Microchip CAN FD产品介绍----MCP2518FD - Interface- Controller Area Network (CAN)

MCP2518FD

External CAN FD Controller with SPI Interface

Summary

The MCP2518FD is a cost-effective and small-footprint External CAN FD Controller that can be easily added to a microcontroller with an available SPI interface.  Therefore, a CAN FD channel can be easily added to a microcontroller that is either lacking a CAN FD peripheral or that doesn't have enough CAN FD channels.

The MCP2518FD supports both CAN frames in the Classical format (CAN 2.0B) and CAN Flexible Data Rate (CAN FD) format as specified in ISO11898-1:2015.

Please see our MikroElektronika click Board! https://shop.mikroe.com/mcp2518fd-click

Please see our functional safety feature page CAN/CAN FD

Additional Features

• Conforms to ISO11898-1:2015

  • Supports both CAN 2.0B and CAN FD

  • Arbitration Bit Rate up to 1 Mbps

  • Data Bit Rate up to 8 Mbps

  • Up to 20MHz SPI Clock Speed

• Flexible FIFO setup

  • 31 FIFOs configurable as transmit or receive

  • 32 Flexible Filter and Mask Objects

  • One Transmit Queue

• Misc

  • 32-bit Time Stamp

  • Bus Health Diagnostics and Error Counters

  • Temperature Range: -40°C to +150°C

  • Packages: VDFN14 (Wettable Flanks), SOIC14

• Low power consumption

  • Low power mode current: 10uA, Max

  • VDD: 2.7V-5.5V

  • Active Current Max: 12mA @ 5.5V, 40 MHz CAN Clock

• Built-In Safety features

  • Loopback mode

  • SPI commands with CRC to detect noise on SPI interface

  • ECC for the SRAM 1 bit correction, 2 bit detection

CAN FD开发板请联系QQ:1048643578,开发板+资料+源码+技术支持。