yolov8+tensorRt 实力分割

model=yolov8n.ymal 使用正常版本 model=yolov8n-p2.ymal 小目标检测版本 model=yolov8n-p6.ymal 高分辨率版本
pt文件下载地址：
https://github.com/ultralytics/assets/releases

训练结果截图，可以看到输入和输出及onnx opset cuda python torch 等版本和检测时间。

用Netron打开yolov8n-seg.onnx可以看到模型的输入和输出

输入节点名字：“images”；数据：float32[1,3,1280,1280]
【这里特殊强调一点：csdn有些文章里是和这里不一样的，“output0”；数据：float32[1,116,8400]，116 = 4+80+32，4为box的cx cy w h，80是每个类的置信度，32是分割需要用到的】
输出节点1的名字：“output0”；数据：float32[1,37,33600]。其中37（37 = 4 + 1 + 32）； 4为box的cx cy w h，1是每个类的置信度，32是分割需要用到的，用于计算掩膜数据。

输出节点2的名字：“output1”；数据：float32[1,32,160,160]。output0后32个字段与output1的数据做矩阵乘法后得到的结果，即为对应目标的掩膜数据。

检测效果如上，25ms

附：https://blog.csdn.net/qq_41043389/article/details/128682057

// onnx生成engine--补充了内存释放
#include <iostream>
#include "logging.h"
#include "NvOnnxParser.h"
#include "NvInfer.h"
#include <fstream>

using namespace nvinfer1;
using namespace nvonnxparser;

static Logger gLogger;
int main(int argc,char** argv) {
	if (argc < 2) {
		argv[1] = "E:/firefoxDown/yolov8-instance-seg-tensorrt-main/build/best_cu102_rail.onnx";
		argv[2] = "yolov8s_blob_best_rail.engine";
	}
	// 1 onnx解析器
	IBuilder* builder = createInferBuilder(gLogger);
	const auto explicitBatch = 1U << static_cast<uint32_t>(NetworkDefinitionCreationFlag::kEXPLICIT_BATCH);
	INetworkDefinition* network = builder->createNetworkV2(explicitBatch);
nvonnxparser::IParser* parser = nvonnxparser::createParser(*network, gLogger);
	const char* onnx_filename = argv[1];
	parser->parseFromFile(onnx_filename, static_cast<int>(Logger::Severity::kWARNING));
	for (int i = 0; i < parser->getNbErrors(); ++i)
	{
		std::cout << parser->getError(i)->desc() << std::endl;
	}
	std::cout << "successfully load the onnx model" << std::endl;
	// 2build the engine
	unsigned int maxBatchSize = 1;
	builder->setMaxBatchSize(maxBatchSize);
	IBuilderConfig* config = builder->createBuilderConfig();
	config->setMaxWorkspaceSize(1 << 20);
	//config->setMaxWorkspaceSize(128 * (1 << 20));  // 16MB
	config->setFlag(BuilderFlag::kFP16);
	ICudaEngine* engine = builder->buildEngineWithConfig(*network, *config);
	// 3serialize Model
	IHostMemory *gieModelStream = engine->serialize();
	std::ofstream p(argv[2], std::ios::binary);
	if (!p)
	{
		std::cerr << "could not open plan output file" << std::endl;
		return -1;
	}
	p.write(reinterpret_cast<const char*>(gieModelStream->data()), gieModelStream->size());
	gieModelStream->destroy();
	std::cout << "successfully generate the trt engine model" << std::endl;
	parser->destroy();
	engine->destroy();
	network->destroy();
	builder->destroy();
	return 0;
}

// 推理：请根据自己onnx结构进行参数调整

#include "NvInfer.h"
#include "cuda_runtime_api.h"
#include "NvInferPlugin.h"
#include "logging.h"
#include <opencv2/opencv.hpp>
#include "utils.h"
#include <string>
using namespace nvinfer1;
using namespace cv;

