零:老鸟嫌长不看版:
- 在BIOS系统设置中修改Boot Mode 为 Legacy Only(可能得先把CSM改为Enabled,要不然改不了Boot Mode ),重启后在Startup Device Menu 选择Legacy:USB
- 如果上述方案不能解决,尝试几次插拔U盘,或有奇效...
一:出问题时的预置条件:
制作centOS启动盘安装系统,同时修改BIOS系统设置如下(开机狂按F12):
- BIOS ->“Optimized Defaults” ,设置为 “Enabled”
- “Security” ->“Secure Boot”,设置为“Disabled”
二:最初的安装过程:
1.Startup Device Menu选择UEFI: USB, Partition 4
2:选择安装CentOS 7
3.问题出现:usb cant enable maybe the usb cable is bad
三:解决方案
- 在BIOS系统设置中修改Boot Mode 为 Legacy Only(可能得先把CSM改为Enabled,要不然改不了Boot Mode )
- 如果采取上述方案之后依然出现该问题,尝试几次插拔U盘,或有奇效...