pyTorch进阶-torch

一、Broadcast自动扩展

Expand和unsquee的结合，习惯性行是高维度，列是低维度

example:

小维度指定，大维度随意

二、拼接与拆分

• Cat
• Stack：增加新的维度
• Split(按照长度进行拆分)
• Chunk(按照数量进行拆分)

torch.stack

torch.stack(sequence, dim=0)

参数:

• sqequence (Sequence) – 待连接的张量序列
• dim (int) – 插入的维度。必须介于 0 与 待连接的张量序列数之间。

沿着一个新维度对输入张量序列进行连接。 序列中所有的张量都应该为相同形状。

>>> a=torch.rand(32,8)
>>> b=torch.rand(32,8)
>>> c=torch.rand(32,8)
>>> torch.stack([a,b,c],dim=0).shape
torch.Size([3, 32, 8])
>>> torch.stack([a,b,c],dim=1).shape #a,b,c的维度需完全一样
torch.Size([32, 3, 8])

torch.split

torch.split(tensor, split_size, dim=0)

参数:

• tensor (Tensor) – 待分割张量
• split_size (int) – 单个分块的形状大小
• dim (int) – 沿着此维进行分割

将输入张量分割成相等形状的chunks(如果可分)。 如果沿指定维的张量形状大小不能被split_size 整分， 则最后一个分块会小于其它分块。

torch.chunk

torch.chunk(tensor, chunks, dim=0)

参数：

• tensor (Tensor) ：待分块的输入张量
• chunks (int) ： 分块的个数
• dim (int) ：沿着此维度进行分块

>>> b=torch.rand(32,8)
>>> a=torch.rand(32,8)
>>> c=torch.stack([a,b],0)
>>> c.shape
torch.Size([2, 32, 8])
>>> aa,bb=c.split([1,1],dim=0)#具体有两个块，每个块的len由[1,1]指定
>>> aa.shape,bb.shape
(torch.Size([1, 32, 8]), torch.Size([1, 32, 8]))
>>> aa,bb=c.split(1,dim=0)  #每个块的len为1
>>> 
>>> aa.shape,bb.shape
(torch.Size([1, 32, 8]), torch.Size([1, 32, 8]))
>>> aa,bb=c.split(2,dim=0) #只能拆成一个tensor,不能用两个tensor接受
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ValueError: not enough values to unpack (expected 2, got 1)
>>> aa,bb=c.chunk(2,dim=0) #快数为2
>>> aa.shape,bb.shape
(torch.Size([1, 32, 8]), torch.Size([1, 32, 8]))

ctorch.Cat

torch.cat(inputs, dimension=0) → Tensor

参数：

• inputs (sequence of Tensors) ：可以是任意相同Tensor 类型的python 序列
• dimension (int, optional) ：沿着此维度连接张量序列。

在给定维度上对输入的张量序列seq 进行连接操作。torch.cat()可以看做 torch.split() 和 torch.chunk()的反操作。

>>> a=torch.rand(4,32,8)
>>> b=torch.rand(5,32,8)
>>> torch.cat([a,b],dim=0).shape
torch.Size([9, 32, 8])
>>> x = torch.randn(2,3)
>>> x
tensor([[-0.1026,  0.9607, -0.5655],
        [-0.0174,  2.6582,  2.0188]])
>>> torch.cat((x,x,x),0)
tensor([[-0.1026,  0.9607, -0.5655],
        [-0.0174,  2.6582,  2.0188],
        [-0.1026,  0.9607, -0.5655],
        [-0.0174,  2.6582,  2.0188],
        [-0.1026,  0.9607, -0.5655],
        [-0.0174,  2.6582,  2.0188]])
>>> torch.cat((x,x,x),1)
tensor([[-0.1026,  0.9607, -0.5655, -0.1026,  0.9607, -0.5655, -0.1026,  0.9607,
         -0.5655],
        [-0.0174,  2.6582,  2.0188, -0.0174,  2.6582,  2.0188, -0.0174,  2.6582,
          2.0188]])
#####cat和stack
>>> a.shape
torch.Size([32, 8])
>>> b=torch.rand([30,8])
>>> torch.stack([a,b],dim=0) #stack作拼接是增加新的维度，需要a b两个张量的维度形状完全一致
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
RuntimeError: invalid argument 0: Sizes of tensors must match except in dimension 0. Got 32 and 30 in dimension 1 at /pytorch/aten/src/TH/generic/THTensor.cpp:689
>>> torch.cat([a,b],dim=0).shape#cat是在指定维度上作拼接
torch.Size([62, 8])

torch.gather

torch.gather(input, dim, index, out=None) → Tensor

参数:

• input (Tensor) – 源张量
• dim (int) – 索引的轴
• index (LongTensor) – 聚合元素的下标
• out (Tensor, optional) – 目标张量

