一、flume的案例
1)案例1:Avro
Avro可以发送一个给定的文件给Flume,Avro 源使用AVRO RPC机制。
a)创建agent配置文件
b)启动flume agent a1
c)创建指定文件
d)使用avro-client发送文件
d)使用avro-client发送文件
f)在m1的控制台,可以看到以下信息,注意最后一行:
2)案例2:Spool
Spool监测配置的目录下新增的文件,并将文件中的数据读取出来。需要注意两点:
1) 拷贝到spool目录下的文件不可以再打开编辑。
2) spool目录下不可包含相应的子目录
a)创建agent配置文件
b)启动flume agent a1
c)追加文件到/home/hadoop/flume-1.5.0-bin/logs目录
d)在m1的控制台,可以看到以下相关信息:
3)案例3:Exec
EXEC执行一个给定的命令获得输出的源,如果要使用tail命令,必选使得file足够大才能看到输出内容
a)创建agent配置文件
b)启动flume agent a1
c)生成足够多的内容在文件里
e)在m1的控制台,可以看到以下信息:
4)案例4:Syslogtcp
Syslogtcp监听TCP的端口做为数据源
a)创建agent配置文件
b)启动flume agent a1
c)测试产生syslog
d)在m1的控制台,可以看到以下信息:
5)案例5:JSONHandler
a)创建agent配置文件
b)启动flume agent a1
c)生成JSON 格式的POST request
d)在m1的控制台,可以看到以下信息:
6)案例6:Hadoop sink
a)创建agent配置文件
b)启动flume agent a1
c)测试产生syslog
d)在m1的控制台,可以看到以下信息:
e)在m1上再打开一个窗口,去hadoop上检查文件是否生成
7)案例7:File Roll Sink
a)创建agent配置文件
b)启动flume agent a1
c)测试产生log
d)查看/home/hadoop/flume-1.5.0-bin/logs下是否生成文件,默认每30秒生成一个新文件
8)案例8:Replicating Channel Selector
Flume支持Fan out流从一个源到多个通道。有两种模式的Fan out,分别是复制和复用。在复制的情况下,流的事件被发送到所有的配置通道。在复用的情况下,事件被发送到可用的渠道中的一个子集。Fan out流需要指定源和Fan out通道的规则。
这次我们需要用到m1,m2两台机器
a)在m1创建replicating_Channel_Selector配置文件
b)在m1创建replicating_Channel_Selector_avro配置文件
c)在m1上将2个配置文件复制到m2上一份
d)打开4个窗口,在m1和m2上同时启动两个flume agent
e)然后在m1或m2的任意一台机器上,测试产生syslog
f)在m1和m2的sink窗口,分别可以看到以下信息,这说明信息得到了同步:
9)案例9:Multiplexing Channel Selector
a)在m1创建Multiplexing_Channel_Selector配置文件
b)在m1创建Multiplexing_Channel_Selector_avro配置文件
c)将2个配置文件复制到m2上一份
d)打开4个窗口,在m1和m2上同时启动两个flume agent
e)然后在m1或m2的任意一台机器上,测试产生syslog
f)在m1的sink窗口,可以看到以下信息:
g)在m2的sink窗口,可以看到以下信息:
failover的机器是一直发送给其中一个sink,当这个sink不可用的时候,自动发送到下一个sink。
a)在m1创建Flume_Sink_Processors配置文件
b)在m1创建Flume_Sink_Processors_avro配置文件
c)将2个配置文件复制到m2上一份
d)打开4个窗口,在m1和m2上同时启动两个flume agent
e)然后在m1或m2的任意一台机器上,测试产生log
复制代码
f)因为m2的优先级高,所以在m2的sink窗口,可以看到以下信息,而m1没有:
g)这时我们停止掉m2机器上的sink(ctrl+c),再次输出测试数据:
h)可以在m1的sink窗口,看到读取到了刚才发送的两条测试数据:
i)我们再在m2的sink窗口中,启动sink:
j)输入两批测试数据:
k)在m2的sink窗口,我们可以看到以下信息,因为优先级的关系,log消息会再次落到m2上:
11)案例11:Load balancing Sink Processor
load balance type和failover不同的地方是,load balance有两个配置,一个是轮询,一个是随机。两种情况下如果被选择的sink不可用,就会自动尝试发送到下一个可用的sink上面。
a)在m1创建Load_balancing_Sink_Processors配置文件
b)在m1创建Load_balancing_Sink_Processors_avro配置文件
c)将2个配置文件复制到m2上一份
d)打开4个窗口,在m1和m2上同时启动两个flume agent
e)然后在m1或m2的任意一台机器上,测试产生log,一行一行输入,输入太快,容易落到一台机器上
f)在m1的sink窗口,可以看到以下信息:
复制代码
g)在m2的sink窗口,可以看到以下信息:
说明轮询模式起到了作用。
12)案例12:Hbase sink
a)在测试之前,请先参考《 ubuntu12.04+hadoop2.2.0+zookeeper3.4.5+hbase0.96.2+hive0.13.1分布式环境部署 》将hbase启动
b)然后将以下文件复制到flume中:
c)确保test_idoall_org表在hbase中已经存在
d)在m1创建hbase_simple配置文件
e)启动flume agent
f)测试产生syslog
g)这时登录到hbase中,可以发现新数据已经插入
1)案例1:Avro
Avro可以发送一个给定的文件给Flume,Avro 源使用AVRO RPC机制。
a)创建agent配置文件
- root@m1:/home/hadoop#vi /home/hadoop/flume-1.5.0-bin/conf/avro.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = avro
- a1.sources.r1.channels = c1
- a1.sources.r1.bind = 0.0.0.0
