自定义博客皮肤VIP专享

*博客头图:

格式为PNG、JPG,宽度*高度大于1920*100像素,不超过2MB,主视觉建议放在右侧,请参照线上博客头图

请上传大于1920*100像素的图片!

博客底图:

图片格式为PNG、JPG,不超过1MB,可上下左右平铺至整个背景

栏目图:

图片格式为PNG、JPG,图片宽度*高度为300*38像素,不超过0.5MB

主标题颜色:

RGB颜色,例如:#AFAFAF

Hover:

RGB颜色,例如:#AFAFAF

副标题颜色:

RGB颜色,例如:#AFAFAF

自定义博客皮肤

-+
  • 博客(44)
  • 收藏
  • 关注

原创 论文 :Hybrid Transfer Learning and BLS for Wearing Mask Detection in the COVID-19 Era

本文的目的是设计一种方法来检测戴口罩的人。给定一个输入图像,通过开发的深度迁移学习模型和广义学习系统(BLS)在输出图像中标记佩戴面具的区域。The metric IoU用于one box comparision。常用的指标包括用于统计分析的召回率、精度、F1和假率。交集over Union (IoU)通常用于比较predicted boxes 和 ground-truth boxes。为了实现这一目标,必须解决一些问题。本文主要贡献有以下几点。

2023-04-14 19:43:19 134 1

原创 论文 : Multi-Channel EEG Based Emotion Recognition Using TCN&BLS

Yin等[26]提出了一种基于多融合层的集成堆叠自编码器(MESAE)分类器,以去除不必要的噪声和学习特征表示。Yang et al[13]根据信道位置将四个频段的微分熵(DE)特征映射为维数为9×9×4的三维立方体,然后采用CNN对情绪进行分类。从图3可以看出,本文算法的性能优于对比方法,TCBLS的结果比最新文献的结果提高了3个百分点,在价态上达到99.5755%的平均精度,在唤醒上达到99.5781%的平均精度。此外,TCBLS的平均准确率比TCN高2个百分点,这反映了BLS对提高性能的积极意义。

2023-04-13 21:40:01 595

原创 论文 : Multi-Kernel Broad Learning systems Based on Random Features

本文提出了一种基于随机特征的多核BLS (MKBLS)算法。所提出的网络也可以看作是原始广义学习系统的非线性扩展,它只利用了输入数据的随机线性特征。在本节中,详细介绍了基于随机特征的多核广义学习系统(MKBLS)的前期工作和相关工作。

2023-04-13 19:24:27 372

原创 论文 Progressive Ensemble Kernel-Based Broad Learning System for Noisy Data Classification

K-RVFL对数据集的规模很敏感,当训练样本数量有限时,噪声数据的比例较高,这导致K-RVFL的结果不稳定。BLS在小数据集上更稳定,在小数据集上BLS的性能与K-RVFL相当。另一方面,KBLS在有噪声和具有挑战性的数据集上有更好的性能。比较了KBLS和PEKB与SVM(RBF), ML-KELM, K-RVFL, GBDT, Xgboost和BLS在十次运行中的平均精度和标准偏差。KBLS在21个数据集上获得了比BLS更好的性能,特别是在高维数据集上以及相对大规模的数据集上。因此,概化既不强也不鲁棒。

2023-04-13 16:06:36 248

原创 论文 Multi-scale 3D convolution feature-based Broad Learning System for Alzheimer’s Disease diagnosis

可以清楚地发现该模块在一定程度上可以注意到图像的整体结构,而忽略了一些结构的影响,如左右半球的链接部分。FMM侧重于获取图像的底层全局特征,可以有效提高轻量化结构模型的泛化性能,这也证明了FMM的有效性。如果相同结构的模型正常工作,则需要额外的参数,诊断性能会受到影响。本文提出的模型总体上可以与目前优秀的AD诊断算法保持相同的水平或具有一定的优势,并且模型的尺度也更加简洁。为了更直观地显示FMM特征的相关特征,采用t-SNE方法对不同模块的特征进行降维处理,从而显示数据分布。

2023-04-08 15:36:01 127

原创 论文 :Broad and deep neural network for high-dimensional data representation learning

对CIFAR10、CIFAR100、SVHN和模拟合成SVHN在内的高维数据集进行了大量的实验,以验证CCFEBLS模型。CCFEBLS变体可以用不同的构建块灵活地构建。

2023-04-07 11:55:13 135

原创 论文 Stacked Broad Learning System: From Incremental Flatted Structure to Deep Model

ivi​gui−1​)gvi​ui−1​Pi​Pj​Qi​Qj​Wyui​y(xi​yi​)y1​yv1​xWgu1​)v2gu1​)y2​y2​y−u1​ipiQP​gui−1​Wei​Wahi​)WaHi​。

