本帖最后由 sync 于 2019-1-30 10:00 编辑
这次只开机，只有默认线程，thread pri status sp stack size max used left tick error
-------- --- ------- ---------- ---------- ------ ---------- ---
tshell 20 running 0x00000084 0x00001000 12% 0x00000008 000
phy 30 suspend 0x00000094 0x00000400 21% 0x00000001 000
tcpip 10 suspend 0x000000c4 0x00000400 59% 0x00000001 000
etx 12 suspend 0x00000098 0x00000400 23% 0x0000000c 000
erx 12 suspend 0x00000098 0x00000400 56% 0x00000005 000
tidle0 31 ready 0x00000058 0x00000100 34% 0x00000012 000
main 10 suspend 0x00000094 0x00000800 34% 0x00000011 000
的情况下就会出现错误：receive frame faild
使用的是8720接口芯片
\ | /
- RT - Thread Operating System
/ | \ 4.0.0 build Jan 29 2019
2006 - 2018 Copyright by rt-thread team
lwIP-2.0.2 initialized!
[D/drv.emac] initialize tx wait semaphore
netif: IP address of interface e0 set to 0.0.0.0
netif: netmask of interface e0 set to 0.0.0.0
netif: GW address of interface e0 set to 0.0.0.0
[D/drv.emac] eth hardware init success
[D/drv.emac] emac hardware start
netif: setting default interface e0
[D/drv.emac] transmit frame lenth :350
netif: added interface e0 IP addr 0.0.0.0 netmask 0.0.0.0 gw 0.0.0.0
[D/drv.emac] emac device init success
msh >[D/drv.emac] found a phy, addre
最低0.47元/天 解锁文章
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