- a1.sources.r1.port = 4141
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# echo "hello world" > /home/hadoop/flume-1.5.0-bin/log.00
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /home/hadoop/flume-1.5.0-bin/log.00
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng avro-client -c . -H m1 -p 4141 -F /
- root@m1:/home/hadoop/flume-1.5.0-bin/conf# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/avro.conf -n a1 -Dflume.root.logger=INFO,console
- Info: Sourcing environment configuration script /home/hadoop/flume-1.5.0-bin/conf/flume-env.sh
- Info: Including Hadoop libraries found via (/home/hadoop/hadoop-2.2.0/bin/hadoop) for HDFS access
- Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-api-1.7.5.jar from classpath
- Info: Excluding /home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar from classpath
- ...
- 2014-08-10 10:43:25,112 (New I/O worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] UNBOUND
- 2014-08-10 10:43:25,112 (New I/O worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.handleUpstream(NettyServer.java:171)] [id: 0x92464c4f, /192.168.1.50:59850 :> /192.168.1.50:4141] CLOSED
- 2014-08-10 10:43:25,112 (New I/O worker #1) [INFO - org.apache.avro.ipc.NettyServer$NettyServerAvroHandler.channelClosed(NettyServer.java:209)] Connection to /192.168.1.50:59850 disconnected.
- 2014-08-10 10:43:26,718 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 68 65 6C 6C 6F 20 77 6F 72 6C 64 hello world }
Spool监测配置的目录下新增的文件,并将文件中的数据读取出来。需要注意两点:
1) 拷贝到spool目录下的文件不可以再打开编辑。
2) spool目录下不可包含相应的子目录
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/spool.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = spooldir
- a1.sources.r1.channels = c1
- a1.sources.r1.spoolDir = /home/hadoop/flume-1.5.0-bin/logs
- a1.sources.r1.fileHeader = true
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
-
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/spool.conf -n a1 -Dflume.root.logger=INFO,console
-
- root@m1:/home/hadoop# echo "spool test1" > /home/hadoop/flume-1.5.0-bin/logs/spool_text.log
- 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:13 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:14 INFO avro.ReliableSpoolingFileEventReader: Preparing to move file /home/hadoop/flume-1.5.0-bin/logs/spool_text.log to /home/hadoop/flume-1.5.0-bin/logs/spool_text.log.COMPLETED
- 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:14 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:14 INFO sink.LoggerSink: Event: { headers:{file=/home/hadoop/flume-1.5.0-bin/logs/spool_text.log} body: 73 70 6F 6F 6C 20 74 65 73 74 31 spool test1 }
- 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:15 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:16 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
- 14/08/10 11:37:17 INFO source.SpoolDirectorySource: Spooling Directory Source runner has shutdown.
