STM32F10X/GD32F10X芯片配置PA8引脚LED为PWM输出50%占空比波形

void TIM1_PWM_Init(u16 arr,u16 psc) //PWM频率=72000MHZ/(arr+1)
{ 
   GPIO_InitTypeDef GPIO_InitStructure; 
   TIM_TimeBaseInitTypeDef TIM_TimeBaseStructure; 
   TIM_OCInitTypeDef TIM_OCInitStructure; 

   //使能 GPIO 外设时钟使能 
   RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE);// 使能 tim1 时钟 
   RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA , ENABLE);
   
   //设置该引脚为复用输出功能,输出 TIM1 CH1 的 PWM 脉冲波形 
   GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8; //TIM_CH1 
   GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; //复用推挽输出 
   GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 
   GPIO_Init(GPIOA, &GPIO_InitStructure); 
   
   TIM_TimeBaseStructure.TIM_Period = arr;
  //设置在下一个更新事件装入活动的自动重装载寄存器周期的值 80K 
   TIM_TimeBaseStructure.TIM_Prescaler =psc; // 0x00; /* TIM1CLK = 72 MHz */
  //设置用来作为 TIMx 时钟频率除数的预分频值 不分频 
   TIM_TimeBaseStructure.TIM_ClockDivision = 0; //设置时钟分割:TDTS = Tck_tim 
   TIM_TimeBaseStructure.TIM_CounterMode = TIM_CounterMode_Up; //向上计数 
   TIM_TimeBaseInit(TIM1, &TIM_TimeBaseStructure); //初始化 TIMx 
   TIM_OCInitStructure.TIM_OCMode = TIM_OCMode_PWM2; //脉宽调制模式 2 
   TIM_OCInitStructure.TIM_OutputState = TIM_OutputState_Enable; //比较输出使能 
   TIM_OCInitStructure.TIM_Pulse = 0; //设置待装入捕获比较寄存器的脉冲值 
   TIM_OCInitStructure.TIM_OCPolarity = TIM_OCPolarity_High; //输出极性高 
   TIM_OC1Init(TIM1, &TIM_OCInitStructure); //初始化外设 TIMx 
   
   TIM_CtrlPWMOutputs(TIM1,ENABLE); //MOE 主输出使能 
   
   TIM_OC1PreloadConfig(TIM1, TIM_OCPreload_Enable); //CH1 预装载使能 
   
   TIM_ARRPreloadConfig(TIM1, ENABLE); //使能 TIMx 在 ARR 上的预装载寄存器 
   
   TIM_Cmd(TIM1, ENABLE); //使能 TIM1 
 
}
void PWM_LED_Bright(void)
{
//  for (int i = 0; i <= 1000; ++i) //渐变效果
//  {
      TIM_SetCompare1(TIM1, 12000);//根据需求调整波形占空比
//  }
}

int main()

{

TIM1_PWM_Init(24000,0);//PWM输出LED

while(1){

        PWM_LED_Bright();

}

return 0;

}