本章内容主要是在开发板上运行AES128防盗算法，并且通过串口调试助手观测防盗算法加密后的值以及解密后的值，判断防盗算法是否在开发板上正确运行。
1，防盗算法
以下为AES128防盗算法源码：
aes.h文件源码
#ifndef _AES_H_
#define _AES_H_
#include <stdint.h>
// #define the macros below to 1/0 to enable/disable the mode of operation.
//
// CBC enables AES128 encryption in CBC-mode of operation and handles 0-padding.
// ECB enables the basic ECB 16-byte block algorithm. Both can be enabled simultaneously.
// The #ifndef-guard allows it to be configured before #include'ing or at compile time.
#ifndef CBC
#define CBC 1
#endif
#ifndef ECB
#define ECB 1
#endif
#if defined(ECB) && ECB
void AES128_ECB_encrypt(const uint8_t* input, const uint8_t* key, uint8_t *output);
void AES128_ECB_decrypt(const uint8_t* input, const uint8_t* key, uint8_t *output);
#endif // #if defined(ECB) && ECB
#if defined(CBC) && CBC
void AES128_CBC_encrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv);
void AES128_CBC_decrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv);
#endif // #if defined(CBC) && CBC
#endif //_AES_H_
aes.c文件源码
/*
This is an implementation of the AES128 algorithm, specifically ECB and CBC mode.
The implementation is verified against the test vectors in:
National Institute of Standards and Technology Special Publication 800-38A 2001 ED
ECB-AES128
----------
plain-text:
6bc1bee22e409f96e93d7e117393172a
ae2d8a571e03ac9c9eb76fac45af8e51
30c81c46a35ce411e5fbc1191a0a52ef
f69f2445df4f9b17ad2b417be66c3710
key:
2b7e151628aed2a6abf7158809cf4f3c
resulting cipher
3ad77bb40d7a3660a89ecaf32466ef97
f5d3d58503b9699de785895a96fdbaaf
43b1cd7f598ece23881b00e3ed030688
7b0c785e27e8ad3f8223207104725dd4
NOTE: String length must be evenly divisible by 16byte (str_len % 16 == 0)
You should pad the end of the string with zeros if this is not the case.
*/
/*****************************************************************************/
/* Includes: */
/*****************************************************************************/
#include <stdint.h>
#include <string.h> // CBC mode, for memset
#include "aes.h"
/*****************************************************************************/
/* Defines: */
/*****************************************************************************/
// The number of columns comprising a state in AES. This is a constant in AES. Value=4
#define Nb 4
// The number of 32 bit words in a key.
#define Nk 4
// Key length in bytes [128 bit]
#define KEYLEN 16
// The number of rounds in AES Cipher.
#define Nr 10
// jcallan@github points out that declaring Multiply as a function
// reduces code size considerably with the Keil ARM compiler.
// See this link for more information: https://github.com/kokke/tiny-AES128-C/pull/3
#ifndef MULTIPLY_AS_A_FUNCTION
#define MULTIPLY_AS_A_FUNCTION 0
#endif
/*****************************************************************************/
/* Private variables: */
/*****************************************************************************/
// state - array holding the intermediate results during decryption.
typedef uint8_t state_t[4][4];
static state_t* state;
// The array that stores the round keys.
static uint8_t RoundKey[176];
// The Key input to the AES Program
static const uint8_t* Key;
#if defined(CBC) && CBC
// Initial Vector used only for CBC mode
static uint8_t* Iv;
#endif
// The lookup-tables are marked const so they can be placed in read-only storage instead of RAM
// The numbers below can be computed dynamically trading ROM for RAM -
// This can be useful in (embedded) bootloader applications, where ROM is often limited.
