QCM6490 多次点击power键才能唤醒屏幕

已于 2023-05-22 17:27:40 修改
阅读量1k 收藏 2
点赞数
分类专栏： QCOM6490 文章标签： android 驱动开发 linux
于 2023-05-22 17:24:36 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/weixin_40970718/article/details/126399830
版权

项目场景：

点击2-3次power键才能唤醒屏幕。
1.gpio 占用，目测最有可能的是gpio占用 导致超时 （1.通过添加log定位 2.排查添加的gpio）-排除，没有报错也无法唤醒
2.休眠有问题
3.唤醒有问题
4.pmi休眠唤醒异常导致 --对比另外的项目有同样报错没有问题，排除
5.发现oom (PASR关闭测试)–关闭仍然出现
6.调试DP导致的（fusb302）-- 移除依然出现
7.pci
8.对比代码发现audio有所不一样，移除查看
9.按键上报延时或者没有报上去导致的
要么系统没有被唤醒，要么就是屏幕这块休眠唤醒有问题

[  210.074798][ T5108] PM: PM: Pending Wakeup Sources: [timerfd]
[  210.091733][  T327] pci-msm-rc 0000:00:00.0: Refused to change power state, currently in D3
[  210.093743][ T5108] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[  210.093746][ T5108] spmi spmi-0: failed irqchip transaction on 125
[  210.093771][ T5108] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[  210.093772][ T5108] spmi spmi-0: failed irqchip transaction on 126
[  210.093796][ T5108] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[  210.093797][ T5108] spmi spmi-0: failed irqchip transaction on 127
[  210.098863][ T5240] yjc usb_extcon_detect_cable id=1,vbus=1

原因分析：

1.通过echo 8 > /proc/sysrq-trigger
log发现可能是gpio被占用导致（invalid GPIO -2），经修改，排除gpio导致，没有打印此log依然出现多次点击才能唤醒的现象