EXEC执行一个给定的命令获得输出的源,如果要使用tail命令,必选使得file足够大才能看到输出内容
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = exec
- a1.sources.r1.channels = c1
- a1.sources.r1.command = tail -F /home/hadoop/flume-1.5.0-bin/log_exec_tail
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/exec_tail.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# for i in {1..100};do echo "exec tail$i" >> /home/hadoop/flume-1.5.0-bin/log_
- 2014-08-10 10:59:25,513 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74 exec tail test }
- 2014-08-10 10:59:34,535 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 20 74 65 73 74 exec tail test }
- 2014-08-10 11:01:40,557 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31 exec tail1 }
- 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 32 exec tail2 }
- 2014-08-10 11:01:41,180 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 33 exec tail3 }
- 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 34 exec tail4 }
- 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 35 exec tail5 }
- 2014-08-10 11:01:41,181 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 36 exec tail6 }
- ....
- ....
- ....
- 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 36 exec tail96 }
- 2014-08-10 11:01:51,550 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 37 exec tail97 }
- 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 38 exec tail98 }
- 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 39 39 exec tail99 }
- 2014-08-10 11:01:51,551 (SinkRunner-PollingRunner-DefaultSinkProcessor) [INFO - org.apache.flume.sink.LoggerSink.process(LoggerSink.java:70)] Event: { headers:{} body: 65 78 65 63 20 74 61 69 6C 31 30 30 exec tail100 }
-
Syslogtcp监听TCP的端口做为数据源
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.host = localhost
- a1.sources.r1.channels = c1
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140
- 14/08/10 11:41:45 INFO node.PollingPropertiesFileConfigurationProvider: Reloading configuration file:/home/hadoop/flume-1.5.0-bin/conf/syslog_tcp.conf
- 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Added sinks: k1 Agent: a1
- 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
- 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Processing:k1
- 14/08/10 11:41:45 INFO conf.FlumeConfiguration: Post-validation flume configuration contains configuration for agents: [a1]
- 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Creating channels
- 14/08/10 11:41:45 INFO channel.DefaultChannelFactory: Creating instance of channel c1 type memory
- 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Created channel c1
- 14/08/10 11:41:45 INFO source.DefaultSourceFactory: Creating instance of source r1, type syslogtcp
- 14/08/10 11:41:45 INFO sink.DefaultSinkFactory: Creating instance of sink: k1, type: logger
- 14/08/10 11:41:45 INFO node.AbstractConfigurationProvider: Channel c1 connected to [r1, k1]
- 14/08/10 11:41:45 INFO node.Application: Starting new configuration:{ sourceRunners:{r1=EventDrivenSourceRunner: { source:org.apache.flume.source.SyslogTcpSource{name:r1,state:IDLE} }} sinkRunners:{k1=SinkRunner: { policy:org.apache.flume.sink.DefaultSinkProcessor@6538b14 counterGroup:{ name:null counters:{} } }} channels:{c1=org.apache.flume.channel.MemoryChannel{name: c1}} }
- 14/08/10 11:41:45 INFO node.Application: Starting Channel c1
- 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
- 14/08/10 11:41:45 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
- 14/08/10 11:41:45 INFO node.Application: Starting Sink k1
- 14/08/10 11:41:45 INFO node.Application: Starting Source r1
- 14/08/10 11:41:45 INFO source.SyslogTcpSource: Syslog TCP Source starting...
- 14/08/10 11:42:15 WARN source.SyslogUtils: Event created from Invalid Syslog data.
- 14/08/10 11:42:15 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/post_json.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
- a1.sources.r1.port = 8888
- a1.sources.r1.channels = c1
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/post_json.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"a" : "a1","b" : "b1"},"body" : "idoall.org_body"}]' http://localhost:8888
- 14/08/10 11:49:59 INFO node.Application: Starting Channel c1
- 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
- 14/08/10 11:49:59 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
- 14/08/10 11:49:59 INFO node.Application: Starting Sink k1
- 14/08/10 11:49:59 INFO node.Application: Starting Source r1
- 14/08/10 11:49:59 INFO mortbay.log: Logging to org.slf4j.impl.Log4jLoggerAdapter(org.mortbay.log) via org.mortbay.log.Slf4jLog
- 14/08/10 11:49:59 INFO mortbay.log: jetty-6.1.26
- 14/08/10 11:50:00 INFO mortbay.log: Started SelectChannelConnector@0.0.0.0:8888
- 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
- 14/08/10 11:50:00 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
- 14/08/10 12:14:32 INFO sink.LoggerSink: Event: { headers:{b=b1, a=a1} body: 69 64 6F 61 6C 6C 2E 6F 72 67 5F 62 6F 64 79 idoall.org_body }
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.host = localhost
- a1.sources.r1.channels = c1
-
- # Describe the sink
- a1.sinks.k1.type = hdfs
- a1.sinks.k1.channel = c1
- a1.sinks.k1.hdfs.path = hdfs://m1:9000/user/flume/syslogtcp
- a1.sinks.k1.hdfs.filePrefix = Syslog
- a1.sinks.k1.hdfs.round = true
- a1.sinks.k1.hdfs.roundValue = 10
- a1.sinks.k1.hdfs.roundUnit = minute
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hdfs_sink.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# echo "hello idoall flume -> hadoop testing one" | nc localhost 5140
-
- 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: CHANNEL, name: c1: Successfully registered new MBean.