static const uint8_t sbox[256] = {
//0 1 2 3 4 5 6 7 8 9 A B C D E F
0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5, 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76,
0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0, 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0,
0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc, 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15,
0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a, 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75,
0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0, 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84,
0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b, 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf,
0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85, 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8,
0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5, 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2,
0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17, 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73,
0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88, 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb,
0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c, 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79,
0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9, 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08,
0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6, 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a,
0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e, 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e,
0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94, 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf,
0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68, 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 };
static const uint8_t rsbox[256] =
{ 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38, 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb,
0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87, 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb,
0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d, 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e,
0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2, 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25,
0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16, 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92,
0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda, 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84,
0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a, 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06,
0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02, 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b,
0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea, 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73,
0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85, 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e,
0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89, 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b,
0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20, 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4,
0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31, 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f,
0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d, 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef,
0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0, 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61,
0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26, 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d };
// The round constant word array, Rcon[i], contains the values given by
// x to th e power (i-1) being powers of x (x is denoted as {02}) in the field GF(2^8)
// Note that i starts at 1, not 0).
static const uint8_t Rcon[255] = {
0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a,
0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39,
0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a,
0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8,
0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef,
0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc,
0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b,
0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3,
0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94,
0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20,
0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63, 0xc6, 0x97, 0x35,
0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd, 0x61, 0xc2, 0x9f,
0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb, 0x8d, 0x01, 0x02, 0x04,
0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36, 0x6c, 0xd8, 0xab, 0x4d, 0x9a, 0x2f, 0x5e, 0xbc, 0x63,
0xc6, 0x97, 0x35, 0x6a, 0xd4, 0xb3, 0x7d, 0xfa, 0xef, 0xc5, 0x91, 0x39, 0x72, 0xe4, 0xd3, 0xbd,
0x61, 0xc2, 0x9f, 0x25, 0x4a, 0x94, 0x33, 0x66, 0xcc, 0x83, 0x1d, 0x3a, 0x74, 0xe8, 0xcb };
/*****************************************************************************/
/* Private functions: */
/*****************************************************************************/
static uint8_t getSBoxValue(uint8_t num)
{
return sbox[num];
}
static uint8_t getSBoxInvert(uint8_t num)
{
return rsbox[num];
}
// This function produces Nb(Nr+1) round keys. The round keys are used in each round to decrypt the states.
static void KeyExpansion(void)
{
uint32_t i, j, k;
uint8_t tempa[4]; // Used for the column/row operations
// The first round key is the key itself.
for(i = 0; i < Nk; ++i)
{
RoundKey[(i * 4) + 0] = Key[(i * 4) + 0];
RoundKey[(i * 4) + 1] = Key[(i * 4) + 1];
RoundKey[(i * 4) + 2] = Key[(i * 4) + 2];
RoundKey[(i * 4) + 3] = Key[(i * 4) + 3];
}
// All other round keys are found from the previous round keys.
for(; (i < (Nb * (Nr + 1))); ++i)
{
for(j = 0; j < 4; ++j)
{
tempa[j]=RoundKey[(i-1) * 4 + j];
}
if (i % Nk == 0)
{
// This function rotates the 4 bytes in a word to the left once.
// [a0,a1,a2,a3] becomes [a1,a2,a3,a0]
// Function RotWord()
{
k = tempa[0];
tempa[0] = tempa[1];
tempa[1] = tempa[2];
tempa[2] = tempa[3];
tempa[3] = k;
}
// SubWord() is a function that takes a four-byte input word and
// applies the S-box to each of the four bytes to produce an output word.