[   92.174247][ T5478] msm-dwc3 8c00000.hsusb: DWC3 exited from low power mode
[   92.300439][ T5468] ------------[ cut here ]------------
[   92.300443][ T5468] invalid GPIO -2
[   92.300470][ T5468] WARNING: CPU: 6 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.300472][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.300508][ T5468] CPU: 6 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.300509][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.300511][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.300513][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.300515][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.300516][ T5468] sp : ffffffc02720b950
[   92.300517][ T5468] x29: ffffffc02720b950 x28: 0000000000000000
[   92.300519][ T5468] x27: ffffffdb5daeb860 x26: ffffffdb5d548018
[   92.300521][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.300522][ T5468] x23: 0000000000000002 x22: ffffffdb5cd3347f
[   92.300524][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.300525][ T5468] x19: 00000000fffffffe x18: ffffffc02676d0a0
[   92.300527][ T5468] x17: 00000000fff9bb84 x16: 000000000009bb84
[   92.300528][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.300530][ T5468] x13: 0000000000000008 x12: 00000000039ce8e1
[   92.300531][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.300533][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.300535][ T5468] x7 : 0000000000000000 x6 : ffffffac33d644a0
[   92.300537][ T5468] x5 : 0000000000000000 x4 : 0000000000000004
[   92.300539][ T5468] x3 : ffffffc02720b5f0 x2 : ffffffdb5afb6af0
[   92.300540][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.300542][ T5468] Call trace:
[   92.300544][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.300549][ T5468]  dwc3_msm_pm_suspend+0x6c/0x114
[   92.300552][ T5468]  platform_pm_suspend+0x44/0xd4
[   92.300554][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.300555][ T5468]  __device_suspend+0x3c8/0x6ec
[   92.300556][ T5468]  dpm_suspend+0x1d8/0x600
[   92.300558][ T5468]  dpm_suspend_start+0x84/0x1bc
[   92.300561][ T5468]  suspend_devices_and_enter+0xf4/0x4b4
[   92.300563][ T5468]  enter_state+0x4a0/0x52c
[   92.300565][ T5468]  pm_suspend+0x58/0xc4
[   92.300567][ T5468]  state_store+0x124/0x158
[   92.300571][ T5468]  kobj_attr_store+0x34/0x80
[   92.300575][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.300578][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.300580][ T5468]  __vfs_write+0x60/0x20c
[   92.300582][ T5468]  vfs_write+0xe4/0x1a8
[   92.300583][ T5468]  ksys_write+0x78/0xe4
[   92.300585][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.300587][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.300589][ T5468]  el0_svc_handler+0x74/0x98
[   92.300591][ T5468]  el0_svc+0x8/0xc
[   92.300593][ T5468] ---[ end trace 18b985c593c6cbd9 ]---
[   92.300596][ T5468] ------------[ cut here ]------------
[   92.300599][ T5468] invalid GPIO -2
[   92.300611][ T5468] WARNING: CPU: 6 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.300612][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.300628][ T5468] CPU: 6 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.300629][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.300630][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.300632][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.300633][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.300634][ T5468] sp : ffffffc02720b950
[   92.300635][ T5468] x29: ffffffc02720b950 x28: 0000000000000000
[   92.300637][ T5468] x27: ffffffdb5daeb860 x26: ffffffdb5d548018
[   92.300639][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.300640][ T5468] x23: 0000000000000002 x22: ffffffdb5cd3347f
[   92.300642][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.300643][ T5468] x19: 00000000fffffffe x18: ffffffc02676d0a0
[   92.300645][ T5468] x17: 00000000fff9aecc x16: 000000000009aecc
[   92.300647][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.300649][ T5468] x13: 0000000000000008 x12: 00000000039cf48b
[   92.300651][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.300652][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.300654][ T5468] x7 : 0000000000000000 x6 : ffffffac33d65158
[   92.300656][ T5468] x5 : 0000000000000000 x4 : 000000000000000c
[   92.300657][ T5468] x3 : ffffffc02720b5f0 x2 : ffffffdb5afb6af0
[   92.300659][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.300661][ T5468] Call trace:
[   92.300662][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.300664][ T5468]  dwc3_msm_pm_suspend+0x7c/0x114
[   92.300666][ T5468]  platform_pm_suspend+0x44/0xd4
[   92.300668][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.300669][ T5468]  __device_suspend+0x3c8/0x6ec
[   92.300670][ T5468]  dpm_suspend+0x1d8/0x600
[   92.300671][ T5468]  dpm_suspend_start+0x84/0x1bc
[   92.300674][ T5468]  suspend_devices_and_enter+0xf4/0x4b4
[   92.300676][ T5468]  enter_state+0x4a0/0x52c
[   92.300677][ T5468]  pm_suspend+0x58/0xc4
[   92.300680][ T5468]  state_store+0x124/0x158
[   92.300682][ T5468]  kobj_attr_store+0x34/0x80
[   92.300684][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.300686][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.300688][ T5468]  __vfs_write+0x60/0x20c
[   92.300689][ T5468]  vfs_write+0xe4/0x1a8
[   92.300691][ T5468]  ksys_write+0x78/0xe4
[   92.300693][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.300694][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.300696][ T5468]  el0_svc_handler+0x74/0x98
[   92.300697][ T5468]  el0_svc+0x8/0xc
[   92.300698][ T5468] ---[ end trace 18b985c593c6cbda ]---
[   92.300701][ T5468] ------------[ cut here ]------------
[   92.300703][ T5468] invalid GPIO -2
