HCIP MGRE环境下的OSPF协议

拓扑结构图

 

1、IP地址命令配置:
r1:
[r1]inter g0/0/0
[r1-GigabitEthernet0/0/0]ip add 16.0.0.1 24
[r1-GigabitEthernet0/0/0]inter g0/0/1
[r1-GigabitEthernet0/0/1]ip add 116.0.0.1 24

r2:
[r2]inter g0/0/0
[r2-GigabitEthernet0/0/0]ip add 26.0.0.1 24

r3:
[r3]inter g0/0/0
[r3-GigabitEthernet0/0/0]ip add 36.0.0.1 24

r4:
[r4]inter g0/0/0
[r4-GigabitEthernet0/0/0]ip add 46.0.0.1 24

r5:
[r5]inter g0/0/0
[r5-GigabitEthernet0/0/0]ip add 56.0.0.1 24

r6:
[Huawei]sys isp
[isp]inter g0/0/0
[isp-GigabitEthernet0/0/0]ip add 16.0.0.2 24
[isp-GigabitEthernet0/0/0]inter g0/0/1
[isp-GigabitEthernet0/0/1]ip add 116.0.0.2 24
[isp-GigabitEthernet0/0/1]inter g0/0/2
[isp-GigabitEthernet0/0/2]ip add 56.0.0.2 24
[isp-GigabitEthernet0/0/2]inter g4/0/0
[isp-GigabitEthernet4/0/0]ip add 46.0.0.2 24
[isp-GigabitEthernet4/0/0]inter g3/0/0
[isp-GigabitEthernet3/0/0]ip add 36.0.0.2 24
[isp-GigabitEthernet3/0/0]inter g2/0/0
[isp-GigabitEthernet2/0/0]ip add 26.0.0.2 24

2、配置缺省路由

r1:
[r1]ip route-static 0.0.0.0 0 16.0.0.2
[r1]ip route-static 0.0.0.0 0 116.0.0.2

r2:
[r2]ip route-static 0.0.0.0 0 26.0.0.2

r3:
[r3]ip route-static 0.0.0.0 0 36.0.0.2

r4:
[r4]ip route-static 0.0.0.0 0 46.0.0.2

r5:
[r5]ip route-static 0.0.0.0 0 56.0.0.2

3、R1/R2/R3为星型MGRE

R1:
[r1]inter t0/0/1
[r1-Tunnel0/0/1]ip add 192.168.7.1 24
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]source 116.0.0.1
[r1-Tunnel0/0/1]nhrp network-id 111
[r1-Tunnel0/0/1]nhrp entry multicast dynamic

R2:
[r2]inter t0/0/1
[r2-Tunnel0/0/1]ip add 192.168.7.2 24
[r2-Tunnel0/0/1]tunnel-protocol gre p2mp
[r2-Tunnel0/0/1]source GigabitEthernet 0/0/0
[r2-Tunnel0/0/1]nhrp network-id 111
[r2-Tunnel0/0/1]nhrp entry 192.168.7.1 116.0.0.1 register

R3:
[r3]inter t0/0/1
[r3-Tunnel0/0/1]ip add 192.168.7.3 24
[r3-Tunnel0/0/1]tunnel-protocol gre p2mp
[r3-Tunnel0/0/1]source GigabitEthernet 0/0/0
[r3-Tunnel0/0/1]nhrp network-id 111
[r3-Tunnel0/0/1]nhrp entry 192.168.7.1 116.0.0.1 register

4、R1/R4/R5为全连MGRE

r1:
建立隧道,给隧道接口配置IP地址:
[r1]int t0/0/0
[r1-Tunnel0/0/0]ip add 192.168.6.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp
[r1-Tunnel0/0/0]source 16.0.0.1
[r1-Tunnel0/0/0]nhrp network-id 100
[r1-Tunnel0/0/0]nhrp entry multicast dynamic
[r1-Tunnel0/0/0]nhrp entry 192.168.6.2 46.0.0.1 register
[r1-Tunnel0/0/0]nhrp entry 192.168.6.3 56.0.0.1 register


r4:
[r4]inter t 0/0/0
[r4-Tunnel0/0/0]ip add 192.168.6.2 24
[r4-Tunnel0/0/0]tunnel-protocol gre p2mp
[r4-Tunnel0/0/0]source 46.0.0.1
[r4-Tunnel0/0/0]nhrp network-id 100
[r4-Tunnel0/0/0]nhrp entry multicast dynamic
[r4-Tunnel0/0/0]nhrp entry 192.168.6.1 16.0.0.1 register
[r4-Tunnel0/0/0]nhrp entry 192.168.6.3 56.0.0.1 register

r5:
[r5]inter t0/0/0
[r5-Tunnel0/0/0]ip add 192.168.6.3 24
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp
[r5-Tunnel0/0/0]source 56.0.0.1
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry multicast dynamic
[r5-Tunnel0/0/0]nhrp entry 192.168.6.1 16.0.0.1 register
[r5-Tunnel0/0/0]nhrp entry 192.168.6.2 46.0.0.1 register
 

  

 5、配置OSPF
R1:
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 192.168.1.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

R2:
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[r2-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

R3:
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 192.168.3.0 0.0.0.255
[r3-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255

R4:
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]network 192.168.4.0 0.0.0.255
[r4-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255

R5:
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 0
[r5-ospf-1-area-0.0.0.0]network 192.168.5.0 0.0.0.255
[r5-ospf-1-area-0.0.0.0]network 192.168.6.0 0.0.0.255
 

修改接口类型:

R1:
[r1]inter t0/0/0
[r1-Tunnel0/0/0]ospf network-type broadcast

R1:
[r1]inter t0/0/1
[r1-Tunnel0/0/1]ospf network-type broadcast

R2:
[r2]inter t0/0/1
[r2-Tunnel0/0/0]ospf network-type broadcast

R3:
[r3]inter t0/0/1
[r3-Tunnel0/0/1]ospf network-type broadcast

R4:
[r4]inter t0/0/0
[r4-Tunnel0/0/0]ospf network-type broadcast

R5:
[r5]inter t0/0/0
[r5-Tunnel0/0/0]ospf network-type broadcast

修改选举优先级

[r2-Tunnel0/0/1]ospf dr-priority 0

[r3-Tunnel0/0/1]ospf dr-priority 0

 

 

 

 

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值