使用Arduino Pro IDE点亮一个LED

最新推荐文章于 2024-08-12 19:23:15 发布

达子666

最新推荐文章于 2024-08-12 19:23:15 发布

阅读量176

点赞数

分类专栏： arduino 文章标签： windows 单片机 mcu

本文链接：https://blog.csdn.net/weixin_46023406/article/details/129902266

版权

arduino 专栏收录该内容

3 篇文章 0 订阅

订阅专栏

该教程指导用户如何下载ArduinoProIDE并使用它来控制板载LED灯进行周期性闪烁。代码示例展示了如何设置pinMode、digitalWrite和delay函数，以实现LED的一秒开/关循环。

摘要由CSDN通过智能技术生成

使用Arduino Pro IDE点亮一个LED

软件下载

Arduino官网
直接点击右上角搜索：
在这里插入图片描述

往下滑找到最终版本：

软件使用

解压后即可使用：
在这里插入图片描述

更换黑色背景：

安装Arduino库：

/*
  Blink

  Turns an LED on for one second, then off for one second, repeatedly.

  Most Arduinos have an on-board LED you can control. On the UNO, MEGA and ZERO
  it is attached to digital pin 13, on MKR1000 on pin 6. LED_BUILTIN is set to
  the correct LED pin independent of which board is used.
  If you want to know what pin the on-board LED is connected to on your Arduino
  model, check the Technical Specs of your board at:
  https://www.arduino.cc/en/Main/Products

  modified 8 May 2014
  by Scott Fitzgerald
  modified 2 Sep 2016
  by Arturo Guadalupi
  modified 8 Sep 2016
  by Colby Newman

  This example code is in the public domain.

  http://www.arduino.cc/en/Tutorial/Blink
*/

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin LED_BUILTIN as an output.
  pinMode(LED_BUILTIN, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(LED_BUILTIN, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);                       // wait for a second
  digitalWrite(LED_BUILTIN, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);                       // wait for a second
}