RT-Thread 使用CmBacktrace解决在freemodbus调用easyflash卡死的问题

根据项目需求，改写了eMBRegHoldingCB函数，在其中调用了easyflash的ef_get_env_blob函数，程序卡死，打印信息如下：

thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---

开启了CmBacktrace组件，使用除0错误验证，组件工作正常。

thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
md_s_sen  31  suspend 0x000000c0 0x00000200    37%   0x0000000a 000
slave tr  10  suspend 0x000000b8 0x00000200    35%   0x00000005 000
md_s_pol  10  suspend 0x000000e0 0x00000200    69%   0x0000000a 000
tshell    20  suspend 0x00000188 0x00001000    09%   0x0000000a 000
sys_work  23  suspend 0x00000088 0x00000800    06%   0x0000000a 000
mmcsd_de  22  suspend 0x000000b8 0x00000400    62%   0x00000007 000
tidle0    31  ready   0x00000084 0x00000100    57%   0x0000001d 000
timer      4  suspend 0x0000007c 0x00000200    24%   0x00000009 000
main      10  running 0x00000154 0x00000800    44%   0x0000000c 000

Firmware name: CmBacktrace, hardware version: V1.0.0, software version: V0.1.0
Fault on thread main
===== Thread stack information =====
  addr: 20004af0    data: 0000001e
  addr: 20004af4    data: 00000014
  addr: 20004af8    data: 00000000
  addr: 20004afc    data: 0000000a
  addr: 20004b00    data: e000ed14
  addr: 20004b04    data: 00000002
  addr: 20004b08    data: 20004b10
  addr: 20004b0c    data: 08001781
  addr: 20004b10    data: 00000000
  addr: 20004b14    data: 00000000
  addr: 20004b18    data: deadbeef
  addr: 20004b1c    data: 08005419
====================================
=================== Registers information ====================
  R0 : 00000000  R1 : 10000000  R2 : 0000000a  R3 : 00000000
  R12: ffffffff  LR : 08005185  PC : 0803587a  PSR: 41010000
==============================================================
Usage fault is caused by Indicates a divide by zero has taken place (can be set only if DIV_0_TRP is set)
Show more call stack info by run: addr2line -e CmBacktrace.elf -a -f 0803587a 08005184 08001780 
Current system tick: 2309

再次触发eMBRegHoldingCB，看到如下信息：

thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
md_s_sen  31  suspend 0x000000c0 0x00000200    37%   0x00000015 000
slave tr  10  suspend 0x000000b8 0x00000200    35%   0x00000005 000

Firmware name: CmBacktrace, hardware version: V1.0.0, software version: V0.1.0
Fault on thread 
Error: Thread stack(00000028) was overflow
===== Thread stack information =====
====================================
Usage fault is caused by attempts to switch to an invalid state (e.g., ARM)
Dump call stack has an error
Current system tick: 14120

虽然打印的线程信息不完全，但这里已经有提示stack(00000028) was overflow，增加mb_slave_poll 线程的栈空间后，工作正常。

这里线程信息打印不完全也可能是因为栈溢出导致了数据错误，没办法现实完整的信息。
附带在mb_slave_poll调用ef_get_env_blob前后的stack size最大使用量：

thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
md_s_sen  31  suspend 0x000000c0 0x00000200    37%   0x00000015 000
slave tr  10  suspend 0x000000b8 0x00000200    35%   0x00000005 000
md_s_pol  10  suspend 0x000000e0 0x00001000    08%   0x00000015 000
tshell    20  running 0x00000188 0x00001000    15%   0x00000003 000
sys_work  23  suspend 0x00000088 0x00000800    06%   0x0000000a 000
mmcsd_de  22  suspend 0x000000b8 0x00000400    62%   0x00000007 000
tidle0    31  ready   0x0000005c 0x00000100    57%   0x0000000c 000
timer      4  suspend 0x0000007c 0x00000200    24%   0x00000009 000
main      10  suspend 0x00000144 0x00000800    46%   0x00000003 000
msh />[D/mb.app] haha
ps
thread   pri  status      sp     stack size max used left tick  error
-------- ---  ------- ---------- ----------  ------  ---------- ---
md_s_sen  31  suspend 0x000000c0 0x00000200    37%   0x00000015 000
slave tr  10  suspend 0x000000b8 0x00000200    39%   0x00000003 000
md_s_pol  10  suspend 0x000000e0 0x00001000    22%   0x0000000c 000
tshell    20  running 0x00000188 0x00001000    15%   0x00000008 000
sys_work  23  suspend 0x00000088 0x00000800    06%   0x0000000a 000
mmcsd_de  22  suspend 0x000000b8 0x00000400    62%   0x00000007 000
tidle0    31  ready   0x0000005c 0x00000100    57%   0x00000017 000
timer      4  suspend 0x0000007c 0x00000200    24%   0x00000009 000
main      10  suspend 0x00000144 0x00000800    46%   0x00000007 000
msh />

从8%提升到了22%，即327Byte提升到了901Byte，之前的512Byte 是远远不够的。