先贴出dts全文(内核linux4.19.222)
分两个文件-一个是s5pv210-smdkv210.dts
另个一是s5pv210.dtsi
第一个dts
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's S5PV210 SoC device tree source
*
* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
*
* Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
* Tomasz Figa <t.figa@samsung.com>
*
* Board device tree source for YIC System SMDV210 board.
*
* NOTE: This file is completely based on original board file for mach-smdkv210
* available in Linux 3.15 and intends to provide equivalent level of hardware
* support. Due to lack of hardware, _no_ testing has been performed.
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "s5pv210.dtsi"
/ {
model = "YIC System SMDKV210 based on S5PV210";
compatible = "yic,smdkv210", "samsung,s5pv210";
chosen {
bootargs = "console=ttySAC0,115200n8 root=/dev/nfs nfsroot=192.168.88.8:/home/zhi/s5pv210/rootfs,v3 rw ip=192.168.88.123:192.168.88.8:192.168.88.1:255.255.255.0::eth0:off rw root wait ignore_loglevel earlyprintk"; //"console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk";
};
memory@30000000 {
device_type = "memory";
reg = <0x30000000 0x20000000>;
};
/*
ethernet@88000000 {
compatible = "davicom,dm9000";
reg = <0x88000000 0x2 0x88000004 0x2>;
interrupt-parent = <&gph0>;
interrupts = <7 4>;
local-mac-address = [50 60 de ad be ef];
davicom,no-eeprom;
clocks = <&clocks CLK_SROMC>;
clock-names = "sromc";
};
*/
backlight {
compatible = "pwm-backlight";
pwms = <&pwm 3 5000000 0>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
pinctrl-names = "default";
pinctrl-0 = <&pwm3_out>;
};
/*
srom-cs2@e8000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0xe8000000 0x80>;
ranges;
nand: nand@B0E00000 {
compatible = "samsung,s5pv210-nand";
reg = <0xb0e00000 0x2000>,
interrupt-parent = <&vic1>;
interrupts = <31>;
clocks = <&clocks CLK_SROMC>;
clock-names = "nand";
#address-cells = <1>;
#size-cells = <1>;
status = "okay"; // "disabled";
};
};
*/
};
&xusbxti {
clock-frequency = <24000000>;
};
&xxti {
clock-frequency = <24000000>;
};
&pinctrl0 {
srom_ctl: srom-ctl {
samsung,pins = "mp01-1", "mp01-6",
"mp01-7", "mp02-2";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
srom_ebi: srom-ebi {
samsung,pins = "mp04-0", "mp04-1", "mp04-2", "mp04-3",
"mp04-4", "mp04-5", "mp04-6", "mp04-7",
"mp05-0", "mp05-1", "mp05-2", "mp05-3",
"mp05-4", "mp05-5", "mp05-6", "mp05-7",
"mp06-0", "mp06-1", "mp06-2", "mp06-3",
"mp06-4", "mp06-5", "mp06-6", "mp06-7",
"mp07-0", "mp07-1", "mp07-2", "mp07-3",
"mp07-4", "mp07-5", "mp07-6", "mp07-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
nandc_ctl: nandc-ctl {
samsung,pins = "mp01-2", "mp03-0", "mp03-1",
"mp03-2", "mp03-3", "mp03-4";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
nandc_ebi: nandc-ebi {
samsung,pins =
"mp06-0", "mp06-1", "mp06-2", "mp06-3",
"mp06-4", "mp06-5", "mp06-6", "mp06-7";
samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
&sromc {
pinctrl-names = "default";
pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
status = "okay";
ethernet@1,0 {
compatible = "davicom,dm9000";
reg = <1 0 2 /* addr */
1 4 2>; /* data */
interrupt-parent = <&gph0>;
interrupts = <7 4>;
local-mac-address = [50 60 de ad be ef];
davicom,no-eeprom;
reg-io-width = <2>; //16位模式
samsung,waitable;
samsung,srom-timing = <0 0 1 3 1 0>;
};
};
&nandc {
status = "okay"; // "disabled";
samsung,nandc-tacls=<1>;
samsung,nandc-twrph0=<2>;
samsung,nandc-twrph1=<1>;
nand@0 {
nand-ecc-step-size = <512>; //每页2k，每512字节生成ecc，需要16自己存储