沿给定轴dim，将输入索引张量index指定位置的值进行聚合。

对一个3维张量，输出的定义：

out[i][j][k] = tensor[index[i][j][k]][j][k]  # dim=0,行
out[i][j][k] = tensor[i][index[i][j][k]][k]  # dim=1，列
out[i][j][k] = tensor[i][j][index[i][j][k]]  # dim=3

example:

>>> t=torch.Tensor([[1,2],[3,4]])
>>> t.shape
torch.Size([2, 2])
>>> torch.gather(t,1,torch.LongTensor([[0,0],[1,0]]))
tensor([[1., 1.],
        [4., 3.]])
>>> torch.gather(t,1,torch.LongTensor([[0,1],[1,0]]))
tensor([[1., 2.],
        [4., 3.]])
>>> torch.gather(t,0,torch.LongTensor([[0,1],[1,0]]))
tensor([[1., 4.],
        [3., 2.]])
>>> torch.gather(t,0,torch.LongTensor([[0,0],[1,0]]))
tensor([[1., 2.],
        [3., 2.]])

三、数学运算

• Add/minus/multiply/divide
• Matmul(矩阵式相乘)
• Pow
• Sqrt/rsqrt
• Round

basic(+ - * / add sub mul div)

建议直接使用运算符

>>> a=torch.rand(3,4)
>>> b=torch.rand(4)  #broadingcast机制
>>> a+b
tensor([[0.2349, 1.7635, 1.4385, 0.5826],
        [0.7362, 0.9101, 0.9326, 0.7863],
        [0.2260, 1.1575, 0.4948, 0.4016]])
>>> torch.add(a,b)
tensor([[0.2349, 1.7635, 1.4385, 0.5826],
        [0.7362, 0.9101, 0.9326, 0.7863],
        [0.2260, 1.1575, 0.4948, 0.4016]])
>>> torch.all(torch.eq(a-b,torch.sub(a,b)))
tensor(True)
>>> torch.all(torch.eq(a*b,torch.mul(a,b)))
tensor(True)
>>> torch.all(torch.eq(a/b,torch.div(a,b)))
tensor(True)

matmul

• Torch.mm(only for 2d 不推荐)
• Torch.matmul(推荐)
• @

注意：①*是element-wise,对应元素相乘；②.matmul是矩阵相乘

Example:

>>> a=torch.rand(4,784)
>>> x=torch.rand(4,784)
>>> w=torch.rand(512,784) #pytorch写法：第一个维度为ch-out(降维的维度),第二个维度为ch-in()
>>> (x@w.t()).shape #w若是高维矩阵，则使用transpose进行转置
torch.Size([4, 512])

#### matiple dims(支持多个矩阵并行相乘)
>>> a=torch.rand(4,3,28,64)
>>> b=torch.rand(4,3,64,32)
>>> torch.matmul(a,b).shape
torch.Size([4, 3, 28, 32])
>>> b=torch.rand(4,1,64,32) #broadingcast和矩阵相乘相结合
>>> torch.matmul(a,b).shape
torch.Size([4, 3, 28, 32])
>>> b=torch.rand(4,64,32)
>>> torch.matmul(a,b).shape
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
RuntimeError: The size of tensor a (3) must match the size of tensor b (4) at non-singleton dimension 1

Power

>>> a=torch.full([2,2],3)
>>> a.pow(2)
tensor([[9., 9.],
        [9., 9.]])
>>> a**2
tensor([[9., 9.],
        [9., 9.]])
>>> aa=a**2
>>> aa.sqrt()
tensor([[3., 3.],
        [3., 3.]])
>>> aa.rsqrt()  ##倒数
tensor([[0.3333, 0.3333],
        [0.3333, 0.3333]])
>>> aa**0.5
tensor([[3., 3.],
        [3., 3.]])
>>> aa**0.25

Exp log

近似值

• .floor(向下取整).ceil(向上取整)
• .round(四舍五入)
• .trunc(整数部分).frac(小数部分)

torch.clamp

• gradient clipping
• (min)
• (min,max)

>>> grad=torch.rand(2,3)*15
>>> grad.max()
tensor(11.2428)
>>> grad.median()
tensor(3.1227)
>>> grad.clamp(10) #小于10的数用10代替
tensor([[10.0000, 10.0000, 10.0000],
        [10.0000, 10.0000, 11.2428]])
>>> grad
tensor([[ 3.5420,  8.3126,  1.7083],
        [ 0.2245,  3.1227, 11.2428]])
>>> grad.clamp(0,10)#返回一个在0到10之间的张量，大于10的用10代替
tensor([[ 3.5420,  8.3126,  1.7083],
        [ 0.2245,  3.1227, 10.0000]])

四、统计属性(statistics)