[   92.300712][ T5468] WARNING: CPU: 6 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.300713][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.300729][ T5468] CPU: 6 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.300730][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.300731][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.300733][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.300734][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.300735][ T5468] sp : ffffffc02720b950
[   92.300736][ T5468] x29: ffffffc02720b950 x28: 0000000000000000
[   92.300738][ T5468] x27: ffffffdb5daeb860 x26: ffffffdb5d548018
[   92.300739][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.300741][ T5468] x23: 0000000000000002 x22: ffffffdb5cd3347f
[   92.300743][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.300744][ T5468] x19: 00000000fffffffe x18: ffffffc02676d0a0
[   92.300746][ T5468] x17: 00000000fff9a214 x16: 000000000009a214
[   92.300748][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.300749][ T5468] x13: 0000000000000008 x12: 00000000039cfc5e
[   92.300751][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.300752][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.300754][ T5468] x7 : 0000000000000000 x6 : ffffffac33d65e10
[   92.300756][ T5468] x5 : 0000000000000000 x4 : 0000000000000004
[   92.300758][ T5468] x3 : ffffffc02720b5f0 x2 : ffffffdb5afb6af0
[   92.300762][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.300764][ T5468] Call trace:
[   92.300765][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.300767][ T5468]  dwc3_msm_pm_suspend+0x8c/0x114
[   92.300769][ T5468]  platform_pm_suspend+0x44/0xd4
[   92.300770][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.300772][ T5468]  __device_suspend+0x3c8/0x6ec
[   92.300773][ T5468]  dpm_suspend+0x1d8/0x600
[   92.300774][ T5468]  dpm_suspend_start+0x84/0x1bc
[   92.300776][ T5468]  suspend_devices_and_enter+0xf4/0x4b4
[   92.300778][ T5468]  enter_state+0x4a0/0x52c
[   92.300780][ T5468]  pm_suspend+0x58/0xc4
[   92.300781][ T5468]  state_store+0x124/0x158
[   92.300784][ T5468]  kobj_attr_store+0x34/0x80
[   92.300786][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.300788][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.300790][ T5468]  __vfs_write+0x60/0x20c
[   92.300791][ T5468]  vfs_write+0xe4/0x1a8
[   92.300793][ T5468]  ksys_write+0x78/0xe4
[   92.300794][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.300796][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.300797][ T5468]  el0_svc_handler+0x74/0x98
[   92.300799][ T5468]  el0_svc+0x8/0xc
[   92.300799][ T5468] ---[ end trace 18b985c593c6cbdb ]---
[   92.301027][ T5468] msm-dwc3 8c00000.hsusb: DWC3 in low power mode
[   92.302925][ T5478] sd 0:0:0:5: [sdf] Synchronizing SCSI cache
[   92.303752][  T346] sd 0:0:0:4: [sde] Synchronizing SCSI cache
[   92.304139][ T5475] sd 0:0:0:3: [sdd] Synchronizing SCSI cache
[   92.304246][ T5474] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
[   92.304475][  T322] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[   92.304688][ T5479] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[   92.444394][ T5478] msm_pcie_disable: PCIe: Assert the reset of endpoint of RC1.
[   92.446201][ T5478] pci-msm-rc 0001:00:00.0: msm_pcie_fixup_suspend+0x0/0x4 took 102043 usecs
[   92.450163][    T0] suspend ns:      92450160853      suspend cycles:       2393430803
[   92.450160][    T0] resume cycles:       2485622962
[   92.451365][ T5468] PM: PM: Pending Wakeup Sources: [timerfd]
[   92.454690][ T5483] msm_pcie_enable: PCIe: Assert the reset of endpoint of RC1.
[   92.460079][ T5483] msm_pcie_enable: PCIe: RC1: PCIE20_PARF_INT_ALL_MASK: 0x7f80c202
[   92.462987][ T5483] pcie_phy_init: PCIe RC1 PHY is ready!
[   92.468935][ T5470] pci-msm-rc 0000:00:00.0: Refused to change power state, currently in D3
[   92.473161][ T5483] msm_pcie_enable: PCIe: Release the reset of endpoint of RC1.
[   92.522119][ T5483] msm_pcie_link_train: PCIe RC1 link initialized
[   92.523441][ T5483] pci-msm-rc 0001:00:00.0: msm_pcie_fixup_resume_early+0x0/0x4 took 67218 usecs
[   92.542995][ T5468] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[   92.543010][ T5468] spmi spmi-0: failed irqchip transaction on 125
[   92.543052][ T5468] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[   92.543061][ T5468] spmi spmi-0: failed irqchip transaction on 126
[   92.543103][ T5468] spmi spmi-0: pmic_arb_wait_for_done: transaction failed (0x3)
[   92.543112][ T5468] spmi spmi-0: failed irqchip transaction on 127
[   92.574275][  T128] yjc usb_extcon_detect_cable id=1,vbus=0
[   92.591585][ T5475] pci-msm-rc 0000:00:00.0: Refused to change power state, currently in D3
[   92.592928][    T7] yjc usb_extcon_detect_cable id=1,vbus=0
[   92.602758][ T5468] ------------[ cut here ]------------
[   92.602777][ T5468] invalid GPIO -2
[   92.602861][ T5468] WARNING: CPU: 3 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.602867][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.603007][ T5468] CPU: 3 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.603013][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.603024][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.603033][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.603042][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.603048][ T5468] sp : ffffffc02720b9b0
[   92.603054][ T5468] x29: ffffffc02720b9b0 x28: 0000000000000000
[   92.603064][ T5468] x27: ffffffac351ca010 x26: ffffffdb5d548018
[   92.603073][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.603083][ T5468] x23: 0000000000000010 x22: ffffffdb5cd3347f
[   92.603093][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.603102][ T5468] x19: 00000000fffffffe x18: ffffffc02676d098
[   92.603112][ T5468] x17: 00000000fff98aec x16: 0000000000098aec
[   92.603122][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.603131][ T5468] x13: 000000000000000a x12: 00000000002cb74a
