spring cloud 集成seata记录

spring cloud 集成seata记录

下载安装包

地址

解压

配置

解压后是没有config.txt文件的，需要新建三个文件

1. config.txt 放在seata根目录下

这个文件要修改下面几个地方

这里要对应配置文件的这里

注意：这里有个坑，部署到服务器上面会因为服务器的版本过高导致驱动不匹配

需要将store.db.driverClassName=com.mysql.cj.jdbc.Driver修改成这个，并且去这里找到你的数据库所对应的版本驱动

1、mysql>select version(); 查看mqsql版本，我的版本是8.0.19。

2.然后将下载好的驱动放到lib目录下的jdbc目录下，并且删掉其他的驱动

这里的要新建一个Seata数据库并新建表：sql如下

SET NAMES utf8mb4;
SET FOREIGN_KEY_CHECKS = 0;

-- ----------------------------
-- Table structure for branch_table
-- ----------------------------
DROP TABLE IF EXISTS `branch_table`;
CREATE TABLE `branch_table`  (
  `branch_id` bigint(20) NOT NULL,
  `xid` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL,
  `transaction_id` bigint(20) NULL DEFAULT NULL,
  `resource_group_id` varchar(32) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `resource_id` varchar(256) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `branch_type` varchar(8) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `status` tinyint(4) NULL DEFAULT NULL,
  `client_id` varchar(64) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `application_data` varchar(2000) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `gmt_create` datetime(6) NULL DEFAULT NULL,
  `gmt_modified` datetime(6) NULL DEFAULT NULL,
  PRIMARY KEY (`branch_id`) USING BTREE,
  INDEX `idx_xid`(`xid`) USING BTREE
) ENGINE = InnoDB CHARACTER SET = utf8 COLLATE = utf8_general_ci ROW_FORMAT = Dynamic;

-- ----------------------------
-- Table structure for global_table
-- ----------------------------
DROP TABLE IF EXISTS `global_table`;
CREATE TABLE `global_table`  (
  `xid` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL,
  `transaction_id` bigint(20) NULL DEFAULT NULL,
  `status` tinyint(4) NOT NULL,
  `application_id` varchar(32) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `transaction_service_group` varchar(32) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `transaction_name` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `timeout` int(11) NULL DEFAULT NULL,
  `begin_time` bigint(20) NULL DEFAULT NULL,
  `application_data` varchar(2000) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `gmt_create` datetime NULL DEFAULT NULL,
  `gmt_modified` datetime NULL DEFAULT NULL,
  PRIMARY KEY (`xid`) USING BTREE,
  INDEX `idx_gmt_modified_status`(`gmt_modified`, `status`) USING BTREE,
  INDEX `idx_transaction_id`(`transaction_id`) USING BTREE
) ENGINE = InnoDB CHARACTER SET = utf8 COLLATE = utf8_general_ci ROW_FORMAT = Dynamic;

-- ----------------------------
-- Table structure for lock_table
-- ----------------------------
DROP TABLE IF EXISTS `lock_table`;
CREATE TABLE `lock_table`  (
  `row_key` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL,
  `xid` varchar(96) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `transaction_id` bigint(20) NULL DEFAULT NULL,
  `branch_id` bigint(20) NOT NULL,
  `resource_id` varchar(256) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `table_name` varchar(32) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `pk` varchar(255) CHARACTER SET utf8 COLLATE utf8_general_ci NULL DEFAULT NULL,
  `gmt_create` datetime NULL DEFAULT NULL,
  `gmt_modified` datetime NULL DEFAULT NULL,
  PRIMARY KEY (`row_key`) USING BTREE,
  INDEX `idx_branch_id`(`branch_id`) USING BTREE
) ENGINE = InnoDB CHARACTER SET = utf8 COLLATE = utf8_general_ci ROW_FORMAT = Dynamic;