- 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: CHANNEL, name: c1 started
- 14/08/10 12:20:39 INFO node.Application: Starting Sink k1
- 14/08/10 12:20:39 INFO node.Application: Starting Source r1
- 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SINK, name: k1: Successfully registered new MBean.
- 14/08/10 12:20:39 INFO instrumentation.MonitoredCounterGroup: Component type: SINK, name: k1 started
- 14/08/10 12:20:39 INFO source.SyslogTcpSource: Syslog TCP Source starting...
- 14/08/10 12:21:46 WARN source.SyslogUtils: Event created from Invalid Syslog data.
- 14/08/10 12:21:49 INFO hdfs.HDFSSequenceFile: writeFormat = Writable, UseRawLocalFileSystem = false
- 14/08/10 12:21:49 INFO hdfs.BucketWriter: Creating hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
- 14/08/10 12:22:20 INFO hdfs.BucketWriter: Closing hdfs://m1:9000/user/flume/syslogtcp//Syslog.1407644509504.tmp
- 14/08/10 12:22:20 INFO hdfs.BucketWriter: Close tries incremented
- 14/08/10 12:22:20 INFO hdfs.BucketWriter: Renaming hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504.tmp to hdfs://m1:9000/user/flume/syslogtcp/Syslog.1407644509504
- 14/08/10 12:22:20 INFO hdfs.HDFSEventSink: Writer callback called.
- root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -ls /user/flume/syslogtcp
- Found 1 items
- -rw-r--r-- 3 root supergroup 155 2014-08-10 12:22 /user/flume/syslogtcp/Syslog.1407644509504
- root@m1:/home/hadoop# /home/hadoop/hadoop-2.2.0/bin/hadoop fs -cat /user/flume/syslogtcp/Syslog.1407644509504
- SEQ!org.apache.hadoop.io.LongWritable"org.apache.hadoop.io.BytesWritable^;>Gv$hello idoall flume -> hadoop testing one
-
a)创建agent配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5555
- a1.sources.r1.host = localhost
- a1.sources.r1.channels = c1
-
- # Describe the sink
- a1.sinks.k1.type = file_roll
- a1.sinks.k1.sink.directory = /home/hadoop/flume-1.5.0-bin/logs
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/file_roll.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5555
- root@m1:/home/hadoop# echo "hello idoall.org syslog 2" | nc localhost 5555
- root@m1:/home/hadoop# ll /home/hadoop/flume-1.5.0-bin/logs
- 总用量 272
- drwxr-xr-x 3 root root 4096 Aug 10 12:50 ./
- drwxr-xr-x 9 root root 4096 Aug 10 10:59 ../
- -rw-r--r-- 1 root root 50 Aug 10 12:49 1407646164782-1
- -rw-r--r-- 1 root root 0 Aug 10 12:49 1407646164782-2
- -rw-r--r-- 1 root root 0 Aug 10 12:50 1407646164782-3
- root@m1:/home/hadoop# cat /home/hadoop/flume-1.5.0-bin/logs/1407646164782-1 /home/hadoop/flume-1.5.0-bin/logs/1407646164782-2
- hello idoall.org syslog
- hello idoall.org syslog 2
Flume支持Fan out流从一个源到多个通道。有两种模式的Fan out,分别是复制和复用。在复制的情况下,流的事件被发送到所有的配置通道。在复用的情况下,事件被发送到可用的渠道中的一个子集。Fan out流需要指定源和Fan out通道的规则。
这次我们需要用到m1,m2两台机器
a)在m1创建replicating_Channel_Selector配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
-
- a1.sources = r1
- a1.sinks = k1 k2
- a1.channels = c1 c2
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.host = localhost
- a1.sources.r1.channels = c1 c2
- a1.sources.r1.selector.type = replicating
-
- # Describe the sink
- a1.sinks.k1.type = avro
- a1.sinks.k1.channel = c1
- a1.sinks.k1.hostname = m1
- a1.sinks.k1.port = 5555
-
- a1.sinks.k2.type = avro
- a1.sinks.k2.channel = c2
- a1.sinks.k2.hostname = m2
- a1.sinks.k2.port = 5555
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- a1.channels.c2.type = memory
- a1.channels.c2.capacity = 1000
- a1.channels.c2.transactionCapacity = 100
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = avro
- a1.sources.r1.channels = c1
- a1.sources.r1.bind = 0.0.0.0
- a1.sources.r1.port = 5555
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf
-
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/replicating_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console
-
- root@m1:/home/hadoop# echo "hello idoall.org syslog" | nc localhost 5140
-
- 14/08/10 14:08:18 INFO ipc.NettyServer: Connection to /192.168.1.51:46844 disconnected.