[   92.603141][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.603150][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.603159][ T5468] x7 : 0000000000000000 x6 : ffffffac33d67538
[   92.603168][ T5468] x5 : 0000000000000000 x4 : 000000000000000c
[   92.603177][ T5468] x3 : ffffffc02720b650 x2 : ffffffdb5afb6af0
[   92.603186][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.603196][ T5468] Call trace:
[   92.603205][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.603221][ T5468]  dwc3_msm_pm_resume+0x6c/0x11c
[   92.603234][ T5468]  platform_pm_resume+0x80/0xbc
[   92.603244][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.603257][ T5468]  device_resume+0x21c/0x238
[   92.603266][ T5468]  dpm_resume+0x200/0x610
[   92.603280][ T5468]  suspend_devices_and_enter+0x1e8/0x4b4
[   92.603290][ T5468]  enter_state+0x4a0/0x52c
[   92.603298][ T5468]  pm_suspend+0x58/0xc4
[   92.603308][ T5468]  state_store+0x124/0x158
[   92.603323][ T5468]  kobj_attr_store+0x34/0x80
[   92.603338][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.603349][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.603360][ T5468]  __vfs_write+0x60/0x20c
[   92.603368][ T5468]  vfs_write+0xe4/0x1a8
[   92.603378][ T5468]  ksys_write+0x78/0xe4
[   92.603386][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.603398][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.603407][ T5468]  el0_svc_handler+0x74/0x98
[   92.603418][ T5468]  el0_svc+0x8/0xc
[   92.603424][ T5468] ---[ end trace 18b985c593c6cbdc ]---
[   92.603441][ T5468] ------------[ cut here ]------------
[   92.603459][ T5468] invalid GPIO -2
[   92.603530][ T5468] WARNING: CPU: 3 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.603534][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.603640][ T5468] CPU: 3 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.603646][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.603653][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.603662][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.603670][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.603675][ T5468] sp : ffffffc02720b9b0
[   92.603681][ T5468] x29: ffffffc02720b9b0 x28: 0000000000000000
[   92.603690][ T5468] x27: ffffffac351ca010 x26: ffffffdb5d548018
[   92.603700][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.603709][ T5468] x23: 0000000000000010 x22: ffffffdb5cd3347f
[   92.603718][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.603728][ T5468] x19: 00000000fffffffe x18: ffffffc02676d098
[   92.603737][ T5468] x17: 00000000fff97e6c x16: 0000000000097e6c
[   92.603747][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.603756][ T5468] x13: 000000000000000a x12: 00000000002cea6c
[   92.603766][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.603775][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.603784][ T5468] x7 : 0000000000000000 x6 : ffffffac33d681b8
[   92.603793][ T5468] x5 : 0000000000000000 x4 : 000000000000000c
[   92.603802][ T5468] x3 : ffffffc02720b650 x2 : ffffffdb5afb6af0
[   92.603811][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.603820][ T5468] Call trace:
[   92.603829][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.603839][ T5468]  dwc3_msm_pm_resume+0x7c/0x11c
[   92.603849][ T5468]  platform_pm_resume+0x80/0xbc
[   92.603857][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.603866][ T5468]  device_resume+0x21c/0x238
[   92.603875][ T5468]  dpm_resume+0x200/0x610
[   92.603885][ T5468]  suspend_devices_and_enter+0x1e8/0x4b4
[   92.603893][ T5468]  enter_state+0x4a0/0x52c
[   92.603902][ T5468]  pm_suspend+0x58/0xc4
[   92.603911][ T5468]  state_store+0x124/0x158
[   92.603921][ T5468]  kobj_attr_store+0x34/0x80
[   92.603932][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.603941][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.603950][ T5468]  __vfs_write+0x60/0x20c
[   92.603958][ T5468]  vfs_write+0xe4/0x1a8
[   92.603966][ T5468]  ksys_write+0x78/0xe4
[   92.603975][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.603983][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.603991][ T5468]  el0_svc_handler+0x74/0x98
[   92.603999][ T5468]  el0_svc+0x8/0xc
[   92.604005][ T5468] ---[ end trace 18b985c593c6cbdd ]---
[   92.604020][ T5468] ------------[ cut here ]------------
[   92.604038][ T5468] invalid GPIO -2
[   92.604108][ T5468] WARNING: CPU: 3 PID: 5468 at drivers/gpio/gpiolib.c:126 gpio_to_desc+0xb0/0xc4
[   92.604112][ T5468] Modules linked in: r8125 rmnet_offload(O) rmnet_shs(O) wlan(O) native_dlkm hdmi_dlkm swr_dmic_dlkm machine_dlkm platform_dlkm wsa_macro_dlkm rx_macro_dlkm hid_aksys wcd938x_dlkm wcd937x_dlkm wsa883x_dlkm tx_macro_dlkm r8168 va_macro_dlkm mbhc_dlkm bt_fm_slim wcd937x_slave_dlkm pinctrl_wcd_dlkm bolero_cdc_dlkm pinctrl_lpi_dlkm wcd9xxx_dlkm swr_ctrl_dlkm wcd938x_slave_dlkm swr_haptics_dlkm qcom_edac adsp_loader_dlkm rdbg stub_dlkm slimbus_ngd btpower slimbus rmnet_core(O) q6_dlkm rmnet_ctl(O) apr_dlkm q6_notifier_dlkm q6_pdr_dlkm snd_event_dlkm swr_dlkm wcd_core_dlkm msm_drm [last unloaded: r8125]
[   92.604216][ T5468] CPU: 3 PID: 5468 Comm: Binder:668_2 Tainted: G S      W  O      5.4.147-qgki-debug #1
[   92.604223][ T5468] Hardware name: Qualcomm Technologies, Inc. YUPIK-IOT QRD (DT)
[   92.604231][ T5468] pstate: 60400005 (nZCv daif +PAN -UAO)
[   92.604239][ T5468] pc : gpio_to_desc+0xb0/0xc4
[   92.604247][ T5468] lr : gpio_to_desc+0xac/0xc4
[   92.604252][ T5468] sp : ffffffc02720b9b0
[   92.604258][ T5468] x29: ffffffc02720b9b0 x28: 0000000000000000
[   92.604269][ T5468] x27: ffffffac351ca010 x26: ffffffdb5d548018
[   92.604279][ T5468] x25: ffffffdb5d9578a0 x24: ffffffdb5dd71000
[   92.604288][ T5468] x23: 0000000000000010 x22: ffffffdb5cd3347f
[   92.604298][ T5468] x21: ffffffac07f04080 x20: ffffffdb5daae310