并且需要在业务数据库新建一张undo表，如果有多个数据库则每个数据库都需要新建

-- ----------------------------
-- Table structure for undo_log
-- ----------------------------
DROP TABLE IF EXISTS `undo_log`;
CREATE TABLE `undo_log`  (
  `branch_id` bigint(20) NOT NULL COMMENT 'branch transaction id',
  `xid` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL COMMENT 'global transaction id',
  `context` varchar(128) CHARACTER SET utf8 COLLATE utf8_general_ci NOT NULL COMMENT 'undo_log context,such as serialization',
  `rollback_info` longblob NOT NULL COMMENT 'rollback info',
  `log_status` int(11) NOT NULL COMMENT '0:normal status,1:defense status',
  `log_created` datetime(6) NOT NULL COMMENT 'create datetime',
  `log_modified` datetime(6) NOT NULL COMMENT 'modify datetime',
  UNIQUE INDEX `ux_undo_log`(`xid`, `branch_id`) USING BTREE
) ENGINE = InnoDB CHARACTER SET = utf8 COLLATE = utf8_general_ci COMMENT = 'AT transaction mode undo table' ROW_FORMAT = Dynamic;

SET FOREIGN_KEY_CHECKS = 1;

#For details about configuration items, see https://seata.io/zh-cn/docs/user/configurations.html
#Transport configuration, for client and server
transport.type=TCP
transport.server=NIO
transport.heartbeat=true
transport.enableTmClientBatchSendRequest=false
transport.enableRmClientBatchSendRequest=true
transport.enableTcServerBatchSendResponse=false
transport.rpcRmRequestTimeout=30000
transport.rpcTmRequestTimeout=30000
transport.rpcTcRequestTimeout=30000
transport.threadFactory.bossThreadPrefix=NettyBoss
transport.threadFactory.workerThreadPrefix=NettyServerNIOWorker
transport.threadFactory.serverExecutorThreadPrefix=NettyServerBizHandler
transport.threadFactory.shareBossWorker=false
transport.threadFactory.clientSelectorThreadPrefix=NettyClientSelector
transport.threadFactory.clientSelectorThreadSize=1
transport.threadFactory.clientWorkerThreadPrefix=NettyClientWorkerThread
transport.threadFactory.bossThreadSize=1
transport.threadFactory.workerThreadSize=default
transport.shutdown.wait=3
transport.serialization=seata
transport.compressor=none

#Transaction routing rules configuration, only for the client
service.vgroupMapping.my_test_tx_group=default
#If you use a registry, you can ignore it
service.default.grouplist=127.0.0.1:8091
service.enableDegrade=false
service.disableGlobalTransaction=false

#Transaction rule configuration, only for the client
client.rm.asyncCommitBufferLimit=10000
client.rm.lock.retryInterval=10
client.rm.lock.retryTimes=30
client.rm.lock.retryPolicyBranchRollbackOnConflict=true
client.rm.reportRetryCount=5
client.rm.tableMetaCheckEnable=true
client.rm.tableMetaCheckerInterval=60000
client.rm.sqlParserType=druid
client.rm.reportSuccessEnable=false
client.rm.sagaBranchRegisterEnable=false
client.rm.sagaJsonParser=fastjson
client.rm.tccActionInterceptorOrder=-2147482648
client.tm.commitRetryCount=5
client.tm.rollbackRetryCount=5
client.tm.defaultGlobalTransactionTimeout=60000
client.tm.degradeCheck=false
client.tm.degradeCheckAllowTimes=10
client.tm.degradeCheckPeriod=2000
client.tm.interceptorOrder=-2147482648
client.undo.dataValidation=true
client.undo.logSerialization=jackson
client.undo.onlyCareUpdateColumns=true
server.undo.logSaveDays=7
server.undo.logDeletePeriod=86400000
client.undo.logTable=undo_log
client.undo.compress.enable=true
client.undo.compress.type=zip
client.undo.compress.threshold=64k
#For TCC transaction mode
tcc.fence.logTableName=tcc_fence_log
tcc.fence.cleanPeriod=1h

#Log rule configuration, for client and server
log.exceptionRate=100

#Transaction storage configuration, only for the server. The file, db, and redis configuration values are optional.
store.mode=db
store.lock.mode=file
store.session.mode=file
#Used for password encryption
store.publicKey=

#If `store.mode,store.lock.mode,store.session.mode` are not equal to `file`, you can remove the configuration block.
store.file.dir=file_store/data
store.file.maxBranchSessionSize=16384
store.file.maxGlobalSessionSize=512
store.file.fileWriteBufferCacheSize=16384
store.file.flushDiskMode=async
store.file.sessionReloadReadSize=100

