Area
Time Limit: 1000MS | Memory Limit: 10000K | |
Total Submissions: 3946 | Accepted: 1806 |
Description
Being well known for its highly innovative products, Merck would definitely be a good target for industrial espionage. To protect its brand-new research and development facility the company has installed the latest system of surveillance robots patrolling the area. These robots move along the walls of the facility and report suspicious observations to the central security office. The only flaw in the system a competitor抯 agent could find is the fact that the robots radio their movements unencrypted. Not being able to find out more, the agent wants to use that information to calculate the exact size of the area occupied by the new facility. It is public knowledge that all the corners of the building are situated on a rectangular grid and that only straight walls are used. Figure 1 shows the course of a robot around an example area.
Figure 1: Example area.
You are hired to write a program that calculates the area occupied by the new facility from the movements of a robot along its walls. You can assume that this area is a polygon with corners on a rectangular grid. However, your boss insists that you use a formula he is so proud to have found somewhere. The formula relates the number I of grid points inside the polygon, the number E of grid points on the edges, and the total area A of the polygon. Unfortunately, you have lost the sheet on which he had written down that simple formula for you, so your first task is to find the formula yourself.
Figure 1: Example area.
You are hired to write a program that calculates the area occupied by the new facility from the movements of a robot along its walls. You can assume that this area is a polygon with corners on a rectangular grid. However, your boss insists that you use a formula he is so proud to have found somewhere. The formula relates the number I of grid points inside the polygon, the number E of grid points on the edges, and the total area A of the polygon. Unfortunately, you have lost the sheet on which he had written down that simple formula for you, so your first task is to find the formula yourself.
Input
The first line contains the number of scenarios.
For each scenario, you are given the number m, 3 <= m < 100, of movements of the robot in the first line. The following m lines contain pairs 揹x dy�of integers, separated by a single blank, satisfying .-100 <= dx, dy <= 100 and (dx, dy) != (0, 0). Such a pair means that the robot moves on to a grid point dx units to the right and dy units upwards on the grid (with respect to the current position). You can assume that the curve along which the robot moves is closed and that it does not intersect or even touch itself except for the start and end points. The robot moves anti-clockwise around the building, so the area to be calculated lies to the left of the curve. It is known in advance that the whole polygon would fit into a square on the grid with a side length of 100 units.
For each scenario, you are given the number m, 3 <= m < 100, of movements of the robot in the first line. The following m lines contain pairs 揹x dy�of integers, separated by a single blank, satisfying .-100 <= dx, dy <= 100 and (dx, dy) != (0, 0). Such a pair means that the robot moves on to a grid point dx units to the right and dy units upwards on the grid (with respect to the current position). You can assume that the curve along which the robot moves is closed and that it does not intersect or even touch itself except for the start and end points. The robot moves anti-clockwise around the building, so the area to be calculated lies to the left of the curve. It is known in advance that the whole polygon would fit into a square on the grid with a side length of 100 units.
Output
The output for every scenario begins with a line containing 揝cenario #i:� where i is the number of the scenario starting at 1. Then print a single line containing I, E, and A, the area A rounded to one digit after the decimal point. Separate the three numbers by two single blanks. Terminate the output for the scenario with a blank line.
Sample Input
2 4 1 0 0 1 -1 0 0 -1 7 5 0 1 3 -2 2 -1 0 0 -3 -3 1 0 -3
Sample Output
Scenario #1: 0 4 1.0 Scenario #2: 12 16 19.0
Source
PIck 定理 面积=内部点数+边上点数(double)/2 -1
然后这题边上点数用gcd,面积用叉积,把每个点的坐标看成是向量(x,y),意义是从(0,0)到点(x,y) 构成的有向向量 ,相邻两个点求叉乘,最后算出的就是面积。 细细想来,这样算的时候会有多算的面积,但是在计算其他时候会有负的会正好削掉, 在纸上画画就会晓得了
#include <stdio.h>
#include <string.h>
#include <math.h>
#include <stdlib.h>
struct num
{
int x,y;
}map[10000];
int main()
{
int gcd(int x,int y);
int i,j,n,m,t,T=1,top,k;
int x,y,dx,dy,res1,res2,x1,y1,x2,y2;
double s;
scanf("%d",&t);
while(t--)
{
scanf("%d",&n);
top=0;
map[0].x=0; map[0].y=0;
top=1;
x=y=0;
for(i=0;i<=n-1;i++)
{
scanf("%d %d",&dx,&dy);
x+=dx; y+=dy;
if(x==0&&y==0)
{
continue;
}
map[top].x=x;
map[top++].y=y;
}
for(i=0,s=0;i<=top-1;i++)
{
x1=map[i].x;
y1=map[i].y;
x2=map[(i+1)%top].x;
y2=map[(i+1)%top].y;
s+=((double)(x1*y2-y1*x2))/2;
}
for(i=0,res2=0;i<=top-1;i++)
{
x1=map[i].x; y1=map[i].y;
x2=map[(i+1)%top].x; y2=map[(i+1)%top].y;
x=x2-x1; y=y2-y1;
if(x==0)
{
res2+=abs(y);
continue;
}
if(y==0)
{
res2+=abs(x);
continue;
}
res2+=gcd(abs(x),abs(y));
}
res1=(int)(s+1.0-(double)res2/2+0.01);
printf("Scenario #%d:\n",T++);
printf("%d %d %.1f\n",res1,res2,s);
printf("\n");
}
return 0;
}
int gcd(int x,int y)
{
return y==0? x:gcd(y,x%y);
}