- 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] OPEN
- 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
- 14/08/10 14:08:52 INFO ipc.NettyServer: [id: 0x90f8fe1f, /192.168.1.50:35873 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35873
- 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] OPEN
- 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
- 14/08/10 14:08:59 INFO ipc.NettyServer: [id: 0xd6318635, /192.168.1.51:46858 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46858
- 14/08/10 14:09:20 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 68 65 6C 6C 6F 20 69 64 6F 61 6C 6C 2E 6F 72 67 hello idoall.org }
-
a)在m1创建Multiplexing_Channel_Selector配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
-
- a1.sources = r1
- a1.sinks = k1 k2
- a1.channels = c1 c2
-
- # Describe/configure the source
- a1.sources.r1.type = org.apache.flume.source.http.HTTPSource
- a1.sources.r1.port = 5140
- a1.sources.r1.channels = c1 c2
- a1.sources.r1.selector.type = multiplexing
-
- a1.sources.r1.selector.header = type
- #映射允许每个值通道可以重叠。默认值可以包含任意数量的通道。
- a1.sources.r1.selector.mapping.baidu = c1
- a1.sources.r1.selector.mapping.ali = c2
- a1.sources.r1.selector.default = c1
-
- # Describe the sink
- a1.sinks.k1.type = avro
- a1.sinks.k1.channel = c1
- a1.sinks.k1.hostname = m1
- a1.sinks.k1.port = 5555
-
- a1.sinks.k2.type = avro
- a1.sinks.k2.channel = c2
- a1.sinks.k2.hostname = m2
- a1.sinks.k2.port = 5555
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- a1.channels.c2.type = memory
- a1.channels.c2.capacity = 1000
- a1.channels.c2.transactionCapacity = 100
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = avro
- a1.sources.r1.channels = c1
- a1.sources.r1.bind = 0.0.0.0
- a1.sources.r1.port = 5555
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf
-
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector_avro.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Multiplexing_Channel_Selector.conf -n a1 -Dflume.root.logger=INFO,console
-
e)然后在m1或m2的任意一台机器上,测试产生syslog
- root@m1:/home/hadoop# curl -X POST -d '[{ "headers" :{"type" : "baidu"},"body" : "idoall_TEST1"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "ali"},"body" : "idoall_TEST2"}]' http://localhost:5140 && curl -X POST -d '[{ "headers" :{"type" : "qq"},"body" : "idoall_TEST3"}]' http://localhost:5140
-
- 14/08/10 14:32:21 INFO node.Application: Starting Sink k1
- 14/08/10 14:32:21 INFO node.Application: Starting Source r1
- 14/08/10 14:32:21 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
- 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
- 14/08/10 14:32:21 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
- 14/08/10 14:32:21 INFO source.AvroSource: Avro source r1 started.
