两个在基本使用方面无太大区别,但是在spi nand 中有缓存器,需要使用13H命令读取页数据到缓存区,在使用其他读写命令进行操作,所以要注意页的读取和字节读取
1.
13h – PAGE READ to cache
2.
0Fh – GET FEATURE command to the read status until OIP status bit is changed from 1 to 0
3.
30h – READ PAGE CACHE RANDOM command to transfer data from data register to cache register and kick off the next page
transfer from array to data register
4.
0Fh – GET FEATURE command to read the status until OIP status bit is changed from 1 to 0
5.
03h, 0Bh, 3Bh, 6Bh, BBh, or EBh – READ FROM CACHE TO OUTPUT command
6.
0Fh – GET FEATURE command to read the status until CRBSY = 0
7.
Repeat step 3 to step 6 to read out all expected pages until last page
8.
3Fh – READ PAGE CACHE LAST command to end the read page cache sequence and copy a last page from the data register
to the cache register
9.
0Fh – GET FEATURE command to read the status until OIP status bit is changed from 1 to 0
10. 03h, 0Bh, 3Bh, 6Bh, BBh, or EBh – READ FROM CACHE TO OUTPUT command to read out last page from cache register to
output