Latex入门1-安装和小练习

准备工作：

下载Latex:文件大小为3.7G均可。

双击不能运行.iso文件,如下图所示，可以解压.iso文件，文件夹中出现install-tl-windows.bat文件，双击运行，然后一直下一步，其中可以修改安装目录，然后就静静的等待就好啦。

安装TeXworks editor：
texstudio-3.0.4-win-portable-qt5:链接：https://pan.baidu.com/s/11hgjRVf0RujixtYgpsmozQ
提取码：wwyy
因为是便携版，解压缩之后有.exe文件，双击就可以使用，不需要安装。
（不推荐cTex，会出有问题）

小试牛刀：

texstudio简单使用，界面如下，在文件中复制下面的IEEE trans模板到软件页面上，然后保存tex文件（必须是英文路径），再点击绿色箭头，刚刚存储.tex文件的目录，就会出现.pdf文件，就是我们所需要的。
`

\documentclass[journal]{IEEEtran}
\ifCLASSINFOpdf
\else
\fi
\hyphenation{op-tical net-works semi-conduc-tor}
\begin{document}
\title{Bare Demo of IEEEtran.cls\\ for IEEE Journals}
\author{Michael~Shell,~\IEEEmembership{Member,~IEEE,}
        John~Doe,~\IEEEmembership{Fellow,~OSA,}
        and~Jane~Doe,~\IEEEmembership{Life~Fellow,~IEEE}% <-this % stops a space
\thanks{M. Shell was with the Department
of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta,
GA, 30332 USA e-mail: (see http://www.michaelshell.org/contact.html).}% <-this % stops a space
\thanks{J. Doe and J. Doe are with Anonymous University.}% <-this % stops a space
\thanks{Manuscript received April 19, 2005; revised August 26, 2015.}}
\markboth{Journal of \LaTeX\ Class Files,~Vol.~14, No.~8, August~2015}%
{Shell \MakeLowercase{\textit{et al.}}: Bare Demo of IEEEtran.cls for IEEE Journals}
 
\maketitle
\begin{abstract}
The abstract goes here.
\end{abstract}
 
% Note that keywords are not normally used for peerreview papers.
\begin{IEEEkeywords}
IEEE, IEEEtran, journal, \LaTeX, paper, template.
\end{IEEEkeywords}
\IEEEpeerreviewmaketitle
 
\section{Introduction}
\IEEEPARstart{T}{his} demo file is intended to serve as a ``starter file''
for IEEE journal papers produced under \LaTeX\ using
IEEEtran.cls version 1.8b and later.
I wish you the best of success.
 
\hfill mds
 
\hfill August 26, 2015
 
\subsection{Subsection Heading Here}
Subsection text here.
\subsubsection{Subsubsection Heading Here}
Subsubsection text here.
 
\section{Conclusion}
The conclusion goes here.
\appendices
\section{Proof of the First Zonklar Equation}
Appendix one text goes here.
 
% you can choose not to have a title for an appendix
% if you want by leaving the argument blank
\section{}
Appendix two text goes here.
 
 
% use section* for acknowledgment
\section*{Acknowledgment}
 
 
The authors would like to thank...
 
\ifCLASSOPTIONcaptionsoff
  \newpage
\fi
 
\begin{thebibliography}{1}
 
\bibitem{IEEEhowto:kopka}
H.~Kopka and P.~W. Daly, \emph{A Guide to \LaTeX}, 3rd~ed.\hskip 1em plus
  0.5em minus 0.4em\relax Harlow, England: Addison-Wesley, 1999.
 
\end{thebibliography}
 
\begin{IEEEbiography}{Michael Shell}
Biography text here.
\end{IEEEbiography}
 
% if you will not have a photo at all:
\begin{IEEEbiographynophoto}{John Doe}
Biography text here.
\end{IEEEbiographynophoto}
 
% insert where needed to balance the two columns on the last page with
% biographies
%\newpage
 
\begin{IEEEbiographynophoto}{Jane Doe}
Biography text here.
\end{IEEEbiographynophoto}
 
\end{document}

参考链接

https://blog.csdn.net/zxt1484675627/article/details/107729130