linux 编译内核驱动,内核与驱动编译方法

驱动编译有两种方法：

1. 编译到内核中

2. 编译为独立模块

建立方法：

1) 在linux源码树的驱动目录增加自己的驱动目录，比如：现在新增一个网络设备驱动

mkdir linux_tree/drivers/net/poker_driver -p

cd linux_tree/drivers/net/poker_driver

2) 编写驱动源码

vi  poker_drv_part1.c

vi  poker_drv_part2.c

vi  poker_drv_part3.c

3) 编写源码目录Kconfig

vi Kconfig

config POKER_DRV

tristate "poker_driver support"

default n

---help---

If you say Y here, the kernel will support poker_driver.

If you say M here, the kernel not support poker_driver, must perform "insmod poker_driver.ko".

If you say N here, the kernel not support poker_driver.

4) 编写源码目录Makefile

vi Makefile

obj-$(CONFIG_POKER_DRV) += poker_drv.o

poker_drv-objs += poker_drv_part1.o poker_drv_part2.o poker_drv_part3.o

5) 修改上级Kconfig

vi linux_tree/drivers/net/Kconfig

source "drivers/net/poker_driver/Kconfig"

6) 修改上级Makefile

vi linux_tree/drivers/net/Makefile

obj-$(CONFIG_POKER_DRV) += poker_driver/

7) 配置内核

make menuconfig

Device Drivers  --->

[*] Network device support  --->

<>poker_driver support

1. 编译到内核中：

poker_driver support

linux_tree# make uImage

2. 编译为独立模块

poker_driver support

linux_tree# make modules

括号问题：

[]   可选项 * 空

<> 可选项 * M 空