【期刊】【主题不符】【IEEE车辆技术杂志】【 IEEE Vehicular Technology Magazine】

https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=10209

Aims & Scope 目标和范围

IEEE Vehicular Technology Magazine publishes peer-reviewed articles covering advances in areas of interest to the IEEE Vehicular Technology Society: The theoretical, experimental, application and operational aspects of electrical and electronic engineering relevant to motor vehicles and associated land transportation infrastructure: (a) Mobile radio shall include technologies appropriate to terrestrial mobile vehicular services. (b) Motor vehicles shall include the components, systems and auxiliary functions. (c) Land transportation shall include the components and systems used in both automated and non-automated facets of ground transport technology, especially as they relate to vehicular systems. The magazine focuses on intra-vehicular components, systems and applications. It includes tutorials, surveys, coverage of emerging technology in the aforementioned fields, and serves as a means for the IEEE VTS governing body to communicate with its membership.
《IEEE车辆技术杂志》发表同行评议文章,涵盖IEEE车辆技术协会感兴趣的领域的进展:与机动车辆和相关陆路交通基础设施有关的电气和电子工程的理论、实验、应用和操作方面: (a) 移动无线电应包括适合地面移动车辆服务的技术。(b) 机动车辆应包括部件、系统和辅助功能。(c) 陆路运输应包括地面运输技术的自动化和非自动化方面所使用的部件和系统,特别是与车辆系统有关的部件和系统。该杂志重点关注车内组件、系统和应用。它包括上述领域的教程、调查、新兴技术的报道,并作为 IEEE VTS 管理机构与其成员沟通的一种方式。

Additional Information 其他信息

The articles in this magazine are peer reviewed in accordance with the requirements set forth in the IEEE PSPB Operations Manual (sections 8.2.1.C & 8.2.2.A). Each published article was reviewed by a minimum of two independent reviewers using a single-anonymous peer review process, where the identities of the reviewers are not known to the authors, but the reviewers know the identities of the authors. Articles will be screened for plagiarism before acceptance.
本杂志中的文章根据IEEE PSPB操作手册(第8.2.1.C节和第8.2.2.A节)中规定的要求进行同行评审。每篇发表的文章都由至少两名独立审稿人使用单匿名同行评审程序进行审稿,其中作者不知道审稿人的身份,但审稿人知道作者的身份。文章在接受前将被筛选为抄袭。

Corresponding authors from low-income countries are eligible for waived or reduced open access APCs.
来自低收入国家的通讯作者有资格获得豁免或减少的开放获取APC。

Publication Details 出版详情

Publishing Policies 发布策略

This publication considers original works that enhance the existing body of knowledge. Original review articles and surveys are acceptable, even if new data/concepts are not presented. Results described in the article should not have been submitted or published elsewhere. Expanded versions of conference publications may be submitted. Articles must be intelligible and must be written in standard English.
该出版物考虑了增强现有知识体系的原创作品。即使没有提出新的数据/概念,原始评论文章和调查也是可以接受的。文章中描述的结果不应在其他地方提交或发表。可以提交会议出版物的扩展版本。文章必须易于理解,并且必须用标准英语撰写。

Peer Review: Peer review is vital to the quality of published research. Each article submitted to IEEE is evaluated by at least two independent reviewers selected by a member of the publication's editorial board. Learn more about the IEEE peer review process.
同行评议:同行评议对已发表研究的质量至关重要。提交给IEEE的每篇文章都由出版物编辑委员会成员选出的至少两名独立审稿人进行评估。了解有关IEEE同行评审流程的更多信息。

Publication Fees: This publication is supported by subscriptions and applicable Article Processing Charges (APCs).
出版费用:本出版物由订阅和适用的文章处理费 (APC) 支持。

