matlab画圆柱体,Matlab中如何实现绘制任意圆柱

本代码实现了,由两点和半径绘制空间任意圆柱

function [Cylinder EndPlate1 EndPlate2] = cylinder3(X1,X2,r,n,cyl_color,closed,lines)

%

% This function constructs a cylinder connecting two center points

%

% Usage :

% [Cylinder EndPlate1 EndPlate2] = cylinder3(X1+20,X2,r,n,'r',closed,lines)

%

% Cylinder-------Handle of the cylinder

% EndPlate1------Handle of the Starting End plate

% EndPlate2------Handle of the Ending End plate

% X1 and X2 are the 3x1 vectors of the two points

% r is the radius of the cylinder

% n is the no. of elements on the cylinder circumference (more--> refined)

% cyl_color is the color definition like 'r','b',[0.52 0.52 0.52]

% closed=1 for closed cylinder or 0 for hollow open cylinder

% lines=1 for displaying the line segments on the cylinder 0 for only

  • 1
    点赞
  • 4
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
要使用Matlab绘制圆柱体,可以使用以下步骤: 1. 首先,定义圆柱体的参数,如半径和高度。 ```matlab radius = 2; % 圆柱体半径 height = 5; % 圆柱体高度 ``` 2. 创建圆柱体的侧面曲线。可以使用`linspace`函数生成一系列角度,并使用半径和角度计算x和y坐标。 ```matlab theta = linspace(0, 2*pi, 100); % 生成0到2*pi之间的100个角度 x = radius * cos(theta); % 计算x坐标 y = radius * sin(theta); % 计算y坐标 ``` 3. 创建圆柱体的侧面曲线。使用`meshgrid`函数创建网格,并使用半径和高度计算x、y和z坐标。 ```matlab [z, r] = meshgrid(linspace(0, height, 50), linspace(0, radius, 50)); % 创建网格 x = r .* cos(theta); % 计算x坐标 y = r .* sin(theta); % 计算y坐标 ``` 4. 绘制圆柱体的侧面。使用`surf`函数绘制曲面,并设置透明度以显示曲面的内部。 ```matlab surf(x, y, z, 'FaceAlpha', 0.5); % 绘制圆柱体侧面 hold on; ``` 5. 绘制圆柱体的顶面和底面。使用`fill`函数绘制填充的多边形来表示圆柱体的顶面和底面。 ```matlab fill(x(1,:), y(1,:), 'r'); % 绘制顶面 fill(x(end,:), y(end,:), 'r'); % 绘制底面 ``` 6. 设置绘图参数,如坐标轴范围和标签。 ```matlab axis equal; % 设置坐标轴刻度相等 xlabel('X'); ylabel('Y'); zlabel('Z'); % 设置坐标轴标签 ``` 完整的代码如下所示: ```matlab radius = 2; % 圆柱体半径 height = 5; % 圆柱体高度 theta = linspace(0, 2*pi,100); % 生成0到2*pi之间的100个角度 x = radius * cos(theta); % 计算x坐标 y = radius * sin(theta); % 计算y坐标 [z, r] = meshgrid(linspace(0, height, 50), linspace(0, radius, 50)); % 创建网格 x = r .* cos(theta); % 计算x坐标 y = r .* sin(theta); % 计算y坐标 surf(x, y, z, 'FaceAlpha', 0.5); % 绘制圆柱体侧面 hold on; fill(x(1,:), y(1,:), 'r'); % 绘制顶面 fill(x(end,:), y(end,:), 'r'); % 绘制底面 axis equal; % 设置坐标轴刻度相等 xlabel('X'); ylabel('Y'); zlabel('Z'); % 设置坐标轴标签 ``` 运行以上代码,即可在Matlab绘制一个圆柱体

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值