LAN9252/3 EtherCAT module

LAN9252/3 EtherCAT module//

LAN9252&LAN9253模块,SPI转EtherCAT module 参考设计+源码+技术支持,有需求的留言我。QQ:1048643578
提供完整解决方案。SPI转EtherCAT小模块,源代码+参考设计+技术支持,需要的请留言!

LAN9252/3 is a 2/3-port EtherCAT slave controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers

 

LAN9252/3 is a 2/3-port EtherCAT slave controller with 3 Fieldbus Memory Management Units (FMMUs) and 4 SyncManagers

• Interfaces to most 8/16-bit embedded controllers and 32-bit embedded controllers with an 8/16-bit bus

• Integrated Ethernet PHYs with HP Auto-MDIX

• Wake on LAN (WoL) support

• Low power mode allows systems to enter sleep mode until addressed by the Master

• Cable diagnostic support

• 1.8V to 3.3V variable voltage I/O

• Integrated 1.2V regulator for single 3.3V operation

• Low pin count and small body size package

 

TABLE OF CONTENTS

  1. Key benefits?
  2. Target Applications
  3. Pinout diagram
  4. Jumpers and settings
  5. LEDs and buttons
  6. Software support
  7. Third party support
  8. Downloads

key Benefits?

• Integrated high-performance 100Mbps Ethernet transceivers - Compliant with IEEE 802.3/802.3u (Fast Ethernet) - 100BASE-FX support via external fiber transceiver - Loop-back modes - Automatic polarity detection and correction - HP Auto-MDIX

• EtherCAT slave controller - Supports 3 FMMUs - Supports 4 SyncManagers - Distributed clock support allows synchronization with other EtherCAT devices - 4K bytes of DPRAM

• 8/16-Bit Host Bus Interface - Indexed register or multiplexed bus - Allows local host to enter sleep mode until addressed by EtherCAT Master - SPI / Quad SPI support

• Digital I/O Mode for optimized system cost

• 3rd port for flexible network configurations

• Comprehensive power management features - 3 power-down levels - Wake on link status change (energy detect) - Magic packet wakeup, Wake on LAN (WoL), wake on broadcast, wake on perfect DA - Wakeup indicator event signal

• Power and I/O - Integrated power-on reset circuit - Latch-up performance exceeds 150mA per EIA/JESD78, Class II - JEDEC Class 3A ESD performance - Single 3.3V power supply (integrated 1.2V regulator)

• Additional Features - Multifunction GPIOs - Ability to use low cost 25MHz crystal for reduced BOM

• Packaging - Pb-free RoHS compliant 64-pin QFN or 64-pin TQFPEP

• Available in commercial, industrial, and extended industrial* temp. ranges

Target Applications

• Motor Motion Control

• Process/Factory Automation

• Communication Modules, Interface Cards

• Sensors

• Hydraulic & Pneumatic Valve Systems

• Operator Interfaces

 

PINOUT DIAGRAM

This table shows how the pinout on LAN9252/3 Pro.

LAN9253 the details of PIN description, Pls refer Datasheet Page12 LAN9253 datasheet

LAN9252 the details of PIN description, Pls refer Datasheet Page12 LAN9252 datasheet

The LAN9252/3 EtherCAT module PIN description as following:

 

PIN

Notes

PIN

Notes

PIN

Notes

1

GPIO0

2

GPIO1

CS

Chip select

3

GPIO2

4

GPIO3

SCK

SPI Clock

5

GPIO4

6

GPIO5

MISO

SPI data OP

7

GPIO6

8

GPIO7

MOSI

SPI data IP

9

GPIO8

10

GPIO9

IRQ

IRQ

11

GPIO10

12

GPIO11

RST

Reset

13

GPIO12

14

GPIO13

+3.3V

Power supply

15

GPIO14

16

GPIO15

GND

Ground

17

SYNC0

18

SYNC1

 

 

 

 

ADDITIONAL PINS

CHIP MODE SELECTION

 

Jumper settings as following:

 

LEDS AND BUTTONS

Designator

Name

Type

Description

D1

D1

INDICATOR

INDICATOR

SOFTWARE SUPPORT

We provide a library for the LAN9252/3 Pro on Microchip page:for LAN9252

 https://www.microchip.com/wwwproducts/en/LAN9252

for LAN9253 https://www.microchip.com/wwwproducts/en/LAN9253

as well as a demo application (example), developed using. The demo can run on all the mainboard.

DOWNLOADS

Pls Press Ctrl+click to enter the link

 

LAN9252 datasheet

LAN9252 all Doc

LAN9252 reference design

LAN9252 Driver

LAN9253 datasheet

LAN925x family Doc

LAN9253 all Doc

LAN9253 reference design

LAN9252 & LAN9253 compare

LAN9253 Driver

Third party support

Driver support:

https://github.com/MicrochipTech/ethercat-software-framework

https://download.csdn.net/download/weixin_41740665/10914039

链接:https://pan.baidu.com/s/1LYyLEkbiOvv2sJ5vqb8MrQ

提取码:89ac

 

  • 3
    点赞
  • 14
    收藏
    觉得还不错? 一键收藏
  • 1
    评论
lan9252 ethcat 402 是一种用于开发的网络通信模块。它是基于LAN9252EtherCAT 402协议的组合,用于实现高性能的实时数据传输和控制。这个模块是面向工业自动化和机器人控制等领域的开发者设计的。 首先,lan9252是一种高性能以太网控制器,提供了可靠的以太网通信功能。它支持多种通信协议,例如以太网/IP、UDP、TCP等,可以满足不同应用的通信需求。同时,lan9252还具备良好的抗干扰能力和稳定性,保证了数据的可靠传输。 而EtherCAT 402是一种用于实时控制的通信协议。其特点是具备高实时性和灵活性,能够满足对控制精度要求较高的应用场景。该协议基于以太网技术,通过分布式时钟同步和数据通信机制,实现了高效的数据传输和实时控制。同时,EtherCAT 402还支持多重节点以及主从节点的架构,便于开发者进行系统设计和调试。 综合刚才的介绍,lan9252 ethcat 402开发是指在此硬件模块的基础上进行应用开发。开发者可以利用lan9252提供的以太网功能,实现设备之间的数据通信和控制功能。同时,通过EtherCAT 402协议的支持,可以实现高实时性和灵活性的控制要求。开发者可以根据具体应用需求,设计和开发适应的网络通信和控制方案。 总的来说,lan9252 ethcat 402开发是在硬件模块的基础上进行网络通信和控制应用开发的过程。该模块具备可靠的以太网通信功能和高实时性的控制能力,适用于工业自动化和机器人控制等领域。开发者可以根据具体需求,灵活使用lan9252 ethcat 402进行应用开发。

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 1
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值