#These configurations are required if the `store mode` is `db`. If `store.mode,store.lock.mode,store.session.mode` are not equal to `db`, you can remove the configuration block.
store.db.datasource=druid
store.db.dbType=mysql
store.db.driverClassName=com.mysql.cj.jdbc.Driver
store.db.url=jdbc:mysql://192.168.1.102:3306/seata?useUnicode=true&rewriteBatchedStatements=true
store.db.user=demo
store.db.password=qweQWE@#$%^&*123456
store.db.minConn=5
store.db.maxConn=30
store.db.globalTable=global_table
store.db.branchTable=branch_table
store.db.distributedLockTable=distributed_lock
store.db.queryLimit=100
store.db.lockTable=lock_table
store.db.maxWait=5000

#These configurations are required if the `store mode` is `redis`. If `store.mode,store.lock.mode,store.session.mode` are not equal to `redis`, you can remove the configuration block.
store.redis.mode=single
store.redis.single.host=127.0.0.1
store.redis.single.port=6379
store.redis.sentinel.masterName=
store.redis.sentinel.sentinelHosts=
store.redis.maxConn=10
store.redis.minConn=1
store.redis.maxTotal=100
store.redis.database=0
store.redis.password=
store.redis.queryLimit=100

#Transaction rule configuration, only for the server
server.recovery.committingRetryPeriod=1000
server.recovery.asynCommittingRetryPeriod=1000
server.recovery.rollbackingRetryPeriod=1000
server.recovery.timeoutRetryPeriod=1000
server.maxCommitRetryTimeout=-1
server.maxRollbackRetryTimeout=-1
server.rollbackRetryTimeoutUnlockEnable=false
server.distributedLockExpireTime=10000
server.xaerNotaRetryTimeout=60000
server.session.branchAsyncQueueSize=5000
server.session.enableBranchAsyncRemove=false
server.enableParallelRequestHandle=false

#Metrics configuration, only for the server
metrics.enabled=false
metrics.registryType=compact
metrics.exporterList=prometheus
metrics.exporterPrometheusPort=9898```

2. 这两个 放在conf目录下

nacos-config.sh

#!/bin/sh
# Copyright 1999-2019 Seata.io Group.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at、
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

while getopts ":h:p:g:t:u:w:" opt
do
  case $opt in
  h)
    host=$OPTARG
    ;;
  p)
    port=$OPTARG
    ;;
  g)
    group=$OPTARG
    ;;
  t)
    tenant=$OPTARG
    ;;
  u)
    username=$OPTARG
    ;;
  w)
    password=$OPTARG
    ;;
  ?)
    echo " USAGE OPTION: $0 [-h host] [-p port] [-g group] [-t tenant] [-u username] [-w password] "
    exit 1
    ;;
  esac
done

if [ -z ${host} ]; then
    host=localhost
fi
if [ -z ${port} ]; then
    port=8848
fi
if [ -z ${group} ]; then
    group="SEATA_GROUP"
fi
if [ -z ${tenant} ]; then
    tenant=""
fi
if [ -z ${username} ]; then
    username=""
fi
if [ -z ${password} ]; then
    password=""
fi

nacosAddr=$host:$port
contentType="content-type:application/json;charset=UTF-8"

echo "set nacosAddr=$nacosAddr"
echo "set group=$group"

urlencode() {
  length="${#1}"
  i=0
  while [ $length -gt $i ]; do
    char="${1:$i:1}"
    case $char in
    [a-zA-Z0-9.~_-]) printf $char ;;
    *) printf '%%%02X' "'$char" ;;
    esac
    i=`expr $i + 1`
  done
}

failCount=0
tempLog=$(mktemp -u)
function addConfig() {
  dataId=`urlencode $1`
  content=`urlencode $2`
  curl -X POST -H "${contentType}" "http://$nacosAddr/nacos/v1/cs/configs?dataId=$dataId&group=$group&content=$content&tenant=$tenant&username=$username&password=$password" >"${tempLog}" 2>/dev/null
  if [ -z $(cat "${tempLog}") ]; then
    echo " Please check the cluster status. "
    exit 1
  fi
  if [ "$(cat "${tempLog}")" == "true" ]; then
    echo "Set $1=$2 successfully "
  else
    echo "Set $1=$2 failure "
    failCount=`expr $failCount + 1`
  fi
}

