交换综合实验-三层架构

 

1.配置eth-trunk口

[sw1]int Eth-Trunk 0

[sw1-Eth-Trunk0]int g0/0/22

[sw1-GigabitEthernet0/0/22]eth-trunk 0

[sw1-GigabitEthernet0/0/22]int g0/0/23

[sw1-GigabitEthernet0/0/23]eth-trunk 0

[sw2]int Eth-Trunk 0

[sw2-Eth-Trunk0]int g0/0/22

[sw2-GigabitEthernet0/0/22]eth-trunk 0

[sw2-GigabitEthernet0/0/22]int g0/0/23

[sw2-GigabitEthernet0/0/23]eth-trunk 0

2.配置vlan

[sw3]int e0/0/1

[sw3-Ethernet0/0/1]port link-type access

[sw3-Ethernet0/0/1]port default vlan 1

[sw3-Ethernet0/0/1]int e0/0/2

[sw3-Ethernet0/0/2]port link-type access

[sw3-Ethernet0/0/2]port default vlan 2

[sw4]int e0/0/1

[sw4-Ethernet0/0/1]port link-type access

[sw4-Ethernet0/0/1]port default vlan 1

[sw4-Ethernet0/0/1]int e0/0/2

[sw4-Ethernet0/0/2]port link-type access

[sw4-Ethernet0/0/2]port default vlan 2

3.配置trunk

[SW1]port-group group-member GigabitEthernet 0/0/1 GigabitEthernet 0/0/2 Eth-Trunk 0

[SW1-port-group]port link-type trunk

[SW1-port-group]port trunk allow-pass vlan 2

[SW2]port-group group-member GigabitEthernet 0/0/2 GigabitEthernet 0/0/1 Eth-Trunk 0