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] OPEN
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0xcf00eea6, /192.168.1.50:35916 => /192.168.1.50:5555] CONNECTED: /192.168.1.50:35916
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] OPEN
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x432f5468, /192.168.1.51:46945 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:46945
- 14/08/10 14:34:11 INFO sink.LoggerSink: Event: { headers:{type=baidu} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 31 idoall_TEST1 }
- 14/08/10 14:34:57 INFO sink.LoggerSink: Event: { headers:{type=qq} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 33 idoall_TEST3 }
-
- 14/08/10 14:32:27 INFO node.Application: Starting Sink k1
- 14/08/10 14:32:27 INFO node.Application: Starting Source r1
- 14/08/10 14:32:27 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
- 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
- 14/08/10 14:32:27 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
- 14/08/10 14:32:27 INFO source.AvroSource: Avro source r1 started.
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] OPEN
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
- 14/08/10 14:32:36 INFO ipc.NettyServer: [id: 0x7c2f0aec, /192.168.1.50:38104 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38104
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] OPEN
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
- 14/08/10 14:32:44 INFO ipc.NettyServer: [id: 0x3d36f553, /192.168.1.51:48599 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48599
- 14/08/10 14:34:33 INFO sink.LoggerSink: Event: { headers:{type=ali} body: 69 64 6F 61 6C 6C 5F 54 45 53 54 32 idoall_TEST2 }
-
可以看到,根据header中不同的条件分布到不同的channel上
failover的机器是一直发送给其中一个sink,当这个sink不可用的时候,自动发送到下一个sink。
a)在m1创建Flume_Sink_Processors配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
-
- a1.sources = r1
- a1.sinks = k1 k2
- a1.channels = c1 c2
-
- #这个是配置failover的关键,需要有一个sink group
- a1.sinkgroups = g1
- a1.sinkgroups.g1.sinks = k1 k2
- #处理的类型是failover
- a1.sinkgroups.g1.processor.type = failover
- #优先级,数字越大优先级越高,每个sink的优先级必须不相同
- a1.sinkgroups.g1.processor.priority.k1 = 5
- a1.sinkgroups.g1.processor.priority.k2 = 10
- #设置为10秒,当然可以根据你的实际状况更改成更快或者很慢
- a1.sinkgroups.g1.processor.maxpenalty = 10000
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.channels = c1 c2
- a1.sources.r1.selector.type = replicating
-
-
- # Describe the sink
- a1.sinks.k1.type = avro
- a1.sinks.k1.channel = c1
- a1.sinks.k1.hostname = m1
- a1.sinks.k1.port = 5555
-
- a1.sinks.k2.type = avro
- a1.sinks.k2.channel = c2
- a1.sinks.k2.hostname = m2
- a1.sinks.k2.port = 5555
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- a1.channels.c2.type = memory
- a1.channels.c2.capacity = 1000
- a1.channels.c2.transactionCapacity = 100
b)在m1创建Flume_Sink_Processors_avro配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = avro
- a1.sources.r1.channels = c1
- a1.sources.r1.bind = 0.0.0.0
- a1.sources.r1.port = 5555
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
c)将2个配置文件复制到m2上一份
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf
-
d)打开4个窗口,在m1和m2上同时启动两个flume agent
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console
-
e)然后在m1或m2的任意一台机器上,测试产生log
- root@m1:/home/hadoop# echo "idoall.org test1 failover" | nc localhost 5140
f)因为m2的优先级高,所以在m2的sink窗口,可以看到以下信息,而m1没有:
- 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:48692 disconnected.
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] OPEN
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0x09a14036, /192.168.1.51:48704 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48704
- 14/08/10 15:03:26 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
-
g)这时我们停止掉m2机器上的sink(ctrl+c),再次输出测试数据:
- root@m1:/home/hadoop# echo "idoall.org test2 failover" | nc localhost 5140
h)可以在m1的sink窗口,看到读取到了刚才发送的两条测试数据:
- 14/08/10 15:02:46 INFO ipc.NettyServer: Connection to /192.168.1.51:47036 disconnected.
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] OPEN
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] BOUND: /192.168.1.50:5555
- 14/08/10 15:03:12 INFO ipc.NettyServer: [id: 0xbcf79851, /192.168.1.51:47048 => /192.168.1.50:5555] CONNECTED: /192.168.1.51:47048
- 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
- 14/08/10 15:07:56 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
-
i)我们再在m2的sink窗口中,启动sink:
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Flume_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
-
j)输入两批测试数据:
- root@m1:/home/hadoop# echo "idoall.org test3 failover" | nc localhost 5140 && echo "idoall.org test4 failover" | nc localhost 5140
-
k)在m2的sink窗口,我们可以看到以下信息,因为优先级的关系,log消息会再次落到m2上:
- 14/08/10 15:09:47 INFO node.Application: Starting Sink k1
- 14/08/10 15:09:47 INFO node.Application: Starting Source r1
- 14/08/10 15:09:47 INFO source.AvroSource: Starting Avro source r1: { bindAddress: 0.0.0.0, port: 5555 }...