// Function Subword()
{
tempa[0] = getSBoxValue(tempa[0]);
tempa[1] = getSBoxValue(tempa[1]);
tempa[2] = getSBoxValue(tempa[2]);
tempa[3] = getSBoxValue(tempa[3]);
}
tempa[0] = tempa[0] ^ Rcon[i/Nk];
}
else if (Nk > 6 && i % Nk == 4)
{
// Function Subword()
{
tempa[0] = getSBoxValue(tempa[0]);
tempa[1] = getSBoxValue(tempa[1]);
tempa[2] = getSBoxValue(tempa[2]);
tempa[3] = getSBoxValue(tempa[3]);
}
}
RoundKey[i * 4 + 0] = RoundKey[(i - Nk) * 4 + 0] ^ tempa[0];
RoundKey[i * 4 + 1] = RoundKey[(i - Nk) * 4 + 1] ^ tempa[1];
RoundKey[i * 4 + 2] = RoundKey[(i - Nk) * 4 + 2] ^ tempa[2];
RoundKey[i * 4 + 3] = RoundKey[(i - Nk) * 4 + 3] ^ tempa[3];
}
}
// This function adds the round key to state.
// The round key is added to the state by an XOR function.
static void AddRoundKey(uint8_t round)
{
uint8_t i,j;
for(i=0;i<4;++i)
{
for(j = 0; j < 4; ++j)
{
(*state)[i][j] ^= RoundKey[round * Nb * 4 + i * Nb + j];
}
}
}
// The SubBytes Function Substitutes the values in the
// state matrix with values in an S-box.
static void SubBytes(void)
{
uint8_t i, j;
for(i = 0; i < 4; ++i)
{
for(j = 0; j < 4; ++j)
{
(*state)[j][i] = getSBoxValue((*state)[j][i]);
}
}
}
// The ShiftRows() function shifts the rows in the state to the left.
// Each row is shifted with different offset.
// Offset = Row number. So the first row is not shifted.
static void ShiftRows(void)
{
uint8_t temp;
// Rotate first row 1 columns to left
temp = (*state)[0][1];
(*state)[0][1] = (*state)[1][1];
(*state)[1][1] = (*state)[2][1];
(*state)[2][1] = (*state)[3][1];
(*state)[3][1] = temp;
// Rotate second row 2 columns to left
temp = (*state)[0][2];
(*state)[0][2] = (*state)[2][2];
(*state)[2][2] = temp;
temp = (*state)[1][2];
(*state)[1][2] = (*state)[3][2];
(*state)[3][2] = temp;
// Rotate third row 3 columns to left
temp = (*state)[0][3];
(*state)[0][3] = (*state)[3][3];
(*state)[3][3] = (*state)[2][3];
(*state)[2][3] = (*state)[1][3];
(*state)[1][3] = temp;
}
static uint8_t xtime(uint8_t x)
{
return ((x<<1) ^ (((x>>7) & 1) * 0x1b));
}
// MixColumns function mixes the columns of the state matrix
static void MixColumns(void)
{
uint8_t i;
uint8_t Tmp,Tm,t;
for(i = 0; i < 4; ++i)
{
t = (*state)[i][0];
Tmp = (*state)[i][0] ^ (*state)[i][1] ^ (*state)[i][2] ^ (*state)[i][3] ;
Tm = (*state)[i][0] ^ (*state)[i][1] ; Tm = xtime(Tm); (*state)[i][0] ^= Tm ^ Tmp ;
Tm = (*state)[i][1] ^ (*state)[i][2] ; Tm = xtime(Tm); (*state)[i][1] ^= Tm ^ Tmp ;
Tm = (*state)[i][2] ^ (*state)[i][3] ; Tm = xtime(Tm); (*state)[i][2] ^= Tm ^ Tmp ;
Tm = (*state)[i][3] ^ t ; Tm = xtime(Tm); (*state)[i][3] ^= Tm ^ Tmp ;
}
}
// Multiply is used to multiply numbers in the field GF(2^8)
#if MULTIPLY_AS_A_FUNCTION
static uint8_t Multiply(uint8_t x, uint8_t y)
{
return (((y & 1) * x) ^
((y>>1 & 1) * xtime(x)) ^
((y>>2 & 1) * xtime(xtime(x))) ^
((y>>3 & 1) * xtime(xtime(xtime(x)))) ^
((y>>4 & 1) * xtime(xtime(xtime(xtime(x))))));
}
#else
#define Multiply(x, y) \
( ((y & 1) * x) ^ \
((y>>1 & 1) * xtime(x)) ^ \
((y>>2 & 1) * xtime(xtime(x))) ^ \
((y>>3 & 1) * xtime(xtime(xtime(x)))) ^ \
((y>>4 & 1) * xtime(xtime(xtime(xtime(x)))))) \
#endif
// MixColumns function mixes the columns of the state matrix.