count=0
COMMENT_START="#"
for line in $(cat $(dirname "$PWD")/config.txt | sed s/[[:space:]]//g); do
    if [[ "$line" =~ ^"${COMMENT_START}".*  ]]; then
      continue
    fi
    count=`expr $count + 1`
	  key=${line%%=*}
    value=${line#*=}
	  addConfig "${key}" "${value}"
done

echo "========================================================================="
echo " Complete initialization parameters,  total-count:$count ,  failure-count:$failCount "
echo "========================================================================="

if [ ${failCount} -eq 0 ]; then
	echo " Init nacos config finished, please start seata-server. "
else
	echo " init nacos config fail. "
fi

nacos-config.py

#!/usr/bin/env python3
#  -*- coding: UTF-8 -*-

import http.client
import sys
import getopt as opts
import urllib.parse
import re


def get_params() -> dict:
    params = {
        '-h': '127.0.0.1',
        '-p': '8848',
        '-t': '',
        '-g': 'SEATA_GROUP',
        '-u': '',
        '-w': ''
    }
    inputs, args = opts.getopt(sys.argv[1:], shortopts='h:p:t:g:u:w:')
    for k, v in inputs:
        params[k] = v
    print(params)
    return params

def error_exit():
    print('python nacos-config.py [-h host] [-p port] [-t tenant] [-g group] [-u username] [-w password]')
    exit()

def get_pair(line: str) -> tuple:
    res = re.match(r"([\.\w]+)=(.*)",line)
    return res.groups() if res is not None else ['','']


headers = {
    'content-type': "application/x-www-form-urlencoded"
}

hasError = False

params = get_params()

url_prefix = f"{params['-h']}:{params['-p']}"
tenant = params['-t']
username = params['-u']
password = params['-w']
group = params['-g']
url_postfix_base = f'/nacos/v1/cs/configs?group={group}&tenant={tenant}'

if username != '' and password != '':
    url_postfix_base += f'&username={username}&password={password}'

if url_prefix == ':':
    error_exit()

for line in open('../config.txt'):
    pair = get_pair(line.rstrip("\n"))
    if len(pair) < 2 or pair[0] == '' or pair[0].startswith("#") or pair[1] == '':
        continue
    url_postfix = url_postfix_base + f'&dataId={urllib.parse.quote(str(pair[0]))}&content={urllib.parse.quote(str(pair[1])).strip()}'
    conn = http.client.HTTPConnection(url_prefix)
    conn.request("POST", url_postfix, headers=headers)
    res = conn.getresponse()
    data = res.read().decode("utf-8")
    if data != "true":
        hasError = True
    print(f"{pair[0]}={pair[1]} {data if hasError else 'success'}")

if hasError:
    print("init nacos config fail.")
else:
    print("init nacos config finished, please start seata-server.")

3. registry.conf

registry {
  # file 、nacos 、eureka、redis、zk、consul、etcd3、sofa
  type = "nacos"

  nacos {
    application = "seata-server"
    serverAddr = "127.0.0.1:8848"
    group = "SEATA_GROUP"
    namespace = ""
    cluster = "default"
    username = ""
    password = ""
  }
  eureka {
    serviceUrl = "http://localhost:8761/eureka"
    application = "default"
    weight = "1"
  }
  redis {
    serverAddr = "localhost:6379"
    db = 0
    password = ""
    cluster = "default"
    timeout = 0
  }
  zk {
    cluster = "default"
    serverAddr = "127.0.0.1:2181"
    sessionTimeout = 6000
    connectTimeout = 2000
    username = ""
    password = ""
  }
  consul {
    cluster = "default"
    serverAddr = "127.0.0.1:8500"
    aclToken = ""
  }
  etcd3 {
    cluster = "default"
    serverAddr = "http://localhost:2379"
  }
  sofa {
    serverAddr = "127.0.0.1:9603"
    application = "default"
    region = "DEFAULT_ZONE"
    datacenter = "DefaultDataCenter"
    cluster = "default"
    group = "SEATA_GROUP"
    addressWaitTime = "3000"
  }
  file {
    name = "file.conf"
  }
}

config {
  # file、nacos 、apollo、zk、consul、etcd3
  type = "nacos"

