bootstrap文件夹内容如下图:
在board/sama5d3_xplained目录下,有官方的默认配置文件
sama5d3_xplainednf_linux_uimage_dt_defconfig 从nandflash启动直接跳转到uimage类型内核阶段
sama5d3_xplainednf_linux_zimage_dt_defconfig 从nandflash启动直接跳转到zimage类型内核阶段
sama5d3_xplainednf_uboot_defconfig 从nandflash启动直接跳转到uboot阶段
sama5d3_xplainedsd_linux_uimage_dt_defconfig 从SD卡启动直接跳转到uimage类型内核阶段
sama5d3_xplainedsd_linux_zimage_dt_defconfig 从nandflash启动直接跳转到zimage类型内核阶段
sama5d3_xplainedsd_uboot_defconfig 从nandflash启动直接跳转到uboot阶段
先把默认配置进行编译一轮;从flash启动跳转到uboot阶段。
$ make mrproper
$ make sama5d3_xplainednf_uboot_defconfig
图形化配置,进行裁剪;CPU主频、总线频率,启动晶振选择;