// The method used to multiply may be difficult to understand for the inexperienced.
// Please use the references to gain more information.
static void InvMixColumns(void)
{
int i;
uint8_t a,b,c,d;
for(i=0;i<4;++i)
{
a = (*state)[i][0];
b = (*state)[i][1];
c = (*state)[i][2];
d = (*state)[i][3];
(*state)[i][0] = Multiply(a, 0x0e) ^ Multiply(b, 0x0b) ^ Multiply(c, 0x0d) ^ Multiply(d, 0x09);
(*state)[i][1] = Multiply(a, 0x09) ^ Multiply(b, 0x0e) ^ Multiply(c, 0x0b) ^ Multiply(d, 0x0d);
(*state)[i][2] = Multiply(a, 0x0d) ^ Multiply(b, 0x09) ^ Multiply(c, 0x0e) ^ Multiply(d, 0x0b);
(*state)[i][3] = Multiply(a, 0x0b) ^ Multiply(b, 0x0d) ^ Multiply(c, 0x09) ^ Multiply(d, 0x0e);
}
}
// The SubBytes Function Substitutes the values in the
// state matrix with values in an S-box.
static void InvSubBytes(void)
{
uint8_t i,j;
for(i=0;i<4;++i)
{
for(j=0;j<4;++j)
{
(*state)[j][i] = getSBoxInvert((*state)[j][i]);
}
}
}
static void InvShiftRows(void)
{
uint8_t temp;
// Rotate first row 1 columns to right
temp=(*state)[3][1];
(*state)[3][1]=(*state)[2][1];
(*state)[2][1]=(*state)[1][1];
(*state)[1][1]=(*state)[0][1];
(*state)[0][1]=temp;
// Rotate second row 2 columns to right
temp=(*state)[0][2];
(*state)[0][2]=(*state)[2][2];
(*state)[2][2]=temp;
temp=(*state)[1][2];
(*state)[1][2]=(*state)[3][2];
(*state)[3][2]=temp;
// Rotate third row 3 columns to right
temp=(*state)[0][3];
(*state)[0][3]=(*state)[1][3];
(*state)[1][3]=(*state)[2][3];
(*state)[2][3]=(*state)[3][3];
(*state)[3][3]=temp;
}
// Cipher is the main function that encrypts the PlainText.
static void Cipher(void)
{
uint8_t round = 0;
// Add the First round key to the state before starting the rounds.
AddRoundKey(0);
// There will be Nr rounds.
// The first Nr-1 rounds are identical.
// These Nr-1 rounds are executed in the loop below.
for(round = 1; round < Nr; ++round)
{
SubBytes();
ShiftRows();
MixColumns();
AddRoundKey(round);
}
// The last round is given below.
// The MixColumns function is not here in the last round.
SubBytes();
ShiftRows();
AddRoundKey(Nr);
}
static void InvCipher(void)
{
uint8_t round=0;
// Add the First round key to the state before starting the rounds.
AddRoundKey(Nr);
// There will be Nr rounds.
// The first Nr-1 rounds are identical.
// These Nr-1 rounds are executed in the loop below.
for(round=Nr-1;round>0;round--)
{
InvShiftRows();
InvSubBytes();
AddRoundKey(round);
InvMixColumns();
}
// The last round is given below.
// The MixColumns function is not here in the last round.