  nacos {
    serverAddr = "127.0.0.1:8848"
    namespace = ""
    group = "SEATA_GROUP"
    username = "nacos"
    password = "nacos"
    dataId = "seataServer.properties"
  }
  consul {
    serverAddr = "127.0.0.1:8500"
    aclToken = ""
  }
  apollo {
    appId = "seata-server"
    ## apolloConfigService will cover apolloMeta
    apolloMeta = "http://192.168.1.204:8801"
    apolloConfigService = "http://192.168.1.204:8080"
    namespace = "application"
    apolloAccesskeySecret = ""
    cluster = "seata"
  }
  zk {
    serverAddr = "127.0.0.1:2181"
    sessionTimeout = 6000
    connectTimeout = 2000
    username = ""
    password = ""
    nodePath = "/seata/seata.properties"
  }
  etcd3 {
    serverAddr = "http://localhost:2379"
  }
  file {
    name = "file.conf"
  }
}

启动seata

1.使用conf目录下的nacos-config.sh，将config.txt文件里面的内容推送到nacos上

sudo bash nacos-config.sh -h localhost -p 8848 -u nacos -w nacos

注：windows平台可以使用Git 运行nacos-config.sh脚本

nacos-config.sh命令的参数如下：

sh nacos-config.sh -h localhost -p 8848 -u username -w password

Parameter Description:

-h: host, the default value is localhost.

-p: port, the default value is 8848.

-g: Configure grouping, the default value is 'SEATA_GROUP'.

-t: Tenant information, corresponding to the namespace ID field of Nacos, the default value is ''.

-u: username, nacos 1.2.0+ on permission control, the default value is ''.

-w: password, nacos 1.2.0+ on permission control, the default value is ''.

执行成功后，打开nacos控制台

2.启动seata

执行 seata-server-1.4.2\bin 目录下的 seata-server.bat/seata-server.sh 启动seata服务nohup bash seata-server.sh > seata.log 2>&1 &

打开nacos控制台，此时seata已经成功注册到nacos注册中心

代码配置

在parent文件增加依赖

 <alibaba.cloud.version>2.2.5.RELEASE</alibaba.cloud.version>

			<!--分布式事务 seata-->
            <dependency>
                <groupId>com.alibaba.cloud</groupId>
                <artifactId>spring-cloud-starter-alibaba-seata</artifactId>
                <version>${alibaba.cloud.version}</version>
            </dependency>

以及所有子服务增加

		<dependency>
            <groupId>com.alibaba.cloud</groupId>
            <artifactId>spring-cloud-starter-alibaba-seata</artifactId>
        </dependency>

根据不同的服务增加不同的yml配置

# seata config
seata:
  enabled: true
  application-id: user-service # 这个根据不同的服务进行修改
  tx-service-group: my_test_tx_group # 事务群组（可以每个应用单独取名，也可以使用相同名字，独立起名需要配置nacos）
  registry:
    type: nacos
    nacos:
      server-addr: 127.0.0.1:8848
      namespace:
      cluster: default
  config:
    type: nacos
    nacos:
      namespace:
      server-addr: 127.0.0.1:8848

nacos配置也需要改变

spring:
  cloud:
    nacos:
      discovery:
        server-addr: 127.0.0.1:8848
      namespace: dev #根据不同的服务环境进行配置
    config:
      namespace: dev
      server-addr: 127.0.0.1:8848

使用

场景：A服务调用B服务

则在A服务的方法上增加这个注解

@GlobalTransactional(timeoutMills = 10000, name = "spring-cloud-seata", rollbackFor = Exception.class)

则在B服务的方法上增加这个注解

    @Transactional(rollbackFor = Exception.class)

参考链接

在linux执行.sh脚本启动seata的时候报gc的错，原因是jdk版本太高

解决方法：1是降低版本，2是去掉cms配置，但是去掉cms配置后又报下面的错

这里需要在配置文件增加一个这个

--add-opens=java.base/java.lang=ALL-UNNAMED

完整的linux启动脚本如下

# resolve links - $0 may be a softlink
PRG="$0"

while [ -h "$PRG" ]; do
  ls=`ls -ld "$PRG"`
  link=`expr "$ls" : '.*-> \(.*\)$'`
  if expr "$link" : '/.*' > /dev/null; then
    PRG="$link"
  else
    PRG=`dirname "$PRG"`/"$link"
  fi
done