• norm
• mean sum
• prod
• max min argmin(最小值的index) argmax(最大值的index)
• kthvalue,topk

norm

• vs normalize/batch_norm
• matrix norm vs vector norm

norm-p

>>> a=torch.full([8],1)
>>> b=a.view(2,4)
>>> c=a.view(2,2,2)
>>> b
tensor([[1., 1., 1., 1.],
        [1., 1., 1., 1.]])
>>> b.norm(1,dim=1)
tensor([4., 4.])
>>> b.norm(1,dim=0)
tensor([2., 2., 2., 2.])
>>> 
>>> c.norm(1,dim=0)
tensor([[2., 2.],
        [2., 2.]])
>>> c.norm(2,dim=0)
tensor([[1.4142, 1.4142],
        [1.4142, 1.4142]])
>>> c.norm(1,dim=1)
tensor([[2., 2.],
        [2., 2.]])

argmin argmax

​

>>> a=torch.randn(4,10)
>>> a.argmax()
tensor(19)
>>> a.argmax(dim=1)
tensor([9, 9, 7, 2])

dim keepdim

Top-k(排在前k的)/k-thvalue(第k小的值)

>>> a=torch.rand(4,10)
>>> a
tensor([[0.0558, 0.5948, 0.5399, 0.1482, 0.6319, 0.7229, 0.3600, 0.1825, 0.7594,
         0.8119],
        [0.2995, 0.2717, 0.0817, 0.2484, 0.3984, 0.6939, 0.5643, 0.2380, 0.5323,
         0.1330],
        [0.3299, 0.8043, 0.6704, 0.8987, 0.7656, 0.5682, 0.3257, 0.7047, 0.5247,
         0.3946],
        [0.7960, 0.7122, 0.8428, 0.7559, 0.2872, 0.1691, 0.1877, 0.4244, 0.7347,
         0.9397]])
>>> a.topk(3,dim=1)
torch.return_types.topk(
values=tensor([[0.8119, 0.7594, 0.7229],
        [0.6939, 0.5643, 0.5323],
        [0.8987, 0.8043, 0.7656],
        [0.9397, 0.8428, 0.7960]]),
indices=tensor([[9, 8, 5],
        [5, 6, 8],
        [3, 1, 4],
        [9, 2, 0]]))
>>> a.topk(3,dim=1,largest=False)
torch.return_types.topk(
values=tensor([[0.0558, 0.1482, 0.1825],
        [0.0817, 0.1330, 0.2380],
        [0.3257, 0.3299, 0.3946],
        [0.1691, 0.1877, 0.2872]]),
indices=tensor([[0, 3, 7],
        [2, 9, 7],
        [6, 0, 9],
        [5, 6, 4]]))
>>> a.kthvalue(8,dim=1) #第8小的值，也就是第三大的值
torch.return_types.kthvalue(
values=tensor([0.7229, 0.5323, 0.7656, 0.7960]),
indices=tensor([5, 8, 4, 0]))
>>> a.kthvalue(3)
torch.return_types.kthvalue(
values=tensor([0.1825, 0.2380, 0.3946, 0.2872]),
indices=tensor([7, 7, 9, 4]))
>>> a.kthvalue(3,dim=1)
torch.return_types.kthvalue(
values=tensor([0.1825, 0.2380, 0.3946, 0.2872]),
indices=tensor([7, 7, 9, 4]))

compare

• >、>=、<、<=、!=、==
• torch.eq(a,b)
• torch.equal(a,b)

>>> a.shape
torch.Size([4, 10])
>>> a
tensor([[0.0558, 0.5948, 0.5399, 0.1482, 0.6319, 0.7229, 0.3600, 0.1825, 0.7594,
         0.8119],
        [0.2995, 0.2717, 0.0817, 0.2484, 0.3984, 0.6939, 0.5643, 0.2380, 0.5323,
         0.1330],
        [0.3299, 0.8043, 0.6704, 0.8987, 0.7656, 0.5682, 0.3257, 0.7047, 0.5247,
         0.3946],
        [0.7960, 0.7122, 0.8428, 0.7559, 0.2872, 0.1691, 0.1877, 0.4244, 0.7347,
         0.9397]])
>>> a>0
tensor([[True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True]])
>>> torch.gt(a,0)
tensor([[True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True]])
>>> a!=0
tensor([[True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True],
        [True, True, True, True, True, True, True, True, True, True]])
>>> a=torch.ones(2,3)
>>> b=torch.randn(2,3)
>>> torch.eq(a,b)
tensor([[False, False, False],
        [False, False, False]])
>>> torch.eq(a,a)
tensor([[True, True, True],
        [True, True, True]])
>>> torch.equal(a,a)
True

五、高阶OP

Tensor advanceed operation

• where
• Gather

whree

gather