InvShiftRows();
InvSubBytes();
AddRoundKey(0);
}
static void BlockCopy(uint8_t* output, const uint8_t* input)
{
uint8_t i;
for (i=0;i<KEYLEN;++i)
{
output[i] = input[i];
}
}
/*****************************************************************************/
/* Public functions: */
/*****************************************************************************/
#if defined(ECB) && ECB
void AES128_ECB_encrypt(const uint8_t* input, const uint8_t* key, uint8_t* output)
{
// Copy input to output, and work in-memory on output
BlockCopy(output, input);
state = (state_t*)output;
Key = key;
KeyExpansion();
// The next function call encrypts the PlainText with the Key using AES algorithm.
Cipher();
}
void AES128_ECB_decrypt(const uint8_t* input, const uint8_t* key, uint8_t *output)
{
// Copy input to output, and work in-memory on output
BlockCopy(output, input);
state = (state_t*)output;
// The KeyExpansion routine must be called before encryption.
Key = key;
KeyExpansion();
InvCipher();
}
#endif // #if defined(ECB) && ECB
#if defined(CBC) && CBC
static void XorWithIv(uint8_t* buf)
{
uint8_t i;
for(i = 0; i < KEYLEN; ++i)
{
buf[i] ^= Iv[i];
}
}
void AES128_CBC_encrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
{
uintptr_t i;
uint8_t remainders = length % KEYLEN; /* Remaining bytes in the last non-full block */
BlockCopy(output, input);
state = (state_t*)output;
// Skip the key expansion if key is passed as 0
if(0 != key)
{
Key = key;
KeyExpansion();
}
if(iv != 0)
{
Iv = (uint8_t*)iv;
}
for(i = 0; i < length; i += KEYLEN)
{
XorWithIv(input);
BlockCopy(output, input);
state = (state_t*)output;
Cipher();
Iv = output;
input += KEYLEN;
output += KEYLEN;
}
if(remainders)
{
BlockCopy(output, input);
memset(output + remainders, 0, KEYLEN - remainders); /* add 0-padding */
state = (state_t*)output;
Cipher();
}
}
void AES128_CBC_decrypt_buffer(uint8_t* output, uint8_t* input, uint32_t length, const uint8_t* key, const uint8_t* iv)
{
uintptr_t i;
uint8_t remainders = length % KEYLEN; /* Remaining bytes in the last non-full block */
BlockCopy(output, input);
state = (state_t*)output;
// Skip the key expansion if key is passed as 0
if(0 != key)
{
Key = key;
KeyExpansion();
}
// If iv is passed as 0, we continue to encrypt without re-setting the Iv
if(iv != 0)
{
Iv = (uint8_t*)iv;
}
for(i = 0; i < length; i += KEYLEN)
{
BlockCopy(output, input);
state = (state_t*)output;
InvCipher();
XorWithIv(output);
Iv = input;
input += KEYLEN;
output += KEYLEN;
}
if(remainders)
{
BlockCopy(output, input);
memset(output+remainders, 0, KEYLEN - remainders); /* add 0-padding */
state = (state_t*)output;
InvCipher();
}
}
#endif // #if defined(CBC) && CBC
2，串口相关代码
usart.h源码
#ifndef __USART_H__
#define __USART_H__
#include "stm32f10x.h"
void sendchar (int ch);
void myprintf(char *buf);
void uart_send_byte(unsigned char d);
void USART1_InitConfig(uint32_t BaudRate);
#endif
usart.c源码
//#include "..\APP\includes.h"
//#include "include.h"
/**************************************************************************************
* 变量原型:
* 变量说明:
**************************************************************************************/
/**************************************************************************************
* 函数原型:
* 函数功能:
* 输入参数:
* 输出参数:
* 函数说明:
**************************************************************************************/
#include "usart.h"
