华为交换机创建Vlan，批量加入对应端口号

现在我们就开始

启动模拟器

system-view
[Huawei]sysname sw1
[sw1]vlan 10
[sw1-vlan10]quit
[sw1]port-group 1
[sw1-port-group-1]group-member GigabitEthernet 0/0/1 to GigabitEthernet 0/0/10
[sw1-port-group-1]port link-type access
[sw1-GigabitEthernet0/0/1]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/2]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/3]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/4]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/5]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/6]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/7]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/8]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/9]port link-type access //接口类型为access
[sw1-GigabitEthernet0/0/10]port link-type access //接口类型为access
[sw1-port-group-1]port default vlan 10
[sw1-GigabitEthernet0/0/1]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/2]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/3]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/4]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/5]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/6]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/7]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/8]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/9]port default vlan 10//成功把接口加入vlan10
[sw1-GigabitEthernet0/0/10]port default vlan 10//成功把接口加入vlan10

查看vlan配置情况
[sw1]display vlan
The total number of vlans is : 2

U: Up; D: Down; TG: Tagged; UT: Untagged;
MP: Vlan-mapping; ST: Vlan-stacking;
#: ProtocolTransparent-vlan; *: Management-vlan;

VID Type Ports

1 common UT:GE0/0/11(U) GE0/0/12(U) GE0/0/13(D) GE0/0/14(D)
GE0/0/15(D) GE0/0/16(D) GE0/0/17(D) GE0/0/18(D)
GE0/0/19(D) GE0/0/20(D) GE0/0/21(D) GE0/0/22(D)
GE0/0/23(D) GE0/0/24(D)

10 common UT:GE0/0/1(U) GE0/0/2(U) GE0/0/3(D) GE0/0/4(D)
GE0/0/5(D) GE0/0/6(D) GE0/0/7(D) GE0/0/8(D)
GE0/0/9(D) GE0/0/10(D)

VID Status Property MAC-LRN Statistics Description

1 enable default enable disable VLAN 0001
10 enable default enable disable VLAN 0010

查看交换机当前配置
[sw1]display current-configuration //current(当前的，现在发生的)