nand-ecc-strength = <8>; //最大8bit的纠错位数，每页需要64字节的oob存储
nand-ecc-mode = "hw";
nand-on-flash-bbt;
nand-is-boot-medium;
nand-bus-width = <8>;
pinctrl-names = "default";
pinctrl-0 = <&nandc_ctl>, <&nandc_ebi>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0xc0000 >;
};
partition@c0000 {
label = "u-boot-env";
reg = <0xc0000 0x40000>;
};
partition@100000 {
label = "dtb";
reg = <0x100000 0x080000>;
};
partition@180000 {
label = "kernel";
reg = <0x180000 0x500000>;
};
partition@680000 {
label = "rootfs";
reg = <0x680000 0x3f980000 >; //最大1G
};
};
};
};
&keypad {
linux,input-no-autorepeat;
wakeup-source;
samsung,keypad-num-rows = <8>;
samsung,keypad-num-columns = <8>;
pinctrl-names = "default";
pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
<&keypad_row3>, <&keypad_row4>, <&keypad_row5>,
<&keypad_row6>, <&keypad_row7>,
<&keypad_col0>, <&keypad_col1>, <&keypad_col2>,
<&keypad_col3>, <&keypad_col4>, <&keypad_col5>,
<&keypad_col6>, <&keypad_col7>;
status = "okay";
key_1 {
keypad,row = <0>;
keypad,column = <3>;
linux,code = <KEY_1>;
};
key_2 {
keypad,row = <0>;
keypad,column = <4>;
linux,code = <KEY_2>;
};
key_3 {
keypad,row = <0>;
keypad,column = <5>;
linux,code = <KEY_3>;
};
key_4 {
keypad,row = <0>;
keypad,column = <6>;
linux,code = <KEY_4>;
};
key_5 {
keypad,row = <0
>;
keypad,column = <7>;
linux,code = <KEY_5>;
};
key_6 {
keypad,row = <1>;
keypad,column = <3>;
linux,code = <KEY_A>;
};
key_7 {
keypad,row = <1>;
keypad,column = <4>;
linux,code = <KEY_B>;
};
key_8 {
keypad,row = <1>;
keypad,column = <5>;
linux,code = <KEY_C>;
};
key_9 {
keypad,row = <1>;
keypad,column = <6>;
linux,code = <KEY_D>;
};
key_10 {
keypad,row = <1>;
keypad,column = <7>;
linux,code = <KEY_E>;
};
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&rtc {
status = "okay";
};
&sdhci0 {
bus-width = <4>;
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci1 {
bus-width = <4>;
pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci2 {
bus-width = <4>;
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
pinctrl-names = "default";
status = "okay";
};
&sdhci3 {
bus-width = <4>;
pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>;
pinctrl-names = "default";
status = "okay";
};
&hsotg {
dr_mode = "peripheral";
status = "okay";
};
&usbphy {
status = "okay";
};
&fimd {
pinctrl-0 = <&lcd_clk &lcd_data24>;
pinctrl-names = "default";
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing {
/* 800x480@60Hz */
clock-frequency = <24373920>;
hactive = <800>;
vactive = <480>;
hfront-porch = <8>;
hback-porch = <13>;
hsync-len = <3>;
vback-porch = <7>;
vfront-porch = <5>;
vsync-len = <1>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
&pwm {
samsung,pwm-outputs = <3>;
};
&i2c0 {
status = "okay";
audio-codec@1b {
compatible = "wlf,wm8580";
reg = <0x1b>;
};
eeprom@50 {
compatible = "atmel,24c08";
reg = <0x50>;
};
};
&i2s0 {
status = "okay";
};
第二个，dtsi
// SPDX-License-Identifier: GPL-2.0
/*
* Samsung's S5PV210 SoC device tree source
*
* Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
*
* Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
* Tomasz Figa <t.figa@samsung.com>
*
* Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210
* based board files can include this file and provide values for board specfic
* bindings.
*
* Note: This file does not include device nodes for all the controllers in
* S5PV210 SoC. As device tree coverage for S5PV210 increases, additional
* nodes can be added to this file.
