above features between neighbors to ensure consistent configuration across the network.[4]

Frame structure[edit]

LLDP information is sent by devices from each of their interfaces at a fixed interval, in the form of an Ethernet frame. Each frame contains one LLDP Data Unit (LLDPDU). Each LLDPDU is a sequence of type-length-value (TLV) structures.

The Ethernet frame used in LLDP has its destination MAC address typically set to a special multicast address that 802.1D-compliant bridges do not forward.[note 1] Other multicast and unicast destination addresses are permitted. The EtherType field is set to 0x88cc.

Each LLDP frame starts with the following mandatory TLVs: Chassis ID, Port ID, and Time-to-Live. The mandatory TLVs are followed by any number of optional TLVs. The frame ends with a special TLV, named end of LLDPDU in which both the type and length fields are 0.

Accordingly, an Ethernet frame containing an LLDPDU has the following structure:

LLDP Ethernet frame structure

Preamble	Destination MAC	Source MAC	Ethertype	Chassis ID TLV	Port ID TLV	Time to live TLV	Optional TLVs	End of LLDPDU TLV	Frame check sequence
	01:80:c2:00:00:0e, or 01:80:c2:00:00:03, or 01:80:c2:00:00:00	Station's address	0x88CC	Type=1	Type=2	Type=3	Zero or more complete TLVs	Type=0, Length=0

Each of the TLV components has the following basic structure:

TLV structure

Type	Length	Value
7 bits	9 bits	0-511 octets

Custom TLVs[note 2] are supported via a TLV type 127. The value of a custom TLV starts with a 24-bit organizationally unique identifier and a 1 byte organizationally specific subtype followed by data. The basic format for an organizationally specific TLV is shown below:

Organizationally specific TLV

Type	Length	Organizationally unique identifier (OUI)	Organizationally defined subtype	Organizationally defined information string
7 bits—127	9 bits	24 bits	8 bits	0-507 octets

According to IEEE Std 802.1AB, §9.6.1.3, "The Organizationally Unique Identifier shall contain the organization's OUI as defined in IEEE Std 802-2001." Each organization is responsible for managing their subtypes.

Media endpoint discovery extension [edit]

Media Endpoint Discovery is an enhancement of LLDP, known as LLDP-MED, that provides the following facilities:

Auto-discovery of LAN policies (such as VLAN, Layer 2 Priority and Differentiated services (Diffserv) settings) enabling plug and playnetworking.
Device location discovery to allow creation of location databases and, in the case of Voice over Internet Protocol (VoIP), Enhanced 911 services.
Extended and automated power management of Power over Ethernet (PoE) end points.
Inventory management, allowing network administrators to track their network devices, and determine their characteristics (manufacturer, software and hardware versions, serial or asset number).

The LLDP-MED protocol extension was formally approved and published as the standard ANSI/TIA-1057 by the Telecommunications Industry Association(TIA) in April 2006.[5]

Notes[edit]

Jump up^ IEEE 802.1AB-2009 suggests three such addresses, 01:80:c2:00:00:0e, 01:80:c2:00:00:03 and 01:80:c2:00:00:00.
Jump up^ Termed Organizationally Specific TLVs by IEEE 802.1AB