STM32使用高级定时器和通用定时器的配置区别

正点原子例程里面用的是通用定时器TIM3，我想要将其换成高级定时器TIM1,那么有哪些区别呢
1.时钟使能：
如下可以看到，高级定时器TIM1挂载在APB2总线，通用定时器TIM3挂载在APB1总线。

RCC_APB1PeriphClockCmd(RCC_APB1Periph_TIM3, ENABLE); //TIM3时钟使能
RCC_APB2PeriphClockCmd(RCC_APB2Periph_TIM1, ENABLE); //TIM1时钟使能

//APB1下的外设，包含TIM3
#define RCC_APB1Periph_TIM2              ((uint32_t)0x00000001)
#define RCC_APB1Periph_TIM3              ((uint32_t)0x00000002)
#define RCC_APB1Periph_TIM4              ((uint32_t)0x00000004)
#define RCC_APB1Periph_TIM5              ((uint32_t)0x00000008)
#define RCC_APB1Periph_TIM6              ((uint32_t)0x00000010)
#define RCC_APB1Periph_TIM7              ((uint32_t)0x00000020)
#define RCC_APB1Periph_TIM12             ((uint32_t)0x00000040)
#define RCC_APB1Periph_TIM13             ((uint32_t)0x00000080)
#define RCC_APB1Periph_TIM14             ((uint32_t)0x00000100)
#define RCC_APB1Periph_WWDG              ((uint32_t)0x00000800)
#define RCC_APB1Periph_SPI2              ((uint32_t)0x00004000)
#define RCC_APB1Periph_SPI3              ((uint32_t)0x00008000)
#define RCC_APB1Periph_USART2            ((uint32_t)0x00020000)
#define RCC_APB1Periph_USART3            ((uint32_t)0x00040000)
#define RCC_APB1Periph_UART4             ((uint32_t)0x00080000)
#define RCC_APB1Periph_UART5             ((uint32_t)0x00100000)
#define RCC_APB1Periph_I2C1              ((uint32_t)0x00200000)
#define RCC_APB1Periph_I2C2              ((uint32_t)0x00400000)
#define RCC_APB1Periph_USB               ((uint32_t)0x00800000)
#define RCC_APB1Periph_CAN1              ((uint32_t)0x02000000)
#define RCC_APB1Periph_CAN2              ((uint32_t)0x04000000)
#define RCC_APB1Periph_BKP               ((uint32_t)0x08000000)
#define RCC_APB1Periph_PWR               ((uint32_t)0x10000000)
#define RCC_APB1Periph_DAC               ((uint32_t)0x20000000)
#define RCC_APB1Periph_CEC               ((uint32_t)0x40000000)
#define IS_RCC_APB1_PERIPH(PERIPH) ((((PERIPH) & 0x81013600) == 0x00) && ((PERIPH) != 0x00))

//APB1下的外设，包含TIM1
#define RCC_APB2Periph_AFIO              ((uint32_t)0x00000001)
#define RCC_APB2Periph_GPIOA             ((uint32_t)0x00000004)
#define RCC_APB2Periph_GPIOB             ((uint32_t)0x00000008)
#define RCC_APB2Periph_GPIOC             ((uint32_t)0x00000010)
#define RCC_APB2Periph_GPIOD             ((uint32_t)0x00000020)
#define RCC_APB2Periph_GPIOE             ((uint32_t)0x00000040)
#define RCC_APB2Periph_GPIOF             ((uint32_t)0x00000080)
#define RCC_APB2Periph_GPIOG             ((uint32_t)0x00000100)
#define RCC_APB2Periph_ADC1              ((uint32_t)0x00000200)
#define RCC_APB2Periph_ADC2              ((uint32_t)0x00000400)
#define RCC_APB2Periph_TIM1              ((uint32_t)0x00000800)
#define RCC_APB2Periph_SPI1              ((uint32_t)0x00001000)
#define RCC_APB2Periph_TIM8              ((uint32_t)0x00002000)
#define RCC_APB2Periph_USART1            ((uint32_t)0x00004000)
#define RCC_APB2Periph_ADC3              ((uint32_t)0x00008000)
#define RCC_APB2Periph_TIM15             ((uint32_t)0x00010000)
#define RCC_APB2Periph_TIM16             ((uint32_t)0x00020000)
#define RCC_APB2Periph_TIM17             ((uint32_t)0x00040000)
#define RCC_APB2Periph_TIM9              ((uint32_t)0x00080000)
#define RCC_APB2Periph_TIM10             ((uint32_t)0x00100000)
#define RCC_APB2Periph_TIM11             ((uint32_t)0x00200000)
#define IS_RCC_APB2_PERIPH(PERIPH) ((((PERIPH) & 0xFFC00002) == 0x00) && ((PERIPH) != 0x00))

2.中断配置
通用定时器中断配置一个： TIM3_IRQ
高级定时器中断配置四个： TIM1_BRK_IRQn、 TIM1_UP_IRQn、 TIM1_TRG_COM_IRQn、 TIM1_CC_IRQn