Plan S Funded Authors: This is a Transformative Journal that is fully compliant with Plan S, enabling a Coalition S funded author to publish their research open access and be compliant with funder mandates. Read more about IEEE Transformative Journals.
S 计划资助的作者:这是一本完全符合 S 计划的变革性期刊,使 Coalition S 资助的作者能够发表他们的研究开放获取并遵守资助者的要求。阅读更多关于IEEE Transformative Journals的信息。

Errors in Published Articles: Authors who have detected an error in their published article should contact the Editor-in-Chief shown below to request the publication of a correction. Note that no change may be made to the original article after it is published in IEEE Xplore. Letter to the Editor articles which discuss an article in this publication will be considered. The authors of the original article will be given the opportunity to reply to the Letter to the Editor. Submit your Letter to the Editor article via Submit Manuscript at the top of the page.
已发表文章中的错误:在已发表文章中发现错误的作者应联系如下所示的主编,要求发表更正。请注意,在IEEE Xplore上发表后,不得对原始文章进行任何更改。给编辑的信 讨论本出版物中文章的文章将被考虑。原文的作者将有机会回复给编辑的信。通过页面顶部的提交稿件向编辑提交您的信。

Other Policies: 其他政策:

Information 信息

Sponsored by 赞助商

Editor-in-Chief 主编
Prof. Javier Gozalvez 


Javier Gozalvez

Universidad Miguel Hernandez de Elche Dpto. Ingeniería de Comunicaciones
米格尔·埃尔南德斯(Miguel Hernandez),埃尔切大学通信工程系
Avda de la Universidad, s/n
Avda de la Universidad, s/n
03202 Elche, SPAIN 03202 埃尔切, 西班牙
j.gozalvez@umh.es
Phone: +34 96 665 8955
电话: +34 96 665 8955

Sr Manager Advertising and Business Development
广告和业务发展高级经理

Mark David 马克·大卫
m.david@ieee.org

Subjects 科目

Aerospace 航空 航天

Computing and Processing 计算与处理

Robotics and Control Systems
机器人和控制系统

Transportation 运输

  • 30
    点赞
  • 18
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
目标检测(Object Detection)是计算机视觉领域的一个核心问题,其主要任务是找出图像中所有感兴趣的目标(物体),并确定它们的类别和位置。以下是对目标检测的详细阐述: 一、基本概念 目标检测的任务是解决“在哪里?是什么?”的问题,即定位出图像中目标的位置并识别出目标的类别。由于各类物体具有不同的外观、形状和姿态,加上成像时光照、遮挡等因素的干扰,目标检测一直是计算机视觉领域最具挑战性的任务之一。 二、核心问题 目标检测涉及以下几个核心问题: 分类问题:判断图像中的目标属于哪个类别。 定位问题:确定目标在图像中的具体位置。 大小问题:目标可能具有不同的大小。 形状问题:目标可能具有不同的形状。 三、算法分类 基于深度学习的目标检测算法主要分为两大类: Two-stage算法:先进行区域生成(Region Proposal),生成有可能包含待检物体的预选框(Region Proposal),再通过卷积神经网络进行样本分类。常见的Two-stage算法包括R-CNN、Fast R-CNN、Faster R-CNN等。 One-stage算法:不用生成区域提议,直接在网络中提取特征来预测物体分类和位置。常见的One-stage算法包括YOLO系列(YOLOv1、YOLOv2、YOLOv3、YOLOv4、YOLOv5等)、SSD和RetinaNet等。 四、算法原理 以YOLO系列为例,YOLO将目标检测视为回归问题,将输入图像一次性划分为多个区域,直接在输出层预测边界框和类别概率。YOLO采用卷积网络来提取特征,使用全连接层来得到预测值。其网络结构通常包含多个卷积层和全连接层,通过卷积层提取图像特征,通过全连接层输出预测结果。 五、应用领域 目标检测技术已经广泛应用于各个领域,为人们的生活带来了极大的便利。以下是一些主要的应用领域: 安全监控:在商场、银行
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

资源存储库

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值