【源码】三相逆变器的有功和无功功率控制仿真

说明：

-该存储库包含的SIMULINK模型用于控制连接到公用电网三相VSI的P和Q。使用PI控制器（即外环）调节有功功率以跟踪指令值，然后，PI调节器的输出代表由内PI控制器调节的逆变器参考直流轴电流。

同样的程序也适用于无功功率，但产生逆变器的参考正交电流。

Description:

-This repository contains the SIMULINK model to control P and Q of the 3-phase VSI connected to the utility grid. The active power is regulated to track the command value using the PI controller (i.e., outer loop), and then the output of the PI regulator represents the reference direct axis current of the inverter which is regulated by the inner PI controller.

The same procedure could be applied to the reactive power, but to generate the reference quadrature current of the inverter.

用法：

-直接运行文件。

-模型参数包含在模型属性中。

Usage:

• Run the file directly.

• The model parameters are involved in the model properties.

需要使用MATLAB 2019a或以上版本。

Requirement:

-This model is compatible with Matlab R2019b and the most recent versions.

Contact:

-For further information, please feel free to contact me:

Name:- Abualkasim Bakeer

Position:- Teaching-Assistant at Faculty of Engineering, Aswan University, Aswan, Egypt

Email:- abualkasim.bakeer@aswu.edu.eg

参考文献：

Eventually, if you use the simulink model or relevant to your academic work, please cite one of the relevant articles 😃, 1. https://ieeexplore.ieee.org/abstract/document/7470518 2. https://www.mdpi.com/1996-1073/13/21/5641 3. https://www.mdpi.com/1996-1073/13/16/4220

更多精彩文章请关注公众号：