// stuff we know about the network and the input/output blobs
static const int INPUT_H = 640*2;
static const int INPUT_W = 640*2;
static const int _segWidth = 160*2;
static const int _segHeight = 160*2;
static const int _segChannels = 32;
static const int CLASSES = 1;//80
static const int Num_box = 33600;// 8400;
static const int OUTPUT_SIZE = Num_box * (CLASSES+4 + _segChannels);//output0
static const int OUTPUT_SIZE1 = _segChannels * _segWidth * _segHeight ;//output1


static const float CONF_THRESHOLD = 0.1;
static const float NMS_THRESHOLD = 0.5;
static const float MASK_THRESHOLD = 0.5;
const char* INPUT_BLOB_NAME = "images";
const char* OUTPUT_BLOB_NAME = "output0";//detect
const char* OUTPUT_BLOB_NAME1 = "output1";//mask

//
#define fengeflag

struct OutputSeg {
	int id;             //结果类别id
	float confidence;   //结果置信度
	cv::Rect box;       //矩形框
	cv::Mat boxMask;       //矩形框内mask，节省内存空间和加快速度
};

void DrawPred(Mat& img,std:: vector<OutputSeg> result) {
	//生成随机颜色
	std::vector<Scalar> color;
	srand(time(0));
	for (int i = 0; i < CLASSES; i++) {
		int b = rand() % 256;
		int g = rand() % 256;
		int r = rand() % 256;
		color.push_back(Scalar(b, g, r));
	}
	Mat mask = img.clone();
	for (int i = 0; i < result.size(); i++) {
		int left, top;
		left = result[i].box.x;
		top = result[i].box.y;
		int color_num = i;
		rectangle(img, result[i].box, color[result[i].id], 2, 8);
		
		mask(result[i].box).setTo(color[result[i].id], result[i].boxMask);
		char label[100];
		sprintf(label, "%d:%.2f", result[i].id, result[i].confidence);

		//std::string label = std::to_string(result[i].id) + ":" + std::to_string(result[i].confidence);
		int baseLine;
		Size labelSize = getTextSize(label, FONT_HERSHEY_SIMPLEX, 0.5, 1, &baseLine);
		top = max(top, labelSize.height);
		putText(img, label, Point(left, top), FONT_HERSHEY_SIMPLEX, 1, color[result[i].id], 2);
	}
	
	addWeighted(img, 0.5, mask, 0.8, 1, img); //将mask加在原图上面

	
}



static Logger gLogger;
void doInference(IExecutionContext& context, float* input, float* output, float* output1, int batchSize,bool fengeFlag)
{
    const ICudaEngine& engine = context.getEngine();

    // Pointers to input and output device buffers to pass to engine.
    // Engine requires exactly IEngine::getNbBindings() number of buffers.
    assert(engine.getNbBindings() == 3);
    void* buffers[3];

    // In order to bind the buffers, we need to know the names of the input and output tensors.
    // Note that indices are guaranteed to be less than IEngine::getNbBindings()
    const int inputIndex = engine.getBindingIndex(INPUT_BLOB_NAME);
	const int outputIndex = engine.getBindingIndex(OUTPUT_BLOB_NAME);
	int outputIndex1 = 0;
	if (fengeFlag) outputIndex1 = engine.getBindingIndex(OUTPUT_BLOB_NAME1);

    // Create GPU buffers on device
    CHECK(cudaMalloc(&buffers[inputIndex], batchSize * 3 * INPUT_H * INPUT_W * sizeof(float)));//
	CHECK(cudaMalloc(&buffers[outputIndex], batchSize * OUTPUT_SIZE * sizeof(float)));
	if (fengeFlag) CHECK(cudaMalloc(&buffers[outputIndex1], batchSize * OUTPUT_SIZE1 * sizeof(float)));
	// cudaMalloc分配内存 cudaFree释放内存 cudaMemcpy或 cudaMemcpyAsync 在主机和设备之间传输数据
	// cudaMemcpy cudaMemcpyAsync 显式地阻塞传输 显式地非阻塞传输 
    // Create stream
    cudaStream_t stream;
    CHECK(cudaStreamCreate(&stream));

    // DMA input batch data to device, infer on the batch asynchronously, and DMA output back to host
    CHECK(cudaMemcpyAsync(buffers[inputIndex], input, batchSize * 3 * INPUT_H * INPUT_W * sizeof(float), cudaMemcpyHostToDevice, stream));
    context.enqueue(batchSize, buffers, stream, nullptr);
	CHECK(cudaMemcpyAsync(output, buffers[outputIndex], batchSize * OUTPUT_SIZE * sizeof(float), cudaMemcpyDeviceToHost, stream));
	if (fengeFlag) CHECK(cudaMemcpyAsync(output1, buffers[outputIndex1], batchSize * OUTPUT_SIZE1 * sizeof(float), cudaMemcpyDeviceToHost, stream));
	cudaStreamSynchronize(stream);

