啊？我这手速也太差了吧？——C++Easyx“挑战六秒”小游戏

🐑本文作者：C++橙羊🐑

🎮🔊本文代码适合编译环境：DEV-C++💻

✨🧨温馨提示：此文转载于codebus🎉🎠 

最近橙羊在Easyx官网的codebus里随便逛逛的时候，发现了一个有意思的小游戏：挑战六秒。

说实话，我的手速真差，好几次都没按到六秒整。

游戏规则：

按“空格键”开始，再按暂停，继续按将置零！准确暂停到六秒整挑战成功！

其实这个小游戏在商场特别常见，上一次我逛商场碰到了一个挑战九秒。

效果：

 

下面吧代码和注释贴出，大家可以试一试。

（DEV-C++和VS都能运行）

#include<graphics.h>
#include<conio.h>
#include<time.h>

void name();								// 绘制标题提示等
void one(int x, int y);
void two(int x, int y);
void three(int x, int y);
void four(int x, int y);
void five(int x, int y);
void six(int x, int y);
void seven(int x, int y);					// one 到 seven 是组成电子数字的 7 个模块
void HpSleep(int ms);						// 精确延时
void OUTNUMBER(int number, int x, int y);	// 将 7 个模块组成数字 0 到 9
void OUTPUT(int i, int j, int k);			// 在屏幕上显示

int main()
{
	initgraph(800, 600);
	setbkcolor(RGB(6, 31, 62));
	cleardevice();
	name();

	while (true)
	{
		OUTPUT(0, 0, 0);
		_getch();
		bool T = false;
		for (int i = 0; i <= 9; i++)
		{
			if (T)
			{
				break;
			}
			for (int j = 0; j <= 9; j++)
			{
				if (T)
				{
					break;
				}
				for (int k = 0; k <= 9; k++)
				{
					if (_kbhit())
					{
						T = true;
						break;
					}
					OUTPUT(i, j, k);
					HpSleep(10);
				}
			}
		}
		_getch();
		_getch();
	}
	return 0;
}

void name()
{
	RECT r = { 240, 80, 560, 160 };
	settextcolor(RGB(163, 212, 255));
	settextstyle(80, 0, _T("楷体"));
	drawtext(_T("挑战六秒"), &r, DT_CENTER | DT_VCENTER | DT_SINGLELINE);
	settextcolor(RGB(254, 218, 168));
	settextstyle(20, 0, _T("楷体"));
	outtextxy(160,450,_T("提示：按“空格键”开始，再按暂停，继续按将置零！"));
	settextcolor(RGB(252, 191, 116));
	outtextxy(160, 480, _T("准确暂停到六秒整挑战成功！"));
}

void one(int x, int y)
{
	int pts[] = { 36 + x, 14 + y, 59 + x, 39 + y, 118 + x, 39 + y, 138 + x, 15 + y, 131 + x, 9 + y, 41 + x, 9 + y };
	setfillcolor(RGB(176, 215, 254));
	solidpolygon((POINT*)pts, 6);
}

void two(int x, int y)
{
	int pts[] = { 32 + x, 17 + y, 53 + x, 40 + y, 47 + x, 96 + y, 26 + x, 113 + y, 18 + x, 102 + y, 25 + x, 27 + y };
	setfillcolor(RGB(184, 249, 251));
	solidpolygon((POINT*)pts, 6);
}

void three(int x, int y)
{
	int pts[] = { 143 + x, 20 + y, 152 + x, 31 + y, 144 + x, 105 + y, 132 + x, 115 + y, 115 + x, 98 + y, 122 + x, 41 + y, };
	setfillcolor(RGB(187, 250, 255));
	solidpolygon((POINT*)pts, 6);
}

void four(int x, int y)
{
	int pts[] = { 46 + x, 101 + y, 113 + x, 101 + y, 127 + x, 116 + y, 111 + x, 131 + y, 45 + x, 131 + y, 29 + x, 117 + y };
	setfillcolor(RGB(187, 254, 219));
	solidpolygon((POINT*)pts, 6);
}

void five(int x, int y)
{
	int pts[] = { 25 + x, 120 + y, 43 + x, 136 + y, 38 + x, 199 + y, 15 + x, 223 + y, 6 + x, 209 + y, 15 + x, 127 + y };
	setfillcolor(RGB(245, 255, 192));
	solidpolygon((POINT*)pts, 6);
}

void six(int x, int y)
{
	int pts[] = { 132 + x, 119 + y, 144 + x, 128 + y, 136 + x, 213 + y, 129 + x, 222 + y, 107 + x, 201 + y, 115 + x, 134 + y };
	setfillcolor(RGB(245, 255, 190));
	solidpolygon((POINT*)pts, 6);
}

void seven(int x, int y)
{
	int pts[] = { 40 + x, 203 + y, 104 + x, 203 + y, 126 + x, 226 + y, 120 + x, 231 + y, 24 + x, 231 + y, 18 + x, 226 + y };
	setfillcolor(RGB(251, 221, 185));
	solidpolygon((POINT*)pts, 6);
}

void OUTNUMBER(int number, int x, int y)
{
	setfillcolor(RGB(6, 31, 62));
	solidrectangle(x, y, x + 160, y + 240);
	switch (number)
	{
	case 0:one(x, y); three(x, y); six(x, y); seven(x, y); five(x, y); two(x, y); break;
	case 1:three(x, y); six(x, y); break;
	case 2:one(x, y); three(x, y); four(x, y); five(x, y); seven(x, y); break;
	case 3:one(x, y); three(x, y); four(x, y); six(x, y); seven(x, y); break;
	case 4:two(x, y); three(x, y); four(x, y); six(x, y); break;
	case 5:one(x, y); two(x, y); four(x, y); six(x, y); seven(x, y); break;
	case 6:one(x, y); two(x, y); four(x, y); six(x, y); seven(x, y); five(x, y); break;
	case 7:one(x, y); three(x, y); six(x, y); break;
	case 8:one(x, y); three(x, y); six(x, y); seven(x, y); five(x, y); two(x, y); four(x, y); break;
	case 9:one(x, y); three(x, y); six(x, y); seven(x, y); two(x, y); four(x, y); break;
	}
}

void OUTPUT(int i, int j, int k)
{
	OUTNUMBER(i, 80, 180);
	setfillcolor(RGB(64, 157, 254));
	solidcircle(320, 240, 15);
	setfillcolor(RGB(163, 212, 255));
	solidcircle(320, 360, 15);
	OUTNUMBER(j, 400, 180);
	OUTNUMBER(k, 560, 180);
}

// 精确延时函数(可以精确到 1ms，精度 ±1ms)
// 记得加头文件 time.h
// by yangw80<yw80@qq.com>, 2011-5-4
void HpSleep(int ms)
{
	static clock_t oldclock = clock();		// 静态变量，记录上一次 tick
	oldclock += ms * CLOCKS_PER_SEC / 1000;	// 更新 tick
	if (clock() > oldclock)					// 如果已经超时，无需延时
		oldclock = clock();
	else
	while (clock() < oldclock)				// 延时
	Sleep(1);								// 释放 CPU 控制权，降低 CPU 占用率
}

那么本篇就到这了。我是橙羊，拜拜~