各类交换机动态链路聚合配置

戴尔交换机

int range tengigabitethernet 0/31 , tengigabitethernet 0/34

no sw

port-channel-protocol LACP

port-channel 2 mode active 

no shutdown

int port-channel 2

sw

no shutdown

int vlan 1

untagged po 1 #acees模式

no shutdown

盛科

interface eth-0-19
switchport mode trunk
switchport trunk allowed vlan all
channel-group 2 mode active

华三

接口

port link-mode bridge
port link-type trunk
port trunk permit vlan all
port link-aggregation group 1

动态聚合组

int Bridge-Aggregation 1
port link-type trunk
port trunk permit vlan all
link-aggregation mode dynamic

华为  #CE系列交换机的配置需要退回用户视图保存后生效

[~10G-D13-1-CE6810]int Eth-Trunk 40
 

[*10G-D13-1-CE6810-Eth-Trunk40]mode lacp-dynamic
Warning: The dynamic LACP mode is used only when the local device connects to a server. In other scenarios, configuring the static LACP mode is recommended to prevent potential loops.

[*10G-D13-1-CE6810-Eth-Trunk40]port link-type trunk

[*10G-D13-1-CE6810-Eth-Trunk40]port trunk allow-pass vlan all

Info: Some VLANs are not created. Please create them to make the configuration take effect.

[*10G-D13-1-CE6810-Eth-Trunk40]trunkport 40GE 1/0/1 to 1/0/4