[   92.604307][ T5468] x19: 00000000fffffffe x18: ffffffc02676d098
[   92.604316][ T5468] x17: 00000000fff971ec x16: 00000000000971ec
[   92.604325][ T5468] x15: ffffffdb5dd712e8 x14: 0000000000000000
[   92.604334][ T5468] x13: 000000000000000a x12: 00000000002d15d6
[   92.604343][ T5468] x11: 0000000000000015 x10: 000000000682aaab
[   92.604353][ T5468] x9 : 907912f647ba6100 x8 : 907912f647ba6100
[   92.604362][ T5468] x7 : 0000000000000000 x6 : ffffffac33d68e38
[   92.604371][ T5468] x5 : 0000000000000000 x4 : 000000000000000c
[   92.604381][ T5468] x3 : ffffffc02720b650 x2 : ffffffdb5afb6af0
[   92.604390][ T5468] x1 : ffffffdb5afb6af0 x0 : 0000000000000000
[   92.604398][ T5468] Call trace:
[   92.604407][ T5468]  gpio_to_desc+0xb0/0xc4
[   92.604418][ T5468]  dwc3_msm_pm_resume+0x8c/0x11c
[   92.604427][ T5468]  platform_pm_resume+0x80/0xbc
[   92.604435][ T5468]  dpm_run_callback+0x2b8/0x424
[   92.604444][ T5468]  device_resume+0x21c/0x238
[   92.604454][ T5468]  dpm_resume+0x200/0x610
[   92.604464][ T5468]  suspend_devices_and_enter+0x1e8/0x4b4
[   92.604473][ T5468]  enter_state+0x4a0/0x52c
[   92.604481][ T5468]  pm_suspend+0x58/0xc4
[   92.604491][ T5468]  state_store+0x124/0x158
[   92.604502][ T5468]  kobj_attr_store+0x34/0x80
[   92.604512][ T5468]  sysfs_kf_write+0x60/0xb8
[   92.604521][ T5468]  kernfs_fop_write+0x124/0x1b8
[   92.604530][ T5468]  __vfs_write+0x60/0x20c
[   92.604539][ T5468]  vfs_write+0xe4/0x1a8
[   92.604547][ T5468]  ksys_write+0x78/0xe4
[   92.604555][ T5468]  __arm64_sys_write+0x1c/0x28
[   92.604563][ T5468]  el0_svc_common+0xcc/0x1d8
[   92.604570][ T5468]  el0_svc_handler+0x74/0x98
[   92.604578][ T5468]  el0_svc+0x8/0xc
[   92.604584][ T5468] ---[ end trace 18b985c593c6cbde ]---
[   92.605103][ T5468] msm-dwc3 8c00000.hsusb: DWC3 exited from low power mode
[   92.688864][  T322] [kworke][0x946d856d][08:15:59.401628] wlan: [322:E:QDF] cds_get_context: Module ID 61 context is Null
[   93.877621][    C2] rimps-log 18509c00.qcom,rimps_log: global buffer full dropping buffers
[   93.882718][ T5468] OOM killer enabled.
[   94.019587][    C2] rimps-log 18509c00.qcom,rimps_log: global buffer full dropping buffers
[   94.025466][ T5468] Restarting tasks ... done.
[   94.045437][  T336] msm-dwc3 a600000.ssusb: Could not get usb psy
[   94.050305][ T5468] Abort: Pending Wakeup Sources: [timerfd]
[   94.050308][ T5468] PM: suspend exit
[   94.114619][  T602] type=1400 audit(1660292160.818:390): avc: denied { read } for comm="Binder:668_2" name="wakeup4" dev="sysfs" ino=54692 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   94.116467][  T673] audit: audit_lost=132 audit_rate_limit=5 audit_backlog_limit=64
[   94.116470][  T673] audit: rate limit exceeded
[   94.156725][    C7] ALERT: changing window size from 16000000 to 20000000 at 94148055171
[   94.187907][ T1055] [drm:sde_rm_reserve] [sde error]poll timeout cur -1 nxt 6 enc 53
[   94.194455][  T602] type=1400 audit(1660292160.822:391): avc: denied { read } for comm="Binder:668_2" name="wakeup28" dev="sysfs" ino=75472 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   94.200963][ T1055] [drm:_sde_encoder_atomic_check_reserve:933] [sde error]enc53 RM failed to reserve resources, rc = -22
[   94.940985][  T602] type=1400 audit(1660292160.822:392): avc: denied { read } for comm="Binder:668_2" name="wakeup18" dev="sysfs" ino=72493 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   94.962030][  T602] type=1400 audit(1660292160.822:393): avc: denied { read } for comm="Binder:668_2" name="wakeup46" dev="sysfs" ino=95114 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   94.982778][  T602] type=1400 audit(1660292160.822:394): avc: denied { read } for comm="Binder:668_2" name="wakeup2" dev="sysfs" ino=54638 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[   95.229606][ T5558] msm-dwc3 8c00000.hsusb: DWC3 in low power mode
[   97.794084][  T486] sd 0:0:0:5: [sdf] Synchronizing SCSI cache
[   97.801324][ T5558] sd 0:0:0:4: [sde] Synchronizing SCSI cache
[   97.809605][  T338] sd 0:0:0:3: [sdd] Synchronizing SCSI cache
[   97.816599][   T62] sd 0:0:0:2: [sdc] Synchronizing SCSI cache
[   97.823343][  T338] sd 0:0:0:1: [sdb] Synchronizing SCSI cache
[   97.830337][   T62] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[  102.123054][  T346] (virq:irq_count)- 3:89090 15:22376 25:14687 10:6950 371:5084 386:1773 227:1641 359:1630 19:1571 20:1410
[  102.134973][  T346] (cpu:irq_count)- 0:57066 1:18479 2:18360 3:27746 4:6860 5:8092 6:8024 7:8300
[  102.144439][  T346] (ipi:irq_count)- 0:148033 1:73687 2:0 3:0 4:0 5:63078 6:0
[  103.098656][  T602] type=1400 audit(1660292169.806:436): avc: denied { read } for comm="Binder:668_2" name="wakeup4" dev="sysfs" ino=54692 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[  103.117815][  T673] audit: audit_lost=173 audit_rate_limit=5 audit_backlog_limit=64
[  103.119275][  T602] type=1400 audit(1660292169.814:437): avc: denied { read } for comm="Binder:668_2" name="wakeup28" dev="sysfs" ino=75472 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[  103.126838][  T673] audit: rate limit exceeded
[  103.152087][  T602] type=1400 audit(1660292169.822:438): avc: denied { read } for comm="Binder:668_2" name="wakeup18" dev="sysfs" ino=72493 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[  103.172852][  T602] type=1400 audit(1660292169.822:439): avc: denied { read } for comm="Binder:668_2" name="wakeup46" dev="sysfs" ino=95114 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[  103.193399][  T602] type=1400 audit(1660292169.822:440): avc: denied { read } for comm="Binder:668_2" name="wakeup2" dev="sysfs" ino=54638 scontext=u:r:system_suspend:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=0
[  103.236733][    C5] ALERT: changing window size from 20000000 to 16000000 at 103228061366

