INA219相关问题

理工科的忧伤

已于 2022-11-03 19:22:20 修改

阅读量648

点赞数 1

分类专栏： tft 文章标签： ina219

于 2022-10-19 16:44:40 首次发布

本文链接：https://blog.csdn.net/weixin_51397215/article/details/127411197

版权

tft 专栏收录该内容

10 篇文章 0 订阅

订阅专栏

文章目录

1.datasheet

datasheet

2.好用的代码

用的这个库在arduino IDE的库管理搜索就行
在这里插入图片描述

其中换INA219地址可以用这个语句

INA219 monitor(INA219::I2C_ADDR_40);

/**********************************************
* INA219 library example
* 10 May 2012 by johngineer
*
* 9 January 2016 Flavius Bindea: changed default values and begin()
*
* this code is public domain.
**********************************************/


#include <Wire.h>
#include <INA219.h>



INA219 monitor;
 


void setup()
{
  Serial.begin(9600);
  monitor.begin();
  // begin calls:
  // configure() with default values RANGE_32V, GAIN_8_320MV, ADC_12BIT, ADC_12BIT, CONT_SH_BUS
  // calibrate() with default values D_SHUNT=0.1, D_V_BUS_MAX=32, D_V_SHUNT_MAX=0.2, D_I_MAX_EXPECTED=2
  // in order to work directly with ADAFruit's INA219B breakout
}

void loop()
{

  Serial.println("******************");
  
 // Serial.print("raw shunt voltage: ");
 // Serial.println(monitor.shuntVoltageRaw());
  
 // Serial.print("raw bus voltage:   ");
 // Serial.println(monitor.busVoltageRaw());
  
 // Serial.println("--");
  
 // Serial.print("shunt voltage: ");
 // Serial.print(monitor.shuntVoltage() * 1000, 4);
 // Serial.println(" mV");
   

   float current=0;
   for(int t=1;t<11;t++)
   {
     current+=monitor.shuntCurrent() *1000;
    // Serial.print(monitor.shuntCurrent() * 1000, 4);
     delay(10);
   }

  Serial.println("shunt current: ");
 Serial.println(current/10, 4);
   Serial.println("            : ");
 Serial.print(monitor.shuntCurrent() * 1000, 4);
  Serial.println(" mA");
  
 // Serial.print("bus voltage:   ");
 // Serial.print(monitor.busVoltage(), 4);
 // Serial.println(" V");
  
 // Serial.print("bus power:     ");
  //Serial.print(monitor.busPower() * 1000, 4);
  //Serial.println(" mW");
  
  Serial.println(" ");
  Serial.println(" ");  Serial.println(" ");
  Serial.println(" ");
  
  delay(1000);

}
//累加100次求平均值
uint32_t get_ave1(uint8_t times )
{
   
     uint32_t sum = 0;
int t=0;
  for( t=0;t<times;t++)
    {
    sum += monitor.shuntCurrent() ;           //读取ADC数据
        delay(10);
    }
    
    return sum/times;
}