#include <stdio.h>
#ifdef __GNUC__
/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
set to 'Yes') calls __io_putchar() */
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */
/*******************************************************************************
* Function Name : PUTCHAR_PROTOTYPE
* Description : Retargets the C library printf function to the USART.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
PUTCHAR_PROTOTYPE
{
while (!(USART1->SR & USART_FLAG_TXE));
USART1->DR = (ch & 0x1FF);
return ch;
}
void uart_send_byte(unsigned char d)
{
/* 发送一个字节数据到USART1 */
USART_SendData(USART1, (uint8_t)d);
/* 等待发送完毕 */
while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET);
}
void USART1_InitConfig(uint32_t BaudRate)
{
USART_InitTypeDef USART_InitStructure;
USART_InitStructure.USART_BaudRate = BaudRate;
USART_InitStructure.USART_WordLength = USART_WordLength_8b;
USART_InitStructure.USART_StopBits = USART_StopBits_1;
USART_InitStructure.USART_Parity = USART_Parity_No;
USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
/* Configure USART1 */
USART_Init(USART1, &USART_InitStructure);
/* Enable USART1 Receive and Transmit interrupts */
/* Enable the USART1 */
USART_Cmd(USART1, ENABLE);//仿真看到执行这里，TC标志居然被设置为1了，不知道实际在flash中运行是否是这样
}
3，BSP相关文件
板级支持包
bsp.h源码
#if !defined( _BSP_H )
#define _BSP_H
#include "stm32f10x.h"
#include "cpu.h"
#include "os_cpu.h"
#include "usart.h"
void RCC_Configuration(void);
void GPIO_Configuration(void);
void NVIC_Configuration(void);
CPU_INT32U BSP_CPU_ClkFreq (void);
INT32U OS_CPU_SysTickClkFreq (void);
void BSP_Init(void);
#ifdef DEBUG
void assert_failed(u8* file, u32 line)
#endif
/*
*********************************************************************************************************
* INT DEFINES
*********************************************************************************************************
*/
#define BSP_INT_ID_WWDG 0 /* Window WatchDog Interrupt */
#define BSP_INT_ID_PVD 1 /* PVD through EXTI Line detection Interrupt */
#define BSP_INT_ID_TAMPER 2 /* Tamper Interrupt */
#define BSP_INT_ID_RTC 3 /* RTC global Interrupt */
#define BSP_INT_ID_FLASH 4 /* FLASH global Interrupt */
#define BSP_INT_ID_RCC 5 /* RCC global Interrupt */
#define BSP_INT_ID_EXTI0 6 /* EXTI Line0 Interrupt */
#define BSP_INT_ID_EXTI1 7 /* EXTI Line1 Interrupt */
#define BSP_INT_ID_EXTI2 8 /* EXTI Line2 Interrupt */
#define BSP_INT_ID_EXTI3 9 /* EXTI Line3 Interrupt */
#define BSP_INT_ID_EXTI4 10 /* EXTI Line4 Interrupt */
#define BSP_INT_ID_DMA1_CH1 11 /* DMA1 Channel 1 global Interrupt */
#define BSP_INT_ID_DMA1_CH2 12 /* DMA1 Channel 2 global Interrupt */
#define BSP_INT_ID_DMA1_CH3 13 /* DMA1 Channel 3 global Interrupt */
#define BSP_INT_ID_DMA1_CH4 14 /* DMA1 Channel 4 global Interrupt */
#define BSP_INT_ID_DMA1_CH5 15 /* DMA1 Channel 5 global Interrupt */
#define BSP_INT_ID_DMA1_CH6 16 /* DMA1 Channel 6 global Interrupt */
#define BSP_INT_ID_DMA1_CH7 17 /* DMA1 Channel 7 global Interrupt */
#define BSP_INT_ID_ADC1_2 18 /* ADC1 et ADC2 global Interrupt */
#define BSP_INT_ID_USB_HP_CAN_TX 19 /* USB High Priority or CAN TX Interrupts */
#define BSP_INT_ID_USB_LP_CAN_RX0 20 /* USB Low Priority or CAN RX0 Interrupts */
#define BSP_INT_ID_CAN_RX1 21 /* CAN RX1 Interrupt */