    // Release stream and buffers
    cudaStreamDestroy(stream);
    CHECK(cudaFree(buffers[inputIndex]));
	CHECK(cudaFree(buffers[outputIndex]));
	if (fengeFlag) CHECK(cudaFree(buffers[outputIndex1]));
}


int main(int argc, char** argv)
{
	if (argc < 2) {
		argv[1] = "E:/firefoxDown/yolov8-instance-seg-tensorrt-main/gitupdate/yolov8-TensorRT/build/yolov8s_blob_best_rail.engine";
		argv[2] = "E:/E/testyolo/rail_data/images/val/rail_10.jpg";
	}
	// create a model using the API directly and serialize it to a stream
	char* trtModelStream{ nullptr }; //char* trtModelStream==nullptr;  开辟空指针后 要和new配合使用，比如89行 trtModelStream = new char[size]
	size_t size{ 0 };//与int固定四个字节不同有所不同,size_t的取值range是目标平台下最大可能的数组尺寸,一些平台下size_t的范围小于int的正数范围,又或者大于unsigned int. 使用Int既有可能浪费，又有可能范围不够大。

	std::ifstream file(argv[1], std::ios::binary);
	if (file.good()) {
		std::cout << "load engine success" << std::endl;
		file.seekg(0, file.end);//指向文件的最后地址
		size = file.tellg();//把文件长度告诉给size

		file.seekg(0, file.beg);//指回文件的开始地址
		trtModelStream = new char[size];//开辟一个char 长度是文件的长度
		assert(trtModelStream);
		file.read(trtModelStream, size);//将文件内容传给trtModelStream
		file.close();//关闭
	}
	else {
		std::cout << "load engine failed" << std::endl;
		return 1;
	}

	
	Mat src = imread(argv[2], 1);
	if (src.empty()) { std::cout << "image load faild" << std::endl; return 1; }
	int img_width = src.cols;
	int img_height = src.rows;
	// Subtract mean from image
	static float data[3 * INPUT_H * INPUT_W];
	Mat pr_img0, pr_img;
	std::vector<int> padsize;
	pr_img = preprocess_img(src, INPUT_H, INPUT_W, padsize);  // Resize
	int newh = padsize[0], neww = padsize[1], padh = padsize[2], padw = padsize[3];
	float ratio_h = (float)src.rows / newh;
	float ratio_w = (float)src.cols / neww;
	int i = 0;// [1,3,INPUT_H,INPUT_W]
	for (int row = 0; row < INPUT_H; ++row) {
		uchar* uc_pixel = pr_img.data + row * pr_img.step;//pr_img.step=widthx3 就是每一行有width个3通道的值
		for (int col = 0; col < INPUT_W; ++col)
		{
			data[i] = (float)uc_pixel[2] / 255.0;
			data[i + INPUT_H * INPUT_W] = (float)uc_pixel[1] / 255.0;
			data[i + 2 * INPUT_H * INPUT_W] = (float)uc_pixel[0] / 255.;
			uc_pixel += 3;
			++i;
		}
	}

	IRuntime* runtime = createInferRuntime(gLogger);
	assert(runtime != nullptr);
	bool didInitPlugins = initLibNvInferPlugins(nullptr, "");
	ICudaEngine* engine = runtime->deserializeCudaEngine(trtModelStream, size, nullptr);
	assert(engine != nullptr);
	IExecutionContext* context = engine->createExecutionContext();
	assert(context != nullptr);
	delete[] trtModelStream;

	// Run inference
	static float prob[OUTPUT_SIZE];
	static float prob1[OUTPUT_SIZE1];

	auto start = std::chrono::system_clock::now();
	doInference(*context, data, prob, prob1, 1,true);
	auto end = std::chrono::system_clock::now();
	//std::cout << "推理时间：" << std::chrono::duration_cast<std::chrono::milliseconds>(end - start).count() << "ms" << std::endl;
	std::vector<int> classIds;//结果id数组
	std::vector<float> confidences;//结果每个id对应置信度数组
	std::vector<cv::Rect> boxes;//每个id矩形框
	std::vector<cv::Mat> picked_proposals;  //后续计算mask

