ip冲突 scan windows_Windows下兼容 IPv4IPv6 的扫描软件Scan6源代码

/* scan6 written by Marco Del Percio 09/11/2004 DESCRIPTION: Scan6 is a simple IPv4/IPv6 single host portscanner. It can check for ANY open port on a single IPv4/IPv6 host or you can specify a startport and an endport if you don't want to check all the 65535 ports. Scan6 requires a mandatory option in order to specify if you are going to scan an IPv4 or an IPv6 address. Scan6 is a high-multithreading console application. REQUIRES: This application is designed to work on Windows 2000/XP however it was only tested on Windows XP SP1. To use it with IPv6 addresses you MUST have an IPv6 address (so you should have Microsoft IPv6 Tech. Preview if you are using Windows 2k). To compile this you need: 1)Platform SDK (updated) 2)Microsoft VC++6.0 3)IPv6 installed NOTE: This application was only tested on Windows XP SP1! This application uses a lot of threads if you specify "big" port-range. So checking all 65535 ports will take much time, DO NOT TERMINATE the program ;-P just wait ;) IMPORTANT: If you don't specify startport and endport (65535 ports), I have decided to use 257 threads with every thread checking for 255 ports using a single socket. On the other side, if you specify a startport and an endport (smaller range) I have decided to use X