Mask rcn nanchor部分理解

Anchors

 

Mask 生成锚框本质与SSD一样
中心点个数等于特征层像素数
框体生成围绕中心点
Bbox的坐标是要归一化到0~1之间的，都是相对于输入图片的大小。
基本生成方式：
H乘np.sqrt(anchor_ratio)
W乘np.sqrt(anchor_ratio)
这样，H:W = ratio
Mask rcnn
self.config.BACKBONE_STRIDES = [4, 8, 16, 32, 64]
# 特征层的下采样倍数，中心点计算使用
self.config.RPN_ANCHOR_RATIOS = [0.5, 1, 2] # 特征层锚框生成参数
self.config.RPN_ANCHOR_SCALES = [32, 64, 128, 256, 512] # 特征层锚框感

anchor生成：

锚框生成入口函数位于model.py中的get_anchor函数，需要参数image_shape，保证含有[h, w]即可，也可以包含[h, w, c]，

 1 def get_anchors(self, image_shape):
 2     """Returns anchor pyramid for the given image size."""
 3     # [N, (height, width)]
 4     backbone_shapes = compute_backbone_shapes(self.config, image_shape)
 5     # Cache anchors and reuse if image shape is the same
 6     if not hasattr(self, "_anchor_cache"):
 7         self._anchor_cache = {}
 8     if not tuple(image_shape) in self._anchor_cache:
 9         # Generate Anchors: [anchor_count, (y1, x1, y2, x2)]
10         a = utils.generate_pyramid_anchors(
11             self.config.RPN_ANCHOR_SCALES,  # (32, 64, 128, 256, 512)
12             self.config.RPN_ANCHOR_RATIOS,  # [0.5, 1, 2]
13             backbone_shapes,                # with shape [N, (height, width)]
14             self.config.BACKBONE_STRIDES,   # [4, 8, 16, 32, 64]
15             self.config.RPN_ANCHOR_STRIDE)  # 1
16         # Keep a copy of the latest anchors in pixel coordinates because
17         # it's used in inspect_model notebooks.
18         # TODO: Remove this after the notebook are refactored to not use it
19         self.anchors = a
20         # Normalize coordinates
21         self._anchor_cache[tuple(image_shape)] = utils.norm_boxes(a, image_shape[:2])
22     return self._anchor_cache[tuple(image_shape)]

调用函数compute_backbone_shapes计算各个特征层shape：

def compute_backbone_shapes(config, image_shape):
    """Computes the width and height of each stage of the backbone network.
 
    Returns:
        [N, (height, width)]. Where N is the number of stages
    """
    if callable(config.BACKBONE):
        return config.COMPUTE_BACKBONE_SHAPE(image_shape)
 
    # Currently supports ResNet only
    assert config.BACKBONE in ["resnet50", "resnet101"]
    return np.array(
        [[int(math.ceil(image_shape[0] / stride)),
            int(math.ceil(image_shape[1] / stride))]
            for stride in config.BACKBONE_STRIDES])  # [4, 8, 16, 32, 64]

调用函数utils.generate_pyramid_anchors生成全部锚框：

def generate_pyramid_anchors(scales, ratios, feature_shapes, feature_strides,
                             anchor_stride):
    """Generate anchors at different levels of a feature pyramid. Each scale
    is associated with a level of the pyramid, but each ratio is used in
    all levels of the pyramid.
 
