hca卡 linux 查看_ifconfig 命令显示HCA卡IP地址的问题

[root@rac1 ~]# ifconfig -a

enp3s0f0: flags=4163 mtu 1500

inet 192.168.100.101 netmask 255.255.255.0 broadcast 192.168.100.255

inet6 fe80::ec4:7aff:feac:3cc8 prefixlen 64 scopeid 0x20

ether 0c:c4:7a:ac:3c:c8 txqueuelen 1000 (Ethernet)

RX packets 1708659 bytes 1055516580 (1006.6 MiB)

RX errors 0 dropped 1856 overruns 0 frame 0

TX packets 783834 bytes 183429513 (174.9 MiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device memory 0xc7620000-c7640000

enp3s0f0:1: flags=4163 mtu 1500

inet 192.168.100.107 netmask 255.255.255.0 broadcast 192.168.100.255

ether 0c:c4:7a:ac:3c:c8 txqueuelen 1000 (Ethernet)

device memory 0xc7620000-c7640000

enp3s0f1: flags=4098 mtu 1500

ether 0c:c4:7a:ac:3c:c9 txqueuelen 1000 (Ethernet)

RX packets 0 bytes 0 (0.0 B)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 0 bytes 0 (0.0 B)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

device memory 0xc7600000-c7620000

ib0: flags=4163 mtu 2044

inet 10.10.10.101 netmask 255.255.255.0 broadcast 10.10.10.255

inet6 fe80::7efe:9003:91:7ed1 prefixlen 64 scopeid 0x20

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!!!

infiniband 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 txqueuelen 256 (InfiniBand)

RX packets 152742 bytes 16275415 (15.5 MiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 197013 bytes 15793636 (15.0 MiB)

TX errors 0 dropped 11 overruns 0 carrier 0 collisions 0

ib1: flags=4163 mtu 2044

inet 1.1.1.101 netmask 255.255.255.0 broadcast 1.1.1.255

inet6 fe80::7efe:9003:91:7ed2 prefixlen 64 scopeid 0x20

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!!!

infiniband 80:00:00:49:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 txqueuelen 256 (InfiniBand)

RX packets 28753040 bytes 27216942068 (25.3 GiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 25737856 bytes 21898064798 (20.3 GiB)

TX errors 0 dropped 13 overruns 0 carrier 0 collisions 0

ib1:1: flags=4163 mtu 2044

inet 169.254.85.174 netmask 255.255.0.0 broadcast 169.254.255.255

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!!!

infiniband 80:00:00:49:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00 txqueuelen 256 (InfiniBand)

lo: flags=73 mtu 65536

inet 127.0.0.1 netmask 255.0.0.0

inet6 ::1 prefixlen 128 scopeid 0x10

loop txqueuelen 0 (Local Loopback)

RX packets 3296963 bytes 3310546982 (3.0 GiB)

RX errors 0 dropped 0 overruns 0 frame 0

TX packets 3296963 bytes 3310546982 (3.0 GiB)

TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

[root@rac1 ~]#后来查了查mellanox官网的文章:

https://community.mellanox.com/thread/1557

原来需要用ip addr show命令来显示HCA的IP地址,如下:

[root@rac1 ~]# ip addr show

1: lo: mtu 65536 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: enp3s0f0: mtu 1500 qdisc mq state UP qlen 1000

link/ether 0c:c4:7a:ac:3c:c8 brd ff:ff:ff:ff:ff:ff

inet 192.168.100.101/24 brd 192.168.100.255 scope global enp3s0f0

valid_lft forever preferred_lft forever

inet 192.168.100.107/24 brd 192.168.100.255 scope global secondary enp3s0f0:1

valid_lft forever preferred_lft forever

inet6 fe80::ec4:7aff:feac:3cc8/64 scope link

valid_lft forever preferred_lft forever

3: enp3s0f1: mtu 1500 qdisc noop state DOWN qlen 1000

link/ether 0c:c4:7a:ac:3c:c9 brd ff:ff:ff:ff:ff:ff

4: ib0: mtu 2044 qdisc pfifo_fast state UP qlen 256

link/infiniband 80:00:00:48:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:91:7e:d1 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff

inet 10.10.10.101/24 brd 10.10.10.255 scope global ib0

valid_lft forever preferred_lft forever

inet6 fe80::7efe:9003:91:7ed1/64 scope link

valid_lft forever preferred_lft forever

5: ib1: mtu 2044 qdisc pfifo_fast state UP qlen 256

link/infiniband 80:00:00:49:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:91:7e:d2 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff

inet 1.1.1.101/24 brd 1.1.1.255 scope global ib1

valid_lft forever preferred_lft forever

inet 169.254.85.174/16 brd 169.254.255.255 scope global ib1:1

valid_lft forever preferred_lft forever

inet6 fe80::7efe:9003:91:7ed2/64 scope link

valid_lft forever preferred_lft forever

[root@rac1 ~]#

原因是:

ifconfig is obsolete according to Red Hat, also it shows the followng message when running it when IPoIB interfaces exists:

Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes.

Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly.

Ifconfig is obsolete! For replacement check ip.