2023-04-05 21:05:24 234

原创 Ch1 Introduction

Architecture VS. OrganizationComputer architectureA set of attributes visible to the programmer.Instruction setNumber of bits used for dataAddressing techniquesComputer organizationHow these attributes are implemented.Control signalsBus widthM

2022-03-06 15:10:48 94

原创 AI - Intelligent Agents

Intelligent AgentsAgents and EnvironmentsSensors & Actuators :Sensors : Perceiving its environment through sensors.Actuators : Acting upon that environment through actuatorsExamplesHuman agentSensors: eyes, Ears and other organsActuators:

2022-03-01 21:01:13 263

原创 Advanced Tree Structures

AVL TreeAVL TreeAn AVL (Adelson-Velskii and Landis) Tree is a binary search tree with a “balanced” conditionEvery node in the tree, the height of the left and right subtrees differ by at most 1(左子树和右子树高度最多相差1)调整BST为 AVL注意这里最后两种写反了。判断的时候是从出现问题的结点

2021-11-28 09:58:39 153

原创 Graphs

TerminologyPresentationsDirected Graph邻接矩阵&邻接表Undirected GraphAdjacency MatrixSpace: Θ(∣V∣2)Θ(|V|^2)Θ(∣V∣2)Adjacency ListSpace: Θ(∣V∣+∣E∣)Θ(|V| + |E|)Θ(∣V∣+∣E∣)ADTclass Graph { // Graph abstract class public: virtual int n() =0;

2021-11-27 17:49:15 451

原创 Indexing

IntroductionIndexing is a process of associating a key with the location of a corresponding data record(类似于查字典). Each key is associated with a pointer to a complete recordMight have several associated index files(一个指针可以指向多条记录)Index TypesPrimary Key

2021-11-24 21:37:34 125

原创 Searching

Sequential and List MethodUnsorted ListsSequential Search一个一个找Self-Organizing Lists : HeuristicsMove-to-FrontWhen a record is found, move it to the front of the list.每次找到一个就把这个放在最前面CountOrder by actual historical frequency of access. When a reco

2021-10-31 14:36:08 340

原创 Internal Sorting

Θ(n2) SortingBubble Sort从下往上逐渐把最小值浮上来,修改好的放在最上面template <class Elem, class Comp>void bubsort(Elem A[], int n) { for (int i=0; i<n-1; i++) for (int j=n-1; j>i; j--) if (Comp::lt(A[j], A[j-1])) swap(A, j, j-1);}比较次数是固定的,交换次数有极端值

2021-10-31 11:38:30 189

原创 Non-Binary Trees

Non-Binary TreesNon-Binary (General) TreeGeneral Tree : Any number of childADT每个节点记忆了它的第一个孩子和右边的节点template <class Elem> class GTNode { public: GTNode(const Elem&); // Constructor ~GTNode(); // Destructor Elem value(); // Return val

2021-10-26 17:16:40 153

原创 Binary Trees

Binary TreesIntroductionFull Binary TreeEach node being eitherLeafInternal node with exactly two non-empty children (有孩子必须有两个孩子)Complete Binary TreeIf the height of the tree is d, then all levels except possibly level d-1 arecompletely fullThe

2021-09-27 16:44:30 154

原创 算法刷题--位运算

Code 1 : Power of TwoGiven an integer n, return true if it is a power of two. Otherwise, return false.An integer n is a power of two, if there exists an integer x such that n == 2x.Example 1Input: n = 1Output: trueExplanation: 2^0 = 1Example 2Inpu

2021-09-21 11:27:21 179

原创 2021-09-07

Code 1 : Longest Substring Without Repeating CharactersGiven a string s, find the length of the longest substring without repeating characters.Example 1Input: s = "abcabcbb"Output: 3Explanation: The answer is "abc", with the length of 3.Example 2In

2021-09-20 21:05:39 56

原创 算法刷题--动态规划

Code 1 : climbing StairsYou are climbing a staircase. It takes n steps to reach the top.Each time you can either climb 1 or 2 steps. In how many distinct ways can you climb to the top?Example 1Input: n = 2Output: 2Explanation: There are two ways to c

2021-09-20 21:02:26 160

原创 算法刷题--广度优先搜索 / 深度优先搜索

Code 1 : Flood FillAn image is represented by an m x n integer grid image where image[i][j] represents the pixel value of the image.You are also given three integers sr, sc, and newColor. You should perform a flood fill on the image starting from the pix