DEBUG：

1.关于屏调试的打印log:

echo 8 > /proc/sys/kernel/printk
echo ‘file dsi* +p’ > /sys/kernel/debug/dynamic_debug/control

cat /sys/kernel/debug/dri/0/debug/dump
cat  /d/regulator

 kodiak:/d/regulator/18200000.rsc:rpmh-regulator-ldoc12-pm8350c_l12 # cat 
consumers
 kodiak:/d/regulator/18200000.rsc:rpmh-regulator-ldoc13-pm8350c_l13 # cat 
consumers

2.根据log发现唤醒失败时堵塞在这里，因此跳过：

kernel/msm-5.4/techpack/display/msm/sde/sde_rm.c

int sde_rm_reserve(
		struct sde_rm *rm,
		struct drm_encoder *enc,
		struct drm_crtc_state *crtc_state,
		struct drm_connector_state *conn_state,
		bool test_only)
{
	struct sde_rm_rsvp *rsvp_cur, *rsvp_nxt;
	struct sde_rm_requirements reqs = {0,};
	struct msm_drm_private *priv;
	struct sde_kms *sde_kms;
	struct msm_compression_info *comp_info;
	int ret = 0;

	if (!rm || !enc || !crtc_state || !conn_state) {
		SDE_ERROR("invalid arguments\n");
		return -EINVAL;
	}

	if (!enc->dev || !enc->dev->dev_private) {
		SDE_ERROR("drm device invalid\n");
		return -EINVAL;
	}
	priv = enc->dev->dev_private;
	if (!priv->kms) {
		SDE_ERROR("invalid kms\n");
		return -EINVAL;
	}
	sde_kms = to_sde_kms(priv->kms);

	/* Check if this is just a page-flip */
	if (!_sde_rm_is_display_in_cont_splash(sde_kms, enc) &&
			!drm_atomic_crtc_needs_modeset(crtc_state))
		return 0;

	comp_info = kzalloc(sizeof(*comp_info), GFP_KERNEL);
	if (!comp_info)
		return -ENOMEM;

	SDE_DEBUG("reserving hw for conn %d enc %d crtc %d test_only %d\n",
			conn_state->connector->base.id, enc->base.id,
			crtc_state->crtc->base.id, test_only);
	SDE_EVT32(enc->base.id, conn_state->connector->base.id);

	mutex_lock(&rm->rm_lock);