*/
#include <dt-bindings/clock/s5pv210.h>
#include <dt-bindings/clock/s5pv210-audss.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
aliases {
csis0 = &csis0;
fimc0 = &fimc0;
fimc1 = &fimc1;
fimc2 = &fimc2;
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2s0 = &i2s0;
i2s1 = &i2s1;
i2s2 = &i2s2;
pinctrl0 = &pinctrl0;
spi0 = &spi0;
spi1 = &spi1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
external-clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
xxti: oscillator@0 {
compatible = "fixed-clock";
reg = <0>;
clock-frequency = <0>;
clock-output-names = "xxti";
#clock-cells = <0>;
};
xusbxti: oscillator@1 {
compatible = "fixed-clock";
reg = <1>;
clock-frequency = <0>;
clock-output-names = "xusbxti";
#clock-cells = <0>;
};
};
onenand: onenand@b0000000 {
compatible = "samsung,s5pv210-onenand";
reg = <0xb0600000 0x2000>,
<0xb0000000 0x20000>,
<0xb0040000 0x20000>;
interrupt-parent = <&vic1>;
interrupts = <31>;
clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>;
clock-names = "bus", "onenand";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
};
chipid@e0000000 {
compatible = "samsung,s5pv210-chipid";
reg = <0xe0000000 0x1000>;
};
clocks: clock-controller@e0100000 {
compatible = "samsung,s5pv210-clock";
reg = <0xe0100000 0x10000>;
clock-names = "xxti", "xusbxti";
clocks = <&xxti>, <&xusbxti>;
#clock-cells = <1>;
};
pmu_syscon: syscon@e0108000 {
compatible = "samsung-s5pv210-pmu", "syscon";
reg = <0xe0108000 0x8000>;
};
pinctrl0: pinctrl@e0200000 {
compatible = "samsung,s5pv210-pinctrl";
reg = <0xe0200000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <30>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupts = <16>;
interrupt-parent = <&vic0>;
};
};
pdma0: dma@e0900000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xe0900000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <19>;
clocks = <&clocks CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: dma@e0a00000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xe0a00000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <20>;
clocks = <&clocks CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
spi0: spi@e1300000 {
compatible = "samsung,s5pv210-spi";
reg = <0xe1300000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <15>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spi1: spi@e1400000 {
compatible = "samsung,s5pv210-spi";
reg = <0xe1400000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <16>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>;
clock-names = "spi", "spi_busclk0";
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
keypad: keypad@e1600000 {
compatible = "samsung,s5pv210-keypad";
reg = <0xe1600000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <25>;
clocks = <&clocks CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
};
i2c0: i2c@e1800000 {
compatible = "samsung,s3c2440-i2c";
reg = <0xe1800000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <14>;
clocks = <&clocks CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@e1a00000 {
compatible = "samsung,s3c2440-i2c";
reg = <0xe1a00000 0x1000>;
interrupt-parent = <&vic1>;
interrupts = <19>;
clocks = <&clocks CLK_I2C2>;
clock-names = "i2c";
pinctrl-0 = <&i2c2_bus>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
clk_audss: clock-controller@eee10000 {
compatible = "samsung,s5pv210-audss-clock";
reg = <0xeee10000 0x1000>;
clock-names = "hclk", "xxti",
"fout_epll",
"sclk_audio0";
clocks = <&clocks DOUT_HCLKP>, <&xxti>,
<&clocks FOUT_EPLL>,
<&clocks SCLK_AUDIO0>;
#clock-cells = <1>;
};
i2s0: i2s@eee30000 {
compatible = "samsung,s5pv210-i2s";
reg = <0xeee30000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <16>;
dma-names = "rx", "tx", "tx-sec";
dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>;
clock-names = "iis",
"i2s_opclk0",
"i2s_opclk1";
clocks = <&clk_audss CLK_I2S>,
<&clk_audss CLK_I2S>,
<&clk_audss CLK_DOUT_AUD_BUS>;
samsung,idma-addr = <0xc0010000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s1: i2s@e2100000 {
compatible = "samsung,s3c6410-i2s";
reg = <0xe2100000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <17>;
dma-names = "rx", "tx";