PRGDIR=`dirname "$PRG"`
BASEDIR=`cd "$PRGDIR/.." >/dev/null; pwd`

# Reset the REPO variable. If you need to influence this use the environment setup file.
REPO=


# OS specific support.  $var _must_ be set to either true or false.
cygwin=false;
darwin=false;
case "`uname`" in
  CYGWIN*) cygwin=true ;;
  Darwin*) darwin=true
           if [ -z "$JAVA_VERSION" ] ; then
             JAVA_VERSION="CurrentJDK"
           else
             echo "Using Java version: $JAVA_VERSION"
           fi
		   if [ -z "$JAVA_HOME" ]; then
		      if [ -x "/usr/libexec/java_home" ]; then
			      JAVA_HOME=`/usr/libexec/java_home`
			  else
			      JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Versions/${JAVA_VERSION}/Home
			  fi
           fi       
           ;;
esac

if [ -z "$JAVA_HOME" ] ; then
  if [ -r /etc/gentoo-release ] ; then
    JAVA_HOME=`java-config --jre-home`
  fi
fi

# For Cygwin, ensure paths are in UNIX format before anything is touched
if $cygwin ; then
  [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
  [ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --unix "$CLASSPATH"`
fi

# If a specific java binary isn't specified search for the standard 'java' binary
if [ -z "$JAVACMD" ] ; then
  if [ -n "$JAVA_HOME"  ] ; then
    if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
      # IBM's JDK on AIX uses strange locations for the executables
      JAVACMD="$JAVA_HOME/jre/sh/java"
    else
      JAVACMD="$JAVA_HOME/bin/java"
    fi
  else
    JAVACMD=`which java`
  fi
fi

if [ ! -x "$JAVACMD" ] ; then
  echo "Error: JAVA_HOME is not defined correctly." 1>&2
  echo "  We cannot execute $JAVACMD" 1>&2
  exit 1
fi

if [ -z "$REPO" ]
then
  REPO="$BASEDIR"/lib
fi

CLASSPATH="$BASEDIR"/conf:"$REPO"/*

ENDORSED_DIR=
if [ -n "$ENDORSED_DIR" ] ; then
  CLASSPATH=$BASEDIR/$ENDORSED_DIR/*:$CLASSPATH
fi

if [ -n "$CLASSPATH_PREFIX" ] ; then
  CLASSPATH=$CLASSPATH_PREFIX:$CLASSPATH
fi

# For Cygwin, switch paths to Windows format before running java
if $cygwin; then
  [ -n "$CLASSPATH" ] && CLASSPATH=`cygpath --path --windows "$CLASSPATH"`
  [ -n "$JAVA_HOME" ] && JAVA_HOME=`cygpath --path --windows "$JAVA_HOME"`
  [ -n "$HOME" ] && HOME=`cygpath --path --windows "$HOME"`
  [ -n "$BASEDIR" ] && BASEDIR=`cygpath --path --windows "$BASEDIR"`
  [ -n "$REPO" ] && REPO=`cygpath --path --windows "$REPO"`
fi


exec "$JAVACMD" $JAVA_OPTS -server --add-opens=java.base/java.lang=ALL-UNNAMED -Xmx2048m -Xms2048m -Xmn1024m -Xss512k -XX:SurvivorRatio=10 -XX:MetaspaceSize=128m -XX:MaxMetaspaceSize=256m -XX:MaxDirectMemorySize=1024m -XX:-OmitStackTraceInFastThrow -XX:-UseAdaptiveSizePolicy -XX:+HeapDumpOnOutOfMemoryError -XX:HeapDumpPath="$BASEDIR"/logs/java_heapdump.hprof -XX:+DisableExplicitGC  -Xloggc:"$BASEDIR"/logs/seata_gc.log -verbose:gc -Dio.netty.leakDetectionLevel=advanced -Dlogback.color.disable-for-bat=true \
  -classpath "$CLASSPATH" \
  -Dapp.name="seata-server" \
  -Dapp.pid="$$" \
  -Dapp.repo="$REPO" \
  -Dapp.home="$BASEDIR" \
  -Dbasedir="$BASEDIR" \
  io.seata.server.Server \
  "$@"

启动成功