	// 处理box
	int net_length = CLASSES + 4 + _segChannels;
	cv::Mat out1 = cv::Mat(net_length, Num_box, CV_32F, prob);

	start = std::chrono::system_clock::now();
	for (int i = 0; i < Num_box; i++) {
		//输出是1*net_length*Num_box;所以每个box的属性是每隔Num_box取一个值，共net_length个值
		cv::Mat scores = out1(Rect(i, 4, 1, CLASSES)).clone();
		Point classIdPoint;
		double max_class_socre;
		minMaxLoc(scores, 0, &max_class_socre, 0, &classIdPoint);
		max_class_socre = (float)max_class_socre;
		if (max_class_socre >= CONF_THRESHOLD) {
			cv::Mat temp_proto = out1(Rect(i, 4 + CLASSES, 1, _segChannels)).clone();
			picked_proposals.push_back(temp_proto.t());
			float x = (out1.at<float>(0, i) - padw) * ratio_w;  //cx
			float y = (out1.at<float>(1, i) - padh) * ratio_h;  //cy
			float w = out1.at<float>(2, i) * ratio_w;  //w
			float h = out1.at<float>(3, i) * ratio_h;  //h
			int left = MAX((x - 0.5 * w), 0);
			int top = MAX((y - 0.5 * h), 0);
			int width = (int)w;
			int height = (int)h;
			if (width <= 0 || height <= 0) { continue; }

			classIds.push_back(classIdPoint.y);
			confidences.push_back(max_class_socre);
			boxes.push_back(Rect(left, top, width, height));
		}

	}
	//执行非最大抑制以消除具有较低置信度的冗余重叠框（NMS）
	std::vector<int> nms_result;
	cv::dnn::NMSBoxes(boxes, confidences, CONF_THRESHOLD, NMS_THRESHOLD, nms_result);
	std::vector<cv::Mat> temp_mask_proposals;
	std::vector<OutputSeg> output;
	Rect holeImgRect(0, 0, src.cols, src.rows);
	for (int i = 0; i < nms_result.size(); ++i) {
		int idx = nms_result[i];
		OutputSeg result;
		result.id = classIds[idx];
		result.confidence = confidences[idx];
		result.box = boxes[idx]& holeImgRect;
		output.push_back(result);
		temp_mask_proposals.push_back(picked_proposals[idx]);
	}

	// 处理mask
	Mat maskProposals;
	for (int i = 0; i < temp_mask_proposals.size(); ++i)
		maskProposals.push_back(temp_mask_proposals[i]);

	Mat protos = Mat(_segChannels, _segWidth * _segHeight, CV_32F, prob1);
	Mat matmulRes = (maskProposals * protos).t();//n*32 32*25600 A*B是以数学运算中矩阵相乘的方式实现的，要求A的列数等于B的行数时
	Mat masks = matmulRes.reshape(output.size(), { _segWidth,_segHeight });//n*160*160

	std::vector<Mat> maskChannels;
	cv::split(masks, maskChannels);
	Rect roi(int((float)padw / INPUT_W * _segWidth), int((float)padh / INPUT_H * _segHeight), int(_segWidth - padw / 2), int(_segHeight - padh / 2));
	for (int i = 0; i < output.size(); ++i) {
		Mat dest, mask;
		cv::exp(-maskChannels[i], dest);//sigmoid
		dest = 1.0 / (1.0 + dest);//
		dest = dest(roi);
		resize(dest, mask, cv::Size(src.cols, src.rows), INTER_NEAREST);
		//crop----截取box中的mask作为该box对应的mask
		Rect temp_rect = output[i].box;
		mask = mask(temp_rect) > MASK_THRESHOLD;
		output[i].boxMask = mask;
	}
	end = std::chrono::system_clock::now();
	std::cout << "后处理时间：" << std::chrono::duration_cast<std::chrono::milliseconds>(end - start).count() << "ms" << std::endl;

	DrawPred(src, output);
	imwrite("dest.bmp", src);
	cv::imshow("output.jpg", src);
	char c = cv::waitKey(0);
	
	// Destroy the engine
    context->destroy();
    engine->destroy();
    runtime->destroy();

    return 0;
}