dmas = <&pdma1 12>, <&pdma1 13>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
#sound-dai-cells = <0>;
status = "disabled";
};
i2s2: i2s@e2a00000 {
compatible = "samsung,s3c6410-i2s";
reg = <0xe2a00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <18>;
dma-names = "rx", "tx";
dmas = <&pdma1 14>, <&pdma1 15>;
clock-names = "iis", "i2s_opclk0";
clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
#sound-dai-cells = <0>;
status = "disabled";
};
pwm: pwm@e2500000 {
compatible = "samsung,s5pc100-pwm";
reg = <0xe2500000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <21>, <22>, <23>, <24>, <25>;
clock-names = "timers";
clocks = <&clocks CLK_PWM>;
#pwm-cells = <3>;
};
watchdog: watchdog@e2700000 {
compatible = "samsung,s3c6410-wdt";
reg = <0xe2700000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <26>;
clock-names = "watchdog";
clocks = <&clocks CLK_WDT>;
};
rtc: rtc@e2800000 {
compatible = "samsung,s3c6410-rtc";
reg = <0xe2800000 0x100>;
interrupt-parent = <&vic0>;
interrupts = <28>, <29>;
clocks = <&clocks CLK_RTC>;
clock-names = "rtc";
status = "disabled";
};
uart0: serial@e2900000 {
compatible = "samsung,s5pv210-uart";
reg = <0xe2900000 0x400>;
interrupt-parent = <&vic1>;
interrupts = <10>;
clock-names = "uart", "clk_uart_baud0",
"clk_uart_baud1";
clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>,
<&clocks SCLK_UART0>;
status = "disabled";
};
uart1: serial@e2900400 {
compatible = "samsung,s5pv210-uart";
reg = <0xe2900400 0x400>;
interrupt-parent = <&vic1>;
interrupts = <11>;
clock-names = "uart", "clk_uart_baud0",
"clk_uart_baud1";
clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>,
<&clocks SCLK_UART1>;
status = "disabled";
};
uart2: serial@e2900800 {
compatible = "samsung,s5pv210-uart";
reg = <0xe2900800 0x400>;
interrupt-parent = <&vic1>;
interrupts = <12>;
clock-names = "uart", "clk_uart_baud0",
"clk_uart_baud1";
clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>,
<&clocks SCLK_UART2>;
status = "disabled";
};
uart3: serial@e2900c00 {
compatible = "samsung,s5pv210-uart";
reg = <0xe2900c00 0x400>;
interrupt-parent = <&vic1>;
interrupts = <13>;
clock-names = "uart", "clk_uart_baud0",
"clk_uart_baud1";
clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>,
<&clocks SCLK_UART3>;
status = "disabled";
};
sromc: memory-controller@e8000000 { //2022-0103 dazhi add
compatible = "samsung,exynos4210-srom";
reg = <0xe8000000 0x1c>;
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0x80000000 0x8000000
1 0 0x88000000 0x8000000
2 0 0xb0e00000 0xb0e20130
3 0 0x98000000 0x8000000
4 0 0xa0000000 0x8000000
5 0 0xa8000000 0x8000000>;
clocks = <&clocks CLK_SROMC>;
clock-names = "sromc";
status = "disabled";
};
nandc: nand-controller@b0e00000 {
compatible = "samsung,s5pv210-nand";
reg = <0xb0e00000 0x00020130>;
status = "disabled";
clocks = <&clocks CLK_NFCON>;
clock-names = "nand";
#address-cells = <1>;
#size-cells = <1>;
};
sdhci0: sdhci@eb000000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb000000 0x100000>;
interrupt-parent = <&vic1>;
interrupts = <26>;
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>,
<&clocks SCLK_MMC0>;
status = "disabled";
};
sdhci1: sdhci@eb100000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb100000 0x100000>;
interrupt-parent = <&vic1>;
interrupts = <27>;
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>,
<&clocks SCLK_MMC1>;
status = "disabled";
};
sdhci2: sdhci@eb200000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb200000 0x100000>;
interrupt-parent = <&vic1>;
interrupts = <28>;
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2";
clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>,
<&clocks SCLK_MMC2>;
status = "disabled";
};
sdhci3: sdhci@eb300000 {
compatible = "samsung,s3c6410-sdhci";
reg = <0xeb300000 0x100000>;
interrupt-parent = <&vic3>;
interrupts = <2>;
clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3";
clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>,
<&clocks SCLK_MMC3>;
status = "disabled";
};
hsotg: hsotg@ec000000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0xec000000 0x20000>;
interrupt-parent = <&vic1>;
interrupts = <24>;