    Returns:
    anchors: [N, (y1, x1, y2, x2)]. All generated anchors in one array. Sorted
        with the same order of the given scales. So, anchors of scale[0] come
        first, then anchors of scale[1], and so on.
    """
    # Anchors
    # [anchor_count, (y1, x1, y2, x2)]
    anchors = []
    for i in range(len(scales)):
        anchors.append(generate_anchors(scales[i],
                                        ratios,
                                        feature_shapes[i],
                                        feature_strides[i],
                                        anchor_stride))
    # [anchor_count, (y1, x1, y2, x2)]
    return np.concatenate(anchors, axis=0)

utils.generate_pyramid_anchors会调用utils.generate_anchors来生成每一层的锚框（介绍见『Numpy』np.meshgrid）：

def generate_anchors(scales, ratios, shape, feature_stride, anchor_stride):
    """
    scales: 1D array of anchor sizes in pixels. Example: [32, 64, 128]
    ratios: 1D array of anchor ratios of width/height. Example: [0.5, 1, 2]
    shape: [height, width] spatial shape of the feature map over which
            to generate anchors.
    feature_stride: Stride of the feature map relative to the image in pixels.
    anchor_stride: Stride of anchors on the feature map. For example, if the
        value is 2 then generate anchors for every other feature map pixel.
    """
    # Get all combinations of scales and ratios
    scales, ratios = np.meshgrid(np.array(scales), np.array(ratios))
    scales = scales.flatten()
    ratios = ratios.flatten()
 
    # Enumerate heights and widths from scales and ratios
    heights = scales / np.sqrt(ratios)
    widths = scales * np.sqrt(ratios)
 
    # Enumerate shifts in feature space
    shifts_y = np.arange(0, shape[0], anchor_stride) * feature_stride
    shifts_x = np.arange(0, shape[1], anchor_stride) * feature_stride
    shifts_x, shifts_y = np.meshgrid(shifts_x, shifts_y)
 
    # Enumerate combinations of shifts, widths, and heights
    box_widths, box_centers_x = np.meshgrid(widths, shifts_x)    # (n, 3) (n, 3)
    box_heights, box_centers_y = np.meshgrid(heights, shifts_y)  # (n, 3) (n, 3)
 
    # Reshape to get a list of (y, x) and a list of (h, w)
    # (n, 3, 2) -> (3n, 2)
    box_centers = np.stack([box_centers_y, box_centers_x], axis=2).reshape([-1, 2])
　　#box_centers_y, box_centers_x都是坐标矩阵，要想恢复各个点的坐标，调用np.stack函数，指定axis

box_sizes = np.stack([box_heights, box_widths], axis=2).reshape([-1, 2]) # Convert to corner coordinates (y1, x1, y2, x2) boxes = np.concatenate([box_centers - 0.5 * box_sizes, box_centers + 0.5 * box_sizes], axis=1) # 框体信息是相对于原图的, [N, (y1, x1, y2, x2)] return boxes

boxes的长宽：

self.config.RPN_ANCHOR_RATIOS = [0.5, 1, 2] # 特征层锚框生成参数
self.config.RPN_ANCHOR_SCALES = [32, 64, 128, 256, 512] # 特征层锚框感

最小的框：

heights: 32/sqrt(0.5) = 45.25     width: 32 * sqrt(0.5) = 22.62

height:  32/sqrt(1) = 32         width:32* sqrt(1) = 32

最大的框：

heights: 512/sqrt(2) = 362  widths:  512*sqrt(2) = 724

 

最后回到get_anchor，调用utils.norm_boxes将锚框坐标化为01之间：

def norm_boxes(boxes, shape):
    """Converts boxes from pixel coordinates to normalized coordinates.
    boxes: [N, (y1, x1, y2, x2)] in pixel coordinates
    shape: [..., (height, width)] in pixels
 
    Note: In pixel coordinates (y2, x2) is outside the box. But in normalized
    coordinates it's inside the box.
 
    Returns:
        [N, (y1, x1, y2, x2)] in normalized coordinates
    """
    h, w = shape
    scale = np.array([h - 1, w - 1, h - 1, w - 1])
    shift = np.array([0, 0, 1, 1])
    return np.divide((boxes - shift), scale).astype(np.float32)

 

抄自：https://www.cnblogs.com/hellcat/p/9854736.html

转载于:https://www.cnblogs.com/lucky466/p/10252046.html