petalinux 命令

#source settings.sh
#source components/yocto/source/aarch64/environment-setup-aarch64-xilinx-linux
#source components/yocto/source/aarch64/layers/core/oe-init-build-env
#export PATH=/home/work/petalinux/tools/hsm/bin:$PATH
#bitbake fsbl -c cleansstate
#bitbake fsbl
ZYNQMP_CONSOLE=cadence1
$cat QSPI_R5_0.bif
the_ROM_image:
{
[fsbl_config] r5_single
[bootloader] R5_FSBL.elf
[destination_cpu=r5-0] R5_core0_hello_world.elf
}
$ bootgen -r -w –image ./QSPI_R5_0.bif -o Boot.bin
$ cat SD.bif
the_ROM_image:
{
[fsbl_config] a5x_x64
[bootloader] ron_a53_fsbl.elf
[destination_cpu=a5x-0] A53_core0_hello_world.elf
}
$ bootgen -r -w -image SD.bif -o Boot.bin
UltraZed IO Carrier Card
#/etc/init.d/openbsd-inetd restart
petalinux的一些命令：
消除编译时的警告信息：
# petalinux-util --webtalk off
创建新工程：
#petalinux-create --type project --template zynqMP --name /home/work/tp0805
bsp创建工程
#petalinux-create -t project -s <path-to-bsp>
配置命令：
#petalinux-config --get-hw-description=/home/work/tp0805/hdf
#petalinux-config --get-hw-description=/home/ucas/yinhonggen/hdf
清理：
#petalinux-build -x distclean
#petalinux-build -x mrproper  /*清理的最彻底，包括build, image文件夹都将被清理掉*/
打包BOOT的命令：
#petalinux-package --force --boot --fsbl zynqmp_fsbl.elf --fpga design_1_wrapper.bit --pmufw pmufw.elf --atf bl31.elf --uboot
#petalinux-package --boot --fpga system.bit --u-boot --kernel
#petalinux-package --boot --fpga system.bit --u-boot
#petalinux-package --boot --fpga system.bit --u-boot --add system.dtb --offset 0x01440000 --kernel --add rootfs.jffs2 --offset 0x02460000  --force
#petalinux-build -s
#petalinux-package --sysroot
petalinux-build -x package  //To regenerate the image.ub, Image and rootfs.cpio.gz
petalinux-build -c device-tree -x mrproper
petalinux-build -c device-tree
petalinux-build -c arm-trusted-firmware
petalinux-build -c bootloader
petalinux-build -c kernel
petalinux-build -c u-boot
petalinux-build -c device-tree -x mrproper
First create the application
$ petalinux-create -t apps -n myapp --enable
petalinux-build -c rootfs
petalinux-create -t apps --template install --name myapp --enable
Rebuild PetaLinux project for the Linux application
You can rebuild the whole project,rootfs or just the application
$ petalinux-build
$ petalinux-build -c rootfs
$ petalinux-build -c rootfs/myapp
To add Linux user libraries to your rootfs.
$ petalinux-create -t libs -n mylib --enable
The above command will create a Linux user library "mylib" in "components/libs/mylib"
$ petalinux-build -c rootfs/mylib
PetaLinux uses library priorities to decide the compilation sequence of the user libraries.
To specify the priority of you library
$ petalinux-create -t libs -n mylib --enable --priority X
X is the priority of your library."1" has the highest priority which will be built first.
Please find the available priorities from with the "--help" of "petalinux-create -t libs".
#zcat rootfs.cpio.gz | cpio -idmv 
#zcat rootfs.cpio.gz | fakeroot cpio -idmv 
#cpio -idmv < rootfs.cpio 
#find ./* | cpio -H newc -o > rootfs.cpio （或者 find ./* | cpio -H tar -o > rootfs.cpio）
#gzip rootfs.cpio
System Configuration/Yocto Settings中，Add pre-mirror url、Local sstate feeds settings设置为本地地址，格式如下：
Add pre-mirror url：
file:///petalinux/sstate-rel-v2018.2/downloads
Local sstate feeds settings：
/petalinux/sstate-rel-v2018.2/aarch64
本地资源为sstate-rel-v2018.2文件夹。