	_sde_rm_print_rsvps(rm, SDE_RM_STAGE_BEGIN);

	rsvp_cur = _sde_rm_get_rsvp_cur(rm, enc);
	rsvp_nxt = _sde_rm_get_rsvp_nxt(rm, enc);

	/*
	 * RM currently relies on rsvp_nxt assigned to the hw blocks to
	 * commit rsvps. This rsvp_nxt can be cleared by a back to back
	 * check_only commit with modeset when its predecessor atomic
	 * commit is delayed / not committed the reservation yet.
	 * Poll for rsvp_nxt clear, allow the check_only commit if rsvp_nxt
	 * gets cleared and bailout if it does not get cleared before timeout.
	 */
	if (test_only && rsvp_nxt) {
		rsvp_nxt = _sde_rm_poll_get_rsvp_nxt_locked(rm, enc);
		rsvp_cur = _sde_rm_get_rsvp_cur(rm, enc);
		if (rsvp_nxt) {
			SDE_ERROR("poll timeout cur %d nxt %d enc %d\n",
				(rsvp_cur) ? rsvp_cur->seq : -1,
				rsvp_nxt->seq, enc->base.id);
			SDE_EVT32(enc->base.id, (rsvp_cur) ? rsvp_cur->seq : -1,
					rsvp_nxt->seq, SDE_EVTLOG_ERROR);
//modify by zh 
			//ret = -EINVAL;
			//goto end;
//modify by zh end
		}
	}

	if (!test_only && rsvp_nxt)
		goto commit_rsvp;