- 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Monitored counter group for type: SOURCE, name: r1: Successfully registered new MBean.
- 14/08/10 15:09:47 INFO instrumentation.MonitoredCounterGroup: Component type: SOURCE, name: r1 started
- 14/08/10 15:09:47 INFO source.AvroSource: Avro source r1 started.
- 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] OPEN
- 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
- 14/08/10 15:09:54 INFO ipc.NettyServer: [id: 0x96615732, /192.168.1.51:48741 => /192.168.1.51:5555] CONNECTED: /192.168.1.51:48741
- 14/08/10 15:09:57 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
- 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] OPEN
- 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] BOUND: /192.168.1.51:5555
- 14/08/10 15:10:43 INFO ipc.NettyServer: [id: 0x12621f9a, /192.168.1.50:38166 => /192.168.1.51:5555] CONNECTED: /192.168.1.50:38166
- 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }
- 14/08/10 15:10:43 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }
-
11)案例11:Load balancing Sink Processor
load balance type和failover不同的地方是,load balance有两个配置,一个是轮询,一个是随机。两种情况下如果被选择的sink不可用,就会自动尝试发送到下一个可用的sink上面。
a)在m1创建Load_balancing_Sink_Processors配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
-
- a1.sources = r1
- a1.sinks = k1 k2
- a1.channels = c1
-
- #这个是配置Load balancing的关键,需要有一个sink group
- a1.sinkgroups = g1
- a1.sinkgroups.g1.sinks = k1 k2
- a1.sinkgroups.g1.processor.type = load_balance
- a1.sinkgroups.g1.processor.backoff = true
- a1.sinkgroups.g1.processor.selector = round_robin
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.channels = c1
-
-
- # Describe the sink
- a1.sinks.k1.type = avro
- a1.sinks.k1.channel = c1
- a1.sinks.k1.hostname = m1
- a1.sinks.k1.port = 5555
-
- a1.sinks.k2.type = avro
- a1.sinks.k2.channel = c1
- a1.sinks.k2.hostname = m2
- a1.sinks.k2.port = 5555
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
b)在m1创建Load_balancing_Sink_Processors_avro配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = avro
- a1.sources.r1.channels = c1
- a1.sources.r1.bind = 0.0.0.0
- a1.sources.r1.port = 5555
-
- # Describe the sink
- a1.sinks.k1.type = logger
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
c)将2个配置文件复制到m2上一份
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf
- root@m1:/home/hadoop/flume-1.5.0-bin# scp -r /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf root@m2:/home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf
-
d)打开4个窗口,在m1和m2上同时启动两个flume agent
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors_avro.conf -n a1 -Dflume.root.logger=INFO,console
- root@m1:/home/hadoop# /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/Load_balancing_Sink_Processors.conf -n a1 -Dflume.root.logger=INFO,console
-
e)然后在m1或m2的任意一台机器上,测试产生log,一行一行输入,输入太快,容易落到一台机器上
- root@m1:/home/hadoop# echo "idoall.org test1" | nc localhost 5140
- root@m1:/home/hadoop# echo "idoall.org test2" | nc localhost 5140
- root@m1:/home/hadoop# echo "idoall.org test3" | nc localhost 5140
- root@m1:/home/hadoop# echo "idoall.org test4" | nc localhost 5140
f)在m1的sink窗口,可以看到以下信息:
- 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 32 idoall.org test2 }
- 14/08/10 15:35:33 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 34 idoall.org test4 }
-
g)在m2的sink窗口,可以看到以下信息:
- 14/08/10 15:35:27 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 31 idoall.org test1 }
- 14/08/10 15:35:29 INFO sink.LoggerSink: Event: { headers:{Severity=0, flume.syslog.status=Invalid, Facility=0} body: 69 64 6F 61 6C 6C 2E 6F 72 67 20 74 65 73 74 33 idoall.org test3 }
