# 将以太网端口Ethernet2/0/1至Ethernet2/0/3加入聚合组1。
[DeviceA] interface ethernet 2/0/1
[DeviceA-Ethernet2/0/1] port link-aggregation group 1
[DeviceA-Ethernet2/0/1] interface ethernet 2/0/2
[DeviceA-Ethernet2/0/2] port link-aggregation group 1
[DeviceA-Ethernet2/0/2] interface ethernet 2/0/3
[DeviceA-Ethernet2/0/3] port link-aggregation group 1
l 采用动态聚合模式
# 创建二层聚合端口1,并配置成动态聚合模式。
<DeviceA> system-view
[DeviceA] interface bridge-aggregation 1
[DeviceA-Bridge-Aggregation1] link-aggregation mode dynamic
[DeviceA-Bridge-Aggregation1] quit
===========================================================