1.1 DHCP server on Ubuntu 9.04
1.1.1 Setup interface
- Figure out which ethernet port you'll use to connect your PC to the target board and configure it to use a static IP of 10.0.0.1. Be sure you don't get mixed up and configure the wrong port! Connect the correct port directly to the target board with a crossover ethernet connector.
- On the PC, properly configure the ethernet port that's connected to the target board. You have two choices: configure the Ubuntu GUI interface, "Network Manager" to do it, or disable "Network Manager" and configure the system directly using configuration files. Note that the target board can bring up and drop the ethernet connection repeatedly, so it's important to make sure the proper ethernet configuration is automatically restored
-
- Using Network Manager:
- Open it with System -> Preferences -> Network Connections
- If ethe
- Using Network Manager: