ENSP DHCP+VLAN间路由通信

要想DHCP获取ip的同时又要两端互相ping通那就得在子接口(g0/0/0.1 g0/0/0.2)上配置dhcp和vlan间路由

第一步：先搭好拓扑图（交换机用二层的，用二层不用配置）

第二步：在AR2进行配置

[AR2]dhcp enable        开启DHCP功能
[AR2]ip pool beijin        配置第一个地址池
Info: It's successful to create an IP address pool.
[AR2-ip-pool-beijin]net 192.168.10.0 mask 24
[AR2-ip-pool-beijin]dns-list 192.168.10.254
[AR2-ip-pool-beijin]gateway-list 192.168.10.1
[AR2-ip-pool-beijin]q

[AR2]ip pool shanghai      配置第二个地址池
Info: It's successful to create an IP address pool.
[AR2-ip-pool-shanghai]net 192.168.20.0 mask 24
[AR2-ip-pool-shanghai]dns-list 192.168.20.254
[AR2-ip-pool-shanghai]gateway-list 192.168.20.1
[AR2-ip-pool-shanghai]q

 [AR2-GigabitEthernet0/0/0.1]dot1q termination vid 10 VLAN间路由两个端口都要配
 [AR2-GigabitEthernet0/0/0.1]ip address 192.168.10.1 255.255.255.0 
 [AR2-GigabitEthernet0/0/0.1]arp broadcast enable


 [AR2-GigabitEthernet0/0/1.1]dot1q termination vid 20
 [AR2-GigabitEthernet0/0/1.1ip address 192.168.20.1 255.255.255.0 
 [AR2-GigabitEthernet0/0/1.1]arp broadcast enable

[AR2]int g0/0/0.1
[AR2-GigabitEthernet0/0/0.1]dhcp select global  直接全局应用他好像自动识别1,2的就是你先创pool的循序来应用的
[AR2-GigabitEthernet0/0/0.1]int g0/0/1.1
[AR2-GigabitEthernet0/0/1.1]dhcp select global

[AR2-ip-pool-beijin]excluded-ip-address 192.168.10.254 他可以禁止已用过的ip进行二次分配

交换机上的配置LW3 、LW4

[LW3]vlan batch 10 20
[LW3]interface Ethernet0/0/1
[LW3-Ethernet0/0/1]port link-type access
[LW3-Ethernet0/0/1]port default vlan 10

[LW3]interface Ethernet0/0/2
[LW3-Ethernet0/0/2]port link-type access
[LW3-Ethernet0/0/2]port default vlan 10

[LW3]interface Ethernet0/0/3
[LW3-Ethernet0/0/3]port link-type trunk
[LW3-Ethernet0/0/3]port trunk allow-pass vlan 10 20  连路由的交换机的线路都要配置trunk

[LW4]vlan batch 10 20
[LW4]interface Ethernet0/0/2
[LW4-Ethernet0/0/2]port link-type access
[LW4-Ethernet0/0/2]port default vlan 20

[LW4]interface Ethernet0/0/3
[LW4-Ethernet0/0/3]port link-type access
[LW4-Ethernet0/0/3]port default vlan 20

[LW4]interface Ethernet0/0/1
[LW4-Ethernet0/0/1port link-type trunk
[LW4-Ethernet0/0/1]port trunk allow-pass vlan 10 20  连路由的交换机的线路都要配置trunk

 在pc端调成DHCP模式将其应用

 查看配置结果（刚刚吧254 排除掉了所以他从253开始分配）