基于多模态数据挖掘算法matlab,萤火虫算法及其应用研究Matlab.doc

摘 要

萤火虫算法(Firefly Algorithm,FA)是受自然界中的萤火虫通过荧光进行信息交流这种群体行为的启发演变而来。它是由剑桥大学的Xin-She Yang教授在2009年提出的,它作为一种新颖的仿生群智能优化算法,有较大的研究空间。近几十年来随着越来越多的仿生群智能算法的提出,人们对于这些算法的认识和研究也逐步加深。

本文先介绍群智能优化算法的理论概念,然后着重通过对萤火虫算法仿生原理的了解,从数学的角度对萤火虫算法进行合理的描述和过程的定义,最后编写该算法的matlab代码实现对3个峰值函数进行仿真测试,得出其测试结果。同时用遗传算法对同样的测试函数也进行仿真测试,得出其测试结果。最后通过测试结果比较萤火虫算法和遗传算法分别在对峰值函数寻优结果的精确度。在比较过程中,可以根据测试结果发现,萤火虫算法在对峰值函数的寻优结果的精确度优于遗传算法。这表明了萤火虫算法在连续空间优化的可行性和有效性,同时也表明了萤火虫算法具有良好的应用前景。

关键词: 萤火虫算法,仿生群智能优化算法,优化分析,遗传算法

ABSTRACT

The Firefly Algorithm (FA) is affected by the nature of the Firefly exchange of information through a fluorescence inspired this kind of crowd behavior has evolved. It is made by Xin - She Yang professor at the university of Cambridge in 2009, as a novel bionic swarm intelligent optimization algorithm, has a large research space. In recent decades as more bionic swarm intelligent algorithm is put forward, people also gradually deepen to the understanding and research of those algorithms.

First,it is introduced in this paper theoretical concepts of swarm intelligence optimization algorithm, and then emphatically through the understanding of firefly algorithm bionic principle, from the perspective of mathematical descriptions of firefly algorithm is reasonable and the definition of the process, finally ,writes matlab code of the algorithm to realize the three peak function simulation test, to test results. At the same time with the genetic algorithm on the same test function, simulation test, to test results. Finally by comparing test results of firefly algorithm and genetic algorithm in the accuracy of the optimization results of peak function respectively. In the process of comparison, according to the result of test, it can shows that the firefly algorithm on the accuracy of the optimization results of peak function is superior to genetic algorithm. It shows that the feasibility and effectiveness of firefly algorithm in the continuous space optimization, but also shows that the firefly

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
以下是一份简单的经验模态分解(Empirical Mode Decomposition,EMD)的MATLAB代码: ```matlab function [IMF,residual] = emd(x) % EMD - Empirical Mode Decomposition % USAGE: [IMF,residual] = emd(x) % % INPUT: % x - input signal (must be a column vector) % % OUTPUT: % IMF - matrix of intrinsic mode functions (each as a row) % residual - residual signal % % Reference: Huang et al., "The empirical mode decomposition and the % Hilbert spectrum for nonlinear and non-stationary time series analysis," % Proc. R. Soc. Lond. A, Vol. 454, pp. 903-995, 1998. % Set stopping criterion epsilon = 0.1; % Initialize variables t = 0; IMF = []; h = x; % Loop until stopping criterion is satisfied while (sum(abs(h)) > epsilon) t = t + 1; % Find local extrema maxs = find((h(2:end-1) > h(1:end-2)) & (h(2:end-1) > h(3:end))) + 1; mins = find((h(2:end-1) < h(1:end-2)) & (h(2:end-1) < h(3:end))) + 1; % If there are no extrema, just set the residual to be the input if isempty(maxs) || isempty(mins) residual = h; break; end % Make sure maxs and mins start with a max and min respectively if maxs(1) < mins(1) maxs = [1; maxs]; end if mins(1) < maxs(1) mins = [1; mins]; end % Make sure maxs and mins end with a max and min respectively if maxs(end) < mins(end) mins = [mins; length(h)]; end if mins(end) < maxs(end) maxs = [maxs; length(h)]; end % Make the envelopes upper = spline(maxs,h(maxs),1:length(h)); lower = spline(mins,h(mins),1:length(h)); % Find the average envelope mean_env = (upper + lower) / 2; % Extract the IMF IMF(t,:) = h - mean_env; % Update the signal for the next iteration h = mean_env; end % Set the residual residual = x - sum(IMF); end ``` 这个代码实现了EMD的基本过程,将输入信号分解成一组基本模态函数(IMF),并返回剩余信号(residual)。需要注意的是,EMD是一种迭代算法,停止准则(上述代码为epsilon)的选择会影响分解结果的质量。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值