#define BSP_INT_ID_CAN_SCE 22 /* CAN SCE Interrupt */
#define BSP_INT_ID_EXTI9_5 23 /* External Line[9:5] Interrupts */
#define BSP_INT_ID_TIM1_BRK 24 /* TIM1 Break Interrupt */
#define BSP_INT_ID_TIM1_UP 25 /* TIM1 Update Interrupt */
#define BSP_INT_ID_TIM1_TRG_COM 26 /* TIM1 Trigger and Commutation Interrupt */
#define BSP_INT_ID_TIM1_CC 27 /* TIM1 Capture Compare Interrupt */
#define BSP_INT_ID_TIM2 28 /* TIM2 global Interrupt */
#define BSP_INT_ID_TIM3 29 /* TIM3 global Interrupt */
#define BSP_INT_ID_TIM4 30 /* TIM4 global Interrupt */
#define BSP_INT_ID_I2C1_EV 31 /* I2C1 Event Interrupt */
#define BSP_INT_ID_I2C1_ER 32 /* I2C1 Error Interrupt */
#define BSP_INT_ID_I2C2_EV 33 /* I2C2 Event Interrupt */
#define BSP_INT_ID_I2C2_ER 34 /* I2C2 Error Interrupt */
#define BSP_INT_ID_SPI1 35 /* SPI1 global Interrupt */
#define BSP_INT_ID_SPI2 36 /* SPI2 global Interrupt */
#define BSP_INT_ID_USART1 37 /* USART1 global Interrupt */
#define BSP_INT_ID_USART2 38 /* USART2 global Interrupt */
#define BSP_INT_ID_USART3 39 /* USART3 global Interrupt */
#define BSP_INT_ID_EXTI15_10 40 /* External Line[15:10] Interrupts */
#define BSP_INT_ID_RTCAlarm 41 /* RTC Alarm through EXTI Line Interrupt */
#define BSP_INT_ID_USBWakeUp 42 /* USB WakeUp from suspend through EXTI Line Interrupt */
#define BSP_INT_ID_TIM8_BRK 43 /* TIM8 Break Interrupt */
#define BSP_INT_ID_TIM8_UP 44 /* TIM8 Update Interrupt */
#define BSP_INT_ID_TIM8_TRG_COM 45 /* TIM8 Trigger and Commutation Interrupt */
#define BSP_INT_ID_TIM8_CC 46 /* TIM8 Capture Compare Interrupt */
#define BSP_INT_ID_ADC3 47 /* ADC3 global Interrupt */
#define BSP_INT_ID_FSMC 48 /* FSMC global Interrupt */
#define BSP_INT_ID_SDIO 49 /* SDIO global Interrupt */
#define BSP_INT_ID_TIM5 50 /* TIM5 global Interrupt */
#define BSP_INT_ID_SPI3 51 /* SPI3 global Interrupt */
#define BSP_INT_ID_UART4 52 /* UART4 global Interrupt */
#define BSP_INT_ID_UART5 53 /* UART5 global Interrupt */
#define BSP_INT_ID_TIM6 54 /* TIM6 global Interrupt */
#define BSP_INT_ID_TIM7 55 /* TIM7 global Interrupt */
#define BSP_INT_ID_DMA2_CH1 56 /* DMA2 Channel 1 global Interrupt */
#define BSP_INT_ID_DMA2_CH2 57 /* DMA2 Channel 2 global Interrupt */
#define BSP_INT_ID_DMA2_CH3 58 /* DMA2 Channel 3 global Interrupt */
#define BSP_INT_ID_DMA2_CH4_5 59 /* DMA2 Channel 4 and DMA2 Channel 5 global Interrupt */
#endif
bsp.c源码
//#include "..\App\includes.h"
#include "bsp.h"
/*
*********************************************************************************************************
QQ: 958664258
21IC用户名：banhushui
交流平台：http://blog.21ic.com/user1/5817/index.html
淘宝店铺：http://shop58559908.taobao.com
旺旺：半壶水电子
编译器版本：MDK3.5
硬件平台：BHS-STM32--->
http://item.taobao.com/auction/item_detail-db2-a29ff4d34829cbddeffe864fc1741d21.jhtml
*********************************************************************************************************
*/
/*******************************************************************************
* Function Name : RCC_Configuration
* Description : Configures the different system clocks.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void RCC_Configuration(void)
{
RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA |
RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO |
RCC_APB2Periph_USART1, ENABLE);
}
/*******************************************************************************
