EFR32MG21A020 Sleep End Device Joining network failed problem

This problem discription as illustrate in Figure 1 - 0
I‘m in the process of developing a low-power device,the network cannot be added after the device is
restarted.

Figure 1 - 0

The solution to this problem is as follows:
Step 1: Open file named ‘af-name-common.c’.
Step 2: The function named ‘void emAfNetworkInit(void)’ was found.
Step 3: Modify the following code.

    if (initialize) {
//      EmberNetworkInitStruct networkInitStruct = { EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS };
//      emberNetworkInit(&networkInitStruct);
        EmberNetworkInitStruct networkInitStruct = { EMBER_AF_CUSTOM_NETWORK_INIT_OPTIONS };
        networkInitStruct.bitmask &= ~EMBER_NETWORK_INIT_END_DEVICE_REJOIN_ON_REBOOT;
        emberNetworkInit(&networkInitStruct);
    }

Note that,You need to implement a reconnect event yourself to ensure that the device can reconnect to the network if the parent node is lost. use the function ‘emberFindAndRejoinNetwork(true, 0);’