centos7开启tcp6_【linux】Centos7在55环境下总是监听tcp6/udp6，导致无法使用

版权声明：本文为博主原创文章，遵循 CC 4.0 by-sa 版权协议，转载请附上原文出处链接和本声明。

本文链接：https://blog.csdn.net/wbdxz/article/details/79597020

1.CentOS官方的Wiki提供了在7上关闭IPv6的方法。英文如下

How do I disable IPv6?

Upstream employee Daniel Walsh recommends not disabling the ipv6 module, as that can cause issues with SELinux and other components, but adding the following to /etc/sysctl.conf:

net.ipv6.conf.all.disable_ipv6 = 1

net.ipv6.conf.default.disable_ipv6 = 1

To disable in the running system:

echo 1 > /proc/sys/net/ipv6/conf/all/disable_ipv6

echo 1 > /proc/sys/net/ipv6/conf/default/disable_ipv6

or

sysctl -w net.ipv6.conf.all.disable_ipv6=1

sysctl -w net.ipv6.conf.default.disable_ipv6=1

Additional note #1: If problems with X forwarding are encountered on systems with IPv6 disabled, edit /etc/ssh/sshd_config and make either of the following changes:

参考资料：http://blog.csdn.net/skykingf/article/details/41957147

2.在IPv4下ss同时监听IPv4和IPv6后无法使用

方法：修改config

删去"server":["[::0]"]

如果vps只有ipv4地址的话配置文件里同时监听ipv4和ipv6会出错，只能改成"server":"0.0.0.0"才行

————————————————

版权声明：本文为CSDN博主「SeniorZ」的原创文章，遵循CC 4.0 by-sa版权协议，转载请附上原文出处链接及本声明。

原文链接：https://blog.csdn.net/wbdxz/article/details/79597020