[SW2-port-group]port link-type trunk

[SW2-port-group]port trunk allow-pass vlan 2

[SW3]port-group group-member GigabitEthernet 0/0/1 GigabitEthernet 0/0/2

[SW3-port-group]port link-type trunk

[SW3-port-group]port trunk allow-pass vlan 2

[SW4]port-group group-member GigabitEthernet 0/0/2 GigabitEthernet 0/0/1

[SW4-port-group]port link-type trunk

[SW4-port-group]port trunk allow-pass vlan 2

4.配置stp

[SW1]stp enable

[SW1]stp mode mstp

[SW1-mst-region]region-name a

[SW1-mst-region]instance 1 vlan 1

[SW1-mst-region]instance 2 vlan 2

[SW1-mst-region]active region-configuration

[SW1]stp instance 1 root primary

[SW1]stp instance 2 root secondary

[SW2]stp enable

[SW2]stp mode mstp

[SW2-mst-region]region-name a

[SW2-mst-region]instance 1 vlan 1

[SW2-mst-region]instance 2 vlan 2

[SW2-mst-region]active region-configuration

[SW2]stp instance 2 root primary

[SW2]stp instance 1 root secondary

5.配置svi

[SW1]int Vlanif 1

[SW1-Vlanif 1]ip a 172.16.1.254 24

[SW1]int Vlanif 2

[SW1-Vlanif 2]ip a 172.16.2.254 24

[SW2]int Vlanif 1

[SW2-Vlanif 1]ip a 172.16.1.253 24

[SW2]int Vlanif 2

[SW2-Vlanif 2]ip a 172.16.2.253 24

6.配置vrrp

[sw1]int Vlanif 1

[sw1-Vlanif1]vrrp vrid 1 virtual-ip 172.16.1.200

[sw1-Vlanif1]vrrp vrid 1 priority 101

[sw1-Vlanif1]vrrp vrid 1 track interface g0/0/1 reduced 10

[sw1]int Vlanif 2

[sw1-Vlanif2]vrrp vrid 1 virtual-ip 172.16.1.200

[sw2]int Vlanif 1

[sw2-Vlanif1]vrrp vrid 1 virtual-ip 172.16.1.200

[sw1]int Vlanif 2

[sw2-Vlanif1]vrrp vrid 1 virtual-ip 172.16.2.200

[sw2-Vlanif1]vrrp vrid 1 priority 101

[sw2-Vlanif1]vrrp vrid 1 track interface g0/0/1 reduced 10

7.配置dhcp

[sw1]dhcp enable

[sw1]ip pool vlan1

[sw1-ip-pool-vlan1]network 172.16.1.0 mask 24

[sw1-ip-pool-vlan1]gateway-list 172.16.1.200

[sw1]ip pool vlan2

[sw1-ip-pool-vlan2]network 172.16.2.0 mask 24

[sw1-ip-pool-vlan2]gateway-list 172.16.2.200

[sw1]dhcp enable

[sw1]int vlan1

[sw1-Vlanif1]dhcp select global

[sw1]int Vlanif 2

[sw1-Vlanif2]dhcp select global

[sw2]dhcp enable

[sw2]ip pool vlan1

[sw2-ip-pool-vlan1]network 172.16.1.0 mask 24

[sw2-ip-pool-vlan1]gateway-list 172.16.1.200

[sw2]ip pool vlan2

[sw2-ip-pool-vlan2]network 172.16.2.0 mask 24

[sw2-ip-pool-vlan2]gateway-list 172.16.2.200

[sw2]dhcp enable

[sw2]int vlan1

[sw2-Vlanif1]dhcp select global

[sw2]int Vlanif 2

[sw2-Vlanif2]dhcp select global

8.配置ip

[sw1]int Vlanif 3

[sw1-Vlanif3]ip add 172.16.3.2 24

[sw1-Vlanif3]int g0/0/24

[sw1-GigabitEthernet0/0/24]port link-type access

[sw1-GigabitEthernet0/0/24]port default vlan 3

[sw1-GigabitEthernet0/0/24]stp edged-port enable

[sw2]int Vlanif 4

[sw2-Vlanif4]ip add 172.16.4.2 24

[sw2-Vlanif4]int g0/0/24

[sw2-GigabitEthernet0/0/24]port link-type access

[sw2-GigabitEthernet0/0/24]port default vlan 4

[sw2-GigabitEthernet0/0/24]stp edged-port enable

[r1]int g0/0/1

[r1-GigabitEthernet0/0/1]ip add 12.1.1.1 24

[r1-GigabitEthernet0/0/0]int g0/0/0

[r1-GigabitEthernet0/0/0]ip add 172.16.3.1 24

[r1-GigabitEthernet0/0/0]int g0/0/2

[r1-GigabitEthernet0/0/1]ip add 172.16.4.1 24

[r2]int g0/0/0

[r2-GigabitEthernet0/0/0]ip add 12.1.1.2 24

[r2-LoopBack0]ip add 2.2.2.2 24

9.配置ospf

[r1]ospf 1 router-id 10.10.10.10

[r1-ospf-1]area 0

[r1-ospf-1-area-0.0.0.0]network 172.16.3.0 0.0.0.255

[r1-ospf-1-area-0.0.0.0]network 172.16.4.0 0.0.0.255

sw1

[sw1]ospf 1 router-id 1.1.1.1

[sw1-ospf-1]area 0

[sw1-ospf-1-area-0.0.0.0]network 172.16.3.0 0.0.0.255

[sw1-ospf-1-area-0.0.0.0]network 172.16.1.0 0.0.0.255

[sw1-ospf-1-area-0.0.0.0]network 172.16.2.0 0.0.0.255

[sw2-ospf-1]silent-interface Vlanif2

[sw2-ospf-1]silent-interface GigabitEthernet0/0/1

[sw2-ospf-1]silent-interface GigabitEthernet0/0/2

sw2

[sw2]ospf 1 router-id 2.2.2.2

[sw2-ospf-1]area 0

[sw2-ospf-1-area-0.0.0.0]network 172.16.4.0 0.0.0.255

[sw2-ospf-1-area-0.0.0.0]network 172.16.1.0 0.0.0.255

[sw2-ospf-1-area-0.0.0.0]network 172.16.2.0 0.0.0.255

[sw2-ospf-1]silent-interface Vlanif2

[sw2-ospf-1]silent-interface GigabitEthernet0/0/2

[sw2-ospf-1]silent-interface GigabitEthernet0/0/1

10.连接外网

[r1]acl 2000

[r1-acl-basic-2000]rule permit source 172.16.0.0 0.0.255.255

[r1]int g0/0/0

[r1-GigabitEthernet0/0/0]nat outbound 2000

[r1]ospf 1

[r1-ospf-1]default-route-advertise

[sw1]ip route-static 172.16.0.0 16 NULL 0

[sw2]ip route-static 172.16.0.0 16 NULL 0