ensp创建拓扑

1、建立一个拓扑

 2、配置路由器的地址

R1的ip地址

[r1-GigabitEthernet0/0/0]ip address 1.1.1.1 24
[r1-GigabitEthernet0/0/1]ip address 1.1.1.2 24

环回接口地址配置

[r1-LoopBack0]ip address 192.168.1.1 27
[r1-LoopBack1]ip address 192.168.1.33 27

 

R2的ip地址

[r2-GigabitEthernet0/0/1]ip address 2.2.2.2 24
[r2-GigabitEthernet0/0/0]ip address 2.2.2.1 24

环回接口地址配置
[r2-LoopBack2]ip address 192.168.1.65 27
[r2-LoopBack3]ip address 192.168.1.97 27

 

R3的IP地址

[r3-GigabitEthernet0/0/0]ip address 3.3.3.1 24
[r3-GigabitEthernet0/0/1]ip address 3.3.3.2 24

环回接口地址配置
[r3-LoopBack4]ip address 192.168.1.129 27
[r3-LoopBack5]ip address 192.168.1.161 27

 

R4的ip地址

[r4-GigabitEthernet0/0/0]ip address 4.4.4.1 24
[r4-GigabitEthernet0/0/1]ip address 4.4.4.2 24

[r4-GigabitEthernet0/0/2]ip address 192.168.3.1 24
[r4-GigabitEthernet4/0/0]ip address 192.168.2.1 24

环回接口地址配置

r4-LoopBack6]ip address 192.168.1.193 27
[r4-LoopBack7]ip address 192.168.1.225 27

 

R5的ip地址

[r5-GigabitEthernet0/0/1]ip address 192.168.2.2 24
[r5-GigabitEthernet0/0/0]ip address 192.168.3.2 24

3，将100m的优先级配为61，让这条路线作为备份线路

[r4]ip route-static 192.168.3.0 24 192.168.3.2 preference 61
4、全网可达

R1中

[r1]ip route-static 4.4.4.0 24 3.3.3.1
[r1]ip route-static 4.4.4.0 24 2.2.2.2

[r1]ip route-static 2.2.2.0 24 1.1.1.2
[r1]ip route-static 3.3.3.0 24 3.3.3.1
 

R4中

[r4]ip route-static 1.1.1.0 24 3.3.3.2
[r4]ip route-static 1.1.1.0 24 2.2.2.1

[r4]ip route-static 2.2.2.0 24 2.2.2.1 
[r4]ip route-static 3.3.3.0 24 3.3.3.2