	reqs.hw_res.comp_info = comp_info;
	ret = _sde_rm_populate_requirements(rm, enc, crtc_state,
			conn_state, &reqs);
	if (ret) {
		SDE_ERROR("failed to populate hw requirements\n");
		goto end;
	}
墨染天姬
关注
  • 0
    点赞
  • 踩
  • 2
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
专栏目录
android学习笔记 按电源键屏幕唤醒和屏幕睡眠流程（从上层到kernel）
shadow_dance的专栏
10-14 3万+
一. 屏幕的唤醒       首先inputread在读取到有keyboard事件上报后，会调用到keydispatch的notifykey，去询问wm是否会对这次按键特殊处理,如果WM不处理，则此处会点亮或者熄灭屏幕。      inputReader.cpp                                 KeyboardInputMapper::processKey
QCS6490、QCM6490 高通物联网模组 解决方案
Mandy_mjd的博客
12-01 7169
QCS6490和QCM6490是高通公司专门面向高端物联网终端而优化的首款物联网解决方案，旨在提供顶级特性，包括全球5G连接和超高速Wi-Fi 6E。凭借Kryo 670 CPU架构，该解决方案提供强大性能并专为工业和商业物联网应用打造，该解决方案支持5G毫米波/Sub-6GHz和Wi-Fi 6E，支持最新一代加固式手持设备和平板电脑、工业扫描仪及人机界面系统。 与前代解决方案相比，该解决方案通过强大的连接、更低时延、动态三ISP和第6代高通AI引擎实现的先进边缘AI与计算，在降低功耗的同时提供强大性能。
QCM6490 SSR 记述（一）
weixin_40970718的博客
09-15 1820
modem 子系统crash导致系统crash，偶现。且SSR已经关闭。
QCM6490启动流程梳理
weixin_40970718的博客
09-29 980
高通平台启动过程简述。
QCM6490 按键调试
weixin_40970718的博客
01-06 514
前言： 首先我们这个项目有5个按键 音量+ 音量- 开机键 RST键 HOME键 我们需要分两块看这个按键： 1.开机之前需要进行组合按键，比如组合按键进fastboot ,组合按键强制下载 衍生：USB的D+接地进强制下载？代码逻辑？ 2.开机之后的按键功能 原理图： 代码移植： 一、组合按键移植 二、功能键调试 如何DEBUG： 1.代码逻辑分析 2.DEBUG手法 ...
QCM6490 打开KASAN
03-03
对于android死机问题，打开KASAN后会打印更多信息，这样复现抓取dump能更好的debug死机问题。
查看cpu占用率，QCM6490 SM6350等平台实际验证可用
11-15
push 到system/bin/下 mpstat -P ALL 3 Linux 5.10.110-qki-consolidate-android12-9-gbd7873aec79c-dirty (localhost) 11/01/22 _aarch64_ (8 CPU) 02:55:28 CPU %usr %nice %sys %iowait %irq %soft %steal %...
基于QCM传感器的生物芯片检测电路的设计
07-30
QCM凝血传感器通过红细胞阻抗特性的变化引起传感器的响应来检测红细胞凝集时间和沉降速率。
一种QCM信号在线采集系统的实现
12-09
摘要：石英晶体微天平（QCM）信号采集系统的设计质量是影响其测量精度的重要因素。提出了一种QCM信号在线系统的实现方案，给出了系统的结构框图，并对系统电路进行了详细的分析。 关键词：石英晶体微天平 DSP 谐振...
timefd锁解析
01-07 1427
2.5.3 All kernel wake locks 按持锁时间排序，显示不同内核锁的持锁时间和次数。 batterystats会从/proc/wakelocks和/d/wakeup_sources这两个文件中读取内核的持锁情况。有兴趣的读者可以查阅源码KernelWakelockReader.java。 All kernel wake locks: Kernel Wake lo...
【sdx62】加载wifi驱动出现 Refused to change power state, currently in D3问题分析及解决方案
wgl307293845的博客
04-07 1747
问题log [ 68.590722] wlan: Loading driver v5.2.0.247A +TIMER_MANAGER +MEMORY_DEBUG; cld:; cmn:; dev:wlan [ 68.617968] msm_pcie_pm_control: PCIe: RC0: requested to resume when link is already powered on. [ 68.641154] cnss_pci 0000:03:00.0: Refused to
GPIO
paopao200327的专栏
07-03 5419
编写控制程序 GPIO的配置文件在/sys/class/gpio目录下，控制程序可以分为四个步骤： 配置GPIO：在/sys/class/gpio目录下可以看到文件export，调用该文件以实现配置。该文件对所有GPIO编号，从0开始。GPIOn_x的编号为32*n+x，例如此处用的GPIO1_6的编号为32*1+6=38。在终端输入：# echo "38" > /sys/class/
Linux GPIO 驱动 （gpiolib）
u012787604的博客
04-13 932
前情 基于 linux gpio 会在 /sys/class/gpio 目录下会生成 export, unexport 文件，当然也有 gpiochipx 文件，gpiochipx 是对引脚的管理，如某一个 chip 可能控制着一定数量的引脚，在相应目录下 ngpio 是控制的数量。 执行 echo 4 > /sys/class/gpio/export 的时候会在 /sys/class/gpio 目录下生成 gpio4 目录，在这个目录下会有 如 value, edge, direction 等相关文
linux电源管理--wakesource
小小小小的专栏
12-08 4732
1、框架介绍 实现所在文件：drivers\base\power\wakeup.c 函数所在文件：include\linux\pm_wakeup.h 该文件函数较多，主要实现了wakesource的功能，用于系统判断当前是否有事件阻止睡眠。整套框架基本上是围绕着combined_event_count这个变量在处理逻辑，在此变量中，高16位记录系统所有的wakeup event总数，低16位记录是否有wakeup events在处理中。在每次调用wakeup_source_activate时，wake
QCM6490 QUDTT测试
weixin_40970718的博客
10-19 4783
前言： 基于最新版 QDUTT（QCOM DDR USB TEST TOOL） 2.0.2 介绍了如何使用 QDUTT 对 SDM845/SDM670/SDM710/ SM8150/SC8180X/SM6150/SM7150/SM8250/SM7250 芯片组运行 DDR 调试映像 (DDI) 测 试。本文档面向工作内容涉及对这些设备进行内存测试的软件工程师。 SDM845/SDM670/SDM710/SM8150/SC8180X/SM6150/SM7150/SM8250/SM7250 芯片组中引 入了 D
简单的oops调试
m0_37797953的博客
04-17 648
oops ~ # insmod /mnt/oops.ko [ 117.135066] oops: loading out-of-tree module taints kernel. [ 117.142239] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 117.142564] Mem abort info: [ 117.142679] ESR = 0x960...
基于wakeup_source的linux内核睡眠机制
佛系程序员
03-12 5892
一：wakeup_source简介：      linux 3.4内核PM使用了wakeup_source来保持唤醒状态，也就是keep awake。之前android一直是基于Linux加入了wake_lock机制来阻止系统休眠，后来Linux 3.4内核加入了wakeup_source来管理，安卓4.4跟着升级内核也就摒弃了自己的繁杂的wake_lock机制，在对上层接口并不改变，在内核
Linux驱动开发———GPIO有效电平解析
Aa_lihua的博客
12-19 5915
设备树
linux内核3.4基于wakeup_source的autosleep机制分析
Focus on the Linux kernel
11-24 5958
一：wakeup_source简介：     linux 3.4内核PM使用了wakeup_source来保持唤醒状态，也就是keep awake。之前android一直是基于Linux加入了wake_lock机制来阻止系统休眠，后来Linux 3.4内核加入了wakeup_source来管理，安卓4.4跟着升级内核也就摒弃了自己的臃肿的wake_lock机制，在对上层接口并不改变，在内核wak
qcm6490启动流程梳理
最新发布
10-09
QCM6490启动流程梳理： QCM6490是一种启动流程的处理器芯片，它具有一系列的启动流程。 首先，当电源被打开时，芯片进入到Reset状态，在这个状态下，芯片的所有寄存器、电路和功能都被重置为初始状态。接下来，芯片...

“相关推荐”对你有帮助么？

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

墨染天姬

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值