个人记录之8266 3

个人记录，只想赚C
在STM32上将8266工作在AP模式下，初始化服务器
#ifndef __BSP_ESP8266_H
#define __BSP_ESP8266_H

#include “stm32f10x.h”
#include “common.h”
#include <stdio.h>
#include <stdbool.h>

#if defined ( __CC_ARM )
#pragma anon_unions
#endif

/******************************* ESP8266 数据类型定义 ***************************/
typedef enum{
STA,
AP,
STA_AP
} ENUM_Net_ModeTypeDef;

typedef enum{
enumTCP,
enumUDP,
} ENUM_NetPro_TypeDef;

typedef enum{
Multiple_ID_0 = 0,
Multiple_ID_1 = 1,
Multiple_ID_2 = 2,
Multiple_ID_3 = 3,
Multiple_ID_4 = 4,
Single_ID_0 = 5,
} ENUM_ID_NO_TypeDef;

typedef enum{
OPEN = 0,
WEP = 1,
WPA_PSK = 2,
WPA2_PSK = 3,
WPA_WPA2_PSK = 4,
} ENUM_AP_PsdMode_TypeDef;

/******************************* ESP8266 外部全局变量声明 ***************************/
#define RX_BUF_MAX_LEN 1024 //最大接收缓存字节数

extern struct STRUCT_USARTx_Fram //串口数据帧的处理结构体
{
char Data_RX_BUF [ RX_BUF_MAX_LEN ];

union {
__IO u16 InfAll;
struct {
__IO u16 FramLength :15; // 14:0
__IO u16 FramFinishFlag :1; // 15
} InfBit;
};

} strEsp8266_Fram_Record;

/******************************** ESP8266 连接引脚定义 ***********************************/
#define macESP8266_CH_PD_APBxClock_FUN RCC_APB2PeriphClockCmd
#define macESP8266_CH_PD_CLK RCC_APB2Periph_GPIOG
#define macESP8266_CH_PD_PORT GPIOG
#define macESP8266_CH_PD_PIN GPIO_Pin_13

#define macESP8266_RST_APBxClock_FUN RCC_APB2PeriphClockCmd
#define macESP8266_RST_CLK RCC_APB2Periph_GPIOG
#define macESP8266_RST_PORT GPIOG
#define macESP8266_RST_PIN GPIO_Pin_14

#define macESP8266_USART_BAUD_RATE 115200

#define macESP8266_USARTx USART3
#define macESP8266_USART_APBxClock_FUN RCC_APB1PeriphClockCmd
#define macESP8266_USART_CLK RCC_APB1Periph_USART3
#define macESP8266_USART_GPIO_APBxClock_FUN RCC_APB2PeriphClockCmd
#define macESP8266_USART_GPIO_CLK RCC_APB2Periph_GPIOB
#define macESP8266_USART_TX_PORT GPIOB
#define macESP8266_USART_TX_PIN GPIO_Pin_10
#define macESP8266_USART_RX_PORT GPIOB
#define macESP8266_USART_RX_PIN GPIO_Pin_11
#define macESP8266_USART_IRQ USART3_IRQn
#define macESP8266_USART_INT_FUN USART3_IRQHandler

/*********************************************** ESP8266 函数宏定义 *******************************************/
#define macESP8266_Usart( fmt, … ) USART_printf ( macESP8266_USARTx, fmt, ##VA_ARGS )
#define macPC_Usart( fmt, … ) printf ( fmt, ##VA_ARGS )

#define macESP8266_CH_ENABLE() GPIO_SetBits ( macESP8266_CH_PD_PORT, macESP8266_CH_PD_PIN )
#define macESP8266_CH_DISABLE() GPIO_ResetBits ( macESP8266_CH_PD_PORT, macESP8266_CH_PD_PIN )

#define macESP8266_RST_HIGH_LEVEL() GPIO_SetBits ( macESP8266_RST_PORT, macESP8266_RST_PIN )
#define macESP8266_RST_LOW_LEVEL() GPIO_ResetBits ( macESP8266_RST_PORT, macESP8266_RST_PIN )

/****************************************** ESP8266 函数声明 ***********************************************/
void ESP8266_Init ( void );
void ESP8266_Rst ( void );
bool ESP8266_Cmd ( char * cmd, char * reply1, char * reply2, u32 waittime );
void ESP8266_AT_Test ( void );
bool ESP8266_Net_Mode_Choose ( ENUM_Net_ModeTypeDef enumMode );
bool ESP8266_JoinAP ( char * pSSID, char * pPassWord );
bool ESP8266_BuildAP ( char * pSSID, char * pPassWord, ENUM_AP_PsdMode_TypeDef enunPsdMode );
bool ESP8266_Enable_MultipleId ( FunctionalState enumEnUnvarnishTx );
bool ESP8266_Link_Server ( ENUM_NetPro_TypeDef enumE, char * ip, char * ComNum, ENUM_ID_NO_TypeDef id);
bool ESP8266_StartOrShutServer ( FunctionalState enumMode, char * pPortNum, char * pTimeOver );
uint8_t ESP8266_Get_LinkStatus ( void );
uint8_t ESP8266_Get_IdLinkStatus ( void );
uint8_t ESP8266_Inquire_ApIp ( char * pApIp, uint8_t ucArrayLength );
bool ESP8266_UnvarnishSend ( void );
void ESP8266_ExitUnvarnishSend ( void );
bool ESP8266_SendString ( FunctionalState enumEnUnvarnishTx, char * pStr, u32 ulStrLength, ENUM_ID_NO_TypeDef ucId );
char * ESP8266_ReceiveString ( FunctionalState enumEnUnvarnishTx );

uint8_t ESP8266_CWLIF ( char * pStaIp );
uint8_t ESP8266_CIPAP ( char * pApIp );

#endif