* Function Name : GPIO_Configuration
* Description : Configures the different GPIO ports.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void GPIO_Configuration(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_All;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
GPIO_Init(GPIOB, &GPIO_InitStructure);
GPIO_WriteBit(GPIOB, GPIO_Pin_8, (BitAction)1);
//usart_init----------------------------------------------------
/* Configure USART1 Rx (PA.10) as input floating */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOA, &GPIO_InitStructure);
/* Configure USART1 Tx (PA.09) as alternate function push-pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
GPIO_Init(GPIOA, &GPIO_InitStructure);
}
/*******************************************************************************
* Function Name : NVIC_Configuration
* Description : Configures Vector Table base location.
* Input : None
* Output : None
* Return : None
*******************************************************************************/
void NVIC_Configuration(void)
{
#if defined (VECT_TAB_RAM)
/* Set the Vector Table base location at 0x20000000 */
NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
#elif defined(VECT_TAB_FLASH_IAP)
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x2000);
#else /* VECT_TAB_FLASH */
/* Set the Vector Table base location at 0x08000000 */
NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
#endif
/* Configure the NVIC Preemption Priority Bits */
NVIC_PriorityGroupConfig(NVIC_PriorityGroup_0);
}
void BSP_Init(void)
{
/* System Clocks Configuration */
RCC_Configuration();
GPIO_Configuration();
/* NVIC configuration */
NVIC_Configuration();
USART1_InitConfig(9600);
}
CPU_INT32U BSP_CPU_ClkFreq (void)
{
RCC_ClocksTypeDef rcc_clocks;
RCC_GetClocksFreq(&rcc_clocks);
return ((CPU_INT32U)rcc_clocks.HCLK_Frequency);
}
INT32U OS_CPU_SysTickClkFreq (void)
{
INT32U freq;
freq = BSP_CPU_ClkFreq();
return (freq);
}
#ifdef DEBUG
/*******************************************************************************
* Function Name : assert_failed
* Description : Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* Input : - file: pointer to the source file name
* - line: assert_param error line source number
* Output : None
* Return : None
*******************************************************************************/
void assert_failed(u8* file, u32 line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
4，main文件
#include <stdio.h>
#include <stdlib.h>
#include "stm32f10x.h"
#include "aes.h"
#include "bsp.h"
int main()
{
uint8_t i = 0;
BSP_Init();
uint8_t input[16] = {2};
for(i=0;i<16;i++)
{
input[i] = rand()%10;
}
for(i=0;i<16;i++)
{
printf("input[%d] = %d\r\n",i,input[i]);
}
printf("\r\n");
uint8_t output[16] = {5};
uint8_t length = 7;
const uint8_t key[16] = {2};
const uint8_t iv[16] = {3};
// for(i=0;i<16;i++)
// {
// printf("output[%d] = %d\r\n",i,output[i]);
// }
//
// printf("\r\n");
AES128_CBC_encrypt_buffer(output, input, length, key, iv);
for(i=0;i<16;i++)
{
printf("output[%d] = %d\r\n",i,output[i]);
}
printf("\r\n");
uint8_t decrypt[16] = {0};
AES128_CBC_decrypt_buffer(decrypt, output, length, key, iv);
for(i=0;i<16;i++)
{
printf("decrypt[%d] = %d\r\n",i,decrypt[i]);
}
while(1)
return 0;
}
1894
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