2021-09-12 15:35:34 187

原创 算法刷题--滑动窗口

CODE 1 :Longest Substring Without Repeating CharactersGiven a string s, find the length of the longest substring without repeating characters.Example 1Input: s = "abcabcbb"Output: 3Explanation: The answer is "abc", with the length of 3.Example 2:In

2021-09-09 19:11:17 102

原创 算法刷题--双指针

Code 1Given an integer array nums sorted in non-decreasing order, return an array of the squares of each number sorted in non-decreasing order.Example 1Input: nums = [-4,-1,0,3,10]Output: [0,1,9,16,100]Explanation: After squaring, the array becomes [1

2021-09-05 17:08:50 206

原创 算法刷题--二分查找

Day 1Code 1 : Binary SearchGiven an array of integers nums which is sorted in ascending order, and an integer target, write a function to search target in nums. If target exists, then return its index. Otherwise, return -1.You must write an algorithm wi

2021-09-03 10:06:54 128

原创 Chapter3 Switching Algebra and Combinational Logic

Fundamental mathematical toolsBoolean Algebra and Truth Tables are essential important tools to express logical relationships .Truth Tables : Provides a listing of every possible combination of values of binary inputs to a digital circuit and the corres

2021-08-30 21:47:53 478

原创 Chapter1 Introduction

Types of Logic CircuitsLogic circuits are classified into two types, “combinational” and “sequential”Combinational logic circuit is one whose outputs depend only on its current inputs.The output of sequential logic circuits not only depends on current

2021-08-30 21:33:53 149

原创 2021-08-23

Code 1QuestionYou are given the root node of a binary search tree (BST) and a value to insert into the tree. Return the root node of the BST after the insertion. It is guaranteed that the new value does not exist in the original BST.Notice that there ma

2021-08-23 21:53:48 69

原创 2021-08-21

Code 1QuestionGiven the root of a binary tree, return the level order traversal of its nodes’ values. (i.e., from left to right, level by level).Example 1Input: root = [3,9,20,null,null,15,7]Output: [[3],[9,20],[15,7]]Example 2Input: root = [1]Out

2021-08-23 15:39:23 35

原创 2021-08-19

Code 1QuestionGiven the head of a singly linked list, reverse the list, and return the reversed list.Example 1Input: head = [1,2,3,4,5]Output: [5,4,3,2,1]Example 2Input: head = [1,2]Output: [2,1]Example 3Input: head = []Output: []Solution迭

2021-08-20 22:46:00 79

原创 2021-08-18

Code 1QuestionGiven a string s, find the first non-repeating character in it and return its index. If it does not exist, return -1.Example 1Input: s = "leetcode"Output: 0Example 2Input: s = "loveleetcode"Output: 2Example 3Input: s = "aabb"Outp

2021-08-19 22:16:17 54

原创 2021-08-17

Code 1QuestionGiven a non-negative integer x, compute and return the square root of x.Since the return type is an integer, the decimal digits are truncated, and only the integer part of the result is returned.Note: You are not allowed to use any built-

2021-08-17 22:16:12 83

原创 2021-08-16

Code 1QuestionYou are given an array prices where prices[i] is the price of a given stock on the ith day.You want to maximize your profit by choosing a single day to buy one stock and choosing a different day in the future to sell that stock.Return the

2021-08-16 17:30:46 208

原创 2021-08-15

Code 1QuestionGiven an integer array nums, return true if any value appears at least twice in the array, and return false if every element is distinct.Example 1Input: nums = [1,2,3,1]Output: trueExample 2Input: nums = [1,2,3,4]Output: falseExamp

2021-08-16 15:03:57 92

原创 数学建模聚类模型

聚类模型聚类就是将样本划分为由类似的对象组成的多个类的过程。聚类后,我们可以更加准确的在每个类中单独使用统计模型进行估计、分析或预测也可以探究不同类之间的相关性和主要差异。聚类和分类的区别是分类是已知类别的,聚类未知。K-means聚类算法步骤指定需要划分的簇的个数K值(类的个数)随机地选择K个数据对象作为初始的聚类中心(不一定要是样本点)计算其余的各个数据对象到这K个初始聚类中心的距离,把数据对象划归到距离它最近的那个中心所处在的簇类中。调整新类并且重新计算出新类的中心。(通常是重心)