-
说明轮询模式起到了作用。
12)案例12:Hbase sink
a)在测试之前,请先参考《 ubuntu12.04+hadoop2.2.0+zookeeper3.4.5+hbase0.96.2+hive0.13.1分布式环境部署 》将hbase启动
b)然后将以下文件复制到flume中:
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/protobuf-java-2.5.0.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-client-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-common-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-protocol-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-server-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop2-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/hbase-hadoop-compat-0.96.2-hadoop2.jar /home/hadoop/flume-1.5.0-bin/lib@@@
- cp /home/hadoop/hbase-0.96.2-hadoop2/lib/htrace-core-2.04.jar /home/hadoop/flume-1.5.0-bin/lib
-
d)在m1创建hbase_simple配置文件
- root@m1:/home/hadoop# vi /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf
-
- a1.sources = r1
- a1.sinks = k1
- a1.channels = c1
-
- # Describe/configure the source
- a1.sources.r1.type = syslogtcp
- a1.sources.r1.port = 5140
- a1.sources.r1.host = localhost
- a1.sources.r1.channels = c1
-
- # Describe the sink
- a1.sinks.k1.type = logger
- a1.sinks.k1.type = hbase
- a1.sinks.k1.table = test_idoall_org
- a1.sinks.k1.columnFamily = name
- a1.sinks.k1.column = idoall
- a1.sinks.k1.serializer = org.apache.flume.sink.hbase.RegexHbaseEventSerializer
- a1.sinks.k1.channel = memoryChannel
-
- # Use a channel which buffers events in memory
- a1.channels.c1.type = memory
- a1.channels.c1.capacity = 1000
- a1.channels.c1.transactionCapacity = 100
-
- # Bind the source and sink to the channel
- a1.sources.r1.channels = c1
- a1.sinks.k1.channel = c1
- /home/hadoop/flume-1.5.0-bin/bin/flume-ng agent -c . -f /home/hadoop/flume-1.5.0-bin/conf/hbase_simple.conf -n a1 -Dflume.root.logger=INFO,console
f)测试产生syslog
- root@m1:/home/hadoop# echo "hello idoall.org from flume" | nc localhost 5140
g)这时登录到hbase中,可以发现新数据已经插入
- root@m1:/home/hadoop# /home/hadoop/hbase-0.96.2-hadoop2/bin/hbase shell
- 2014-08-10 16:09:48,984 INFO [main] Configuration.deprecation: hadoop.native.lib is deprecated. Instead, use io.native.lib.available
- HBase Shell; enter 'help<RETURN>' for list of supported commands.
- Type "exit<RETURN>" to leave the HBase Shell
- Version 0.96.2-hadoop2, r1581096, Mon Mar 24 16:03:18 PDT 2014
-
- hbase(main):001:0> list
- TABLE
- SLF4J: Class path contains multiple SLF4J bindings.
- SLF4J: Found binding in [jar:file:/home/hadoop/hbase-0.96.2-hadoop2/lib/slf4j-log4j12-1.6.4.jar!/org/slf4j/impl/StaticLoggerBinder.class]
- SLF4J: Found binding in [jar:file:/home/hadoop/hadoop-2.2.0/share/hadoop/common/lib/slf4j-log4j12-1.7.5.jar!/org/slf4j/impl/StaticLoggerBinder.class]
- SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
- hbase2hive_idoall
- hive2hbase_idoall
- test_idoall_org
- 3 row(s) in 2.6880 seconds
-
- => ["hbase2hive_idoall", "hive2hbase_idoall", "test_idoall_org"]
- hbase(main):002:0> scan "test_idoall_org"
- ROW COLUMN+CELL
- 10086 column=name:idoall, timestamp=1406424831473, value=idoallvalue
- 1 row(s) in 0.0550 seconds
-
- hbase(main):003:0> scan "test_idoall_org"
- ROW COLUMN+CELL
- 10086 column=name:idoall, timestamp=1406424831473, value=idoallvalue
- 1407658495588-XbQCOZrKK8-0 column=name:payload, timestamp=1407658498203, value=hello idoall.org from flume
- 2 row(s) in 0.0200 seconds
-
- hbase(main):004:0> quit
经过这么多flume的例子测试,如果你全部做完后,会发现flume的功能真的很强大,可以进行各种搭配来完成你想要的工作,俗话说师傅领进门,修行在个人,如何能够结合你的产品业务,将flume更好的应用起来,快去动手实践吧。