clocks = <&clocks CLK_USB_OTG>;
clock-names = "otg";
phy-names = "usb2-phy";
phys = <&usbphy 0>;
status = "disabled";
};
usbphy: usbphy@ec100000 {
compatible = "samsung,s5pv210-usb2-phy";
reg = <0xec100000 0x100>;
samsung,pmureg-phandle = <&pmu_syscon>;
clocks = <&clocks CLK_USB_OTG>, <&xusbxti>;
clock-names = "phy", "ref";
#phy-cells = <1>;
status = "disabled";
};
ehci: ehci@ec200000 {
compatible = "samsung,exynos4210-ehci";
reg = <0xec200000 0x100>;
interrupts = <23>;
interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
port@0 {
reg = <0>;
phys = <&usbphy 1>;
};
};
ohci: ohci@ec300000 {
compatible = "samsung,exynos4210-ohci";
reg = <0xec300000 0x100>;
interrupts = <23>;
interrupt-parent = <&vic1>;
clocks = <&clocks CLK_USB_HOST>;
clock-names = "usbhost";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
port@0 {
reg = <0>;
phys = <&usbphy 1>;
};
};
mfc: codec@f1700000 {
compatible = "samsung,mfc-v5";
reg = <0xf1700000 0x10000>;
interrupt-parent = <&vic2>;
interrupts = <14>;
clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>;
clock-names = "sclk_mfc", "mfc";
};
vic0: interrupt-controller@f2000000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0xf2000000 0x1000>;
#interrupt-cells = <1>;
};
vic1: interrupt-controller@f2100000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0xf2100000 0x1000>;
#interrupt-cells = <1>;
};
vic2: interrupt-controller@f2200000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0xf2200000 0x1000>;
#interrupt-cells = <1>;
};
vic3: interrupt-controller@f2300000 {
compatible = "arm,pl192-vic";
interrupt-controller;
reg = <0xf2300000 0x1000>;
#interrupt-cells = <1>;
};
fimd: fimd@f8000000 {
compatible = "samsung,exynos4210-fimd";
interrupt-parent = <&vic2>;
reg = <0xf8000000 0x20000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
interrupts = <0>, <1>, <2>;
clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>;
clock-names = "sclk_fimd", "fimd";
status = "disabled";
};
g2d: g2d@fa000000 {
compatible = "samsung,s5pv210-g2d";
reg = <0xfa000000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <9>;
clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
};
mdma1: mdma@fa200000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0xfa200000 0x1000>;
interrupt-parent = <&vic0>;
interrupts = <18>;
clocks = <&clocks CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
i2c1: i2c@fab00000 {
compatible = "samsung,s3c2440-i2c";
reg = <0xfab00000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <13>;
clocks = <&clocks CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
camera: camera {
compatible = "samsung,fimc", "simple-bus";
pinctrl-names = "default";
pinctrl-0 = <>;
clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>;
clock-names = "sclk_cam0", "sclk_cam1";
#address-cells = <1>;
#size-cells = <1>;
ranges;
clock_cam: clock-controller {
#clock-cells = <1>;
};
csis0: csis@fa600000 {
compatible = "samsung,s5pv210-csis";
reg = <0xfa600000 0x4000>;
interrupt-parent = <&vic2>;
interrupts = <29>;
clocks = <&clocks CLK_CSIS>,
<&clocks SCLK_CSIS>;
clock-names = "clk_csis",
"sclk_csis";
bus-width = <4>;
status = "disabled";
#address-cells = <1>;
#size-cells = <0>;
};
fimc0: fimc@fb200000 {
compatible = "samsung,s5pv210-fimc";
reg = <0xfb200000 0x1000>;
interrupts = <5>;
interrupt-parent = <&vic2>;
clocks = <&clocks CLK_FIMC0>,
<&clocks SCLK_FIMC0>;
clock-names = "fimc",
"sclk_fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
fimc1: fimc@fb300000 {
compatible = "samsung,s5pv210-fimc";
reg = <0xfb300000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <6>;
clocks = <&clocks CLK_FIMC1>,
<&clocks SCLK_FIMC1>;
clock-names = "fimc",
"sclk_fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,cam-if;
};
fimc2: fimc@fb400000 {
compatible = "samsung,s5pv210-fimc";
reg = <0xfb400000 0x1000>;
interrupt-parent = <&vic2>;
interrupts = <7>;
clocks = <&clocks CLK_FIMC2>,
<&clocks SCLK_FIMC2>;
clock-names = "fimc",
"sclk_fimc";
samsung,pix-limits = <4224 8192 1920 4224>;
samsung,mainscaler-ext;
samsung,lcd-wb;
};
};
};
};
#include "s5pv210-pinctrl.dtsi"
扫一扫
2826
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