2021-08-10 23:00:03 1032

原创 图论最短路径问题

图论最短路径问题本讲将简要介绍图论中的基本概念,并主要讲解图论中的最短路径问题。根据图的不同,将学习两种不同的算法:迪杰斯特拉Dijkstra算法图的基本概念两种画图方法一个画图的网站(推荐使用)MATLAB画图% 函数graph(s,t):可在 s 和 t 中的对应节点之间创建边,并生成一个图G1 = graph(s1, t1);plot(G1)% 函数graph(s,t,w):可在 s 和 t 中的对应节点之间以w的权重创建边,并生成一个图G2 = graph(s2, t2)

2021-08-10 12:21:27 139

原创 多元线性回归分析

多元线性回归分析回归分析是数据分析中最基础也是最重要的分析工具,绝大多数的数据分析问题,都可以使用回归的思想来解决。回归分析的任务就是,通过研究自变量X和因变量Y的相关关系,尝试去解释Y的形成机制,进而达到通过X去预测Y的目的。常见的回归分析有五类:线性回归、0‐1回归、定序回归、计数回归和生存回归,其划分的依据是因变量Y的类型。本讲主要学习线性回归。多元线性回归分析相关性通过回归分析,研究相关关。相关性不等于因果性。XX是用来解释Y的相关变量,所以X被称为自变量。YY常常是我们需要研究

2021-08-08 17:53:57 8824 1

原创 典型相关分析

典型相关分析典型相关分析(Canonical Correlation analysis)研究两组变量(每组变量中都可能有多个指标)之间相关关系的一种多元统计方法。它能够揭示出两组变量之间的内在联系。基本原理在每组变量中找出变量的线性组合,使得两组的线性组合之间具有最大的相关系数(这一步的目的是把一组变量综合起来)选取和最初挑选的这对线性组合不相关的线性组合,使其配对,并选取相关系数最大的一对。如此继续下去,直到两组变量之间的相关性被提取完毕为止。被选出的线性组合配对称为典型变量,它们的相关系数称

2021-08-06 18:10:15 1777

原创 数学建模相关系数

相关系数本文介绍两种最为常用的相关系数:皮尔逊pearson相关系数和斯皮尔曼spearman等级相关系数。它们可用来衡量两个变量之间的相关性的大小,根据数据满足的不同条件,我们要选择不同的相关系数进行计算和分析(建模论文中最容易用错的方法)。描述性统计使用MATLABMIN = min(Test); % 每一列的最小值MAX = max(Test); % 每一列的最大值MEAN = mean(Test); % 每一列的均值MEDIAN = median(Test); %每一列的中位数S

2021-08-05 18:26:40 1281

原创 拟合算法

拟合算法与插值问题不同,在拟合问题中不需要曲线一定经过给定的点。拟合问题的目标是寻求一个函数(曲线),使得该曲线在某种准则下与所有的数据点最为接近,即曲线拟合的最好(最小化损失函数)。插值和拟合的区别插值算法中,得到的多项式f(x)要经过所有样本点。拟合算法得到的曲线不能经过每一个样本点,但只要保证误差足够小即可,这就是拟合的思想。(拟合的结果是得到一个确定的曲线)。最小二乘法y^i=kxi+b\hat{y}_i=kx_i+by^​i​=kxi​+bk^,b^=argmin(∑i=1n(y

2021-08-04 15:33:55 372

原创 数学建模插值算法

插值算法数模比赛中,常常需要根据已知的函数点进行数据、模型的处理和分析,而有时候现有的数据是极少的,不足以支撑分析的进行,这时就需要使用一些数学的方法,“模拟产生”一些新的但又比较靠谱的值来满足需求,这就是插值的作用。插值法定义设函数y=f(x)y=f (x)y=f(x) 在区间[a,b][ a , b ][a,b]上有定义,且已知在点a≤x0<x1<...<xn≤ba ≤ x_0 < x_1 < . . . < x_n ≤ ba≤x0​<x1​<...

2021-08-03 14:04:59 465

原创 层次分析法(AHP))

层次分析法(The analytic hierarchy process, 简称AHP)建模比赛中最基础的模型之一,其主要用于解决评价类问题(例如:选择哪种方案最好、哪位运动员或者员工表现的更优秀)层次分析法第一步分析系统中各因素之间的关系,建立系统的递阶层次结构。考虑以下三个问题 :我们评价的目标是什么?我们为了达到这个目标有哪几种可选的方案?评价的准则或者说指标是什么?(我们根据什么东西来评价好坏)层次分析法第二步对于同一层次的各元素关于上一层次中某一准则的重要性进行两两比较

2021-08-02 13:35:20 1674

空空如也

空空如也

TA创建的收藏夹 TA关注的收藏夹

TA关注的人

提示
确定要删除当前文章?
取消 删除