max485全双工原理图_MAX3485工作原理详解（MAX3485引脚图_内部结构_典型应用电路）...

最新推荐文章于 2025-02-08 18:31:19 发布

weixin_39578197

最新推荐文章于 2025-02-08 18:31:19 发布

阅读量4k

点赞数

文章标签： max485全双工原理图

本文链接：https://blog.csdn.net/weixin_39578197/article/details/111523090

版权

MAX3485是一款3.3V低功耗RS-485收发器，适用于半双工通信，最大传输速率为10Mbps。其限摆率驱动器减少EMI，接收器具有失效保护功能，确保数据准确传输。引脚DE和RO用于控制通信方向，常通过单个IO口控制。常见应用电路包括与UART接口的连接，使用1K电阻进行电平转换。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

The MAX3483，MAX3485， MAX3486， MAX3488，MAX3490， and MAX3491 are 3.3V， low-power transceivers for RS-485 and RS-422 communicaTIon. Eachpart contains one driver and one receiver. TheMAX3483 and MAX3488 feature slew-rate-limited drivers that minimize EMI and reduce reflecTIons causedby improperly terminated cables， allowing error-freedata transmission at data rates up to 250kbps. The parTIally slew-rate-limited MAX3486 transmits up to2.5Mbps. The MAX3485， MAX3490， and MAX3491transmit at up to 10Mbps.

Drivers are short-circuit current limited and are protected against excessive power dissipaTIon by thermalshutdown circuitry that places the driver outputs into ahigh-impedance state. The receiver input has a fail-safefeature that guarantees a logic-high output if bothinputs are open circuit.

The MAX3488， MAX3490， and MAX3491 feature fullduplex communication，

最低0.47元/天解锁文章