windows下制作Ubuntu的U盘启动工具

Ubuntu官网有详细的步骤,参考来自:https://tutorials.ubuntu.com/tutorial/tutorial-create-a-usb-stick-on-windows?_ga=2.113056519.267075236.1562746706-1347571438.1562746706#1

1. Requirements

You will need:

       (1)A 4GB or larger USB stick/flash drive
       (2)Microsoft Windows XP or later
       (3)Rufus, a free and open source USB stick writing tool
       (4)An Ubuntu ISO file. See Get Ubuntu for download links
在这里插入图片描述

2. USB selection

Perform the following to configure your USB device in Rufus:

       (1)Launch Rufus
       (2)Insert your USB stick
       (3)Rufus will update to set the device within the Device field
       (4)If the Device selected is incorrect (perhaps you have multiple USB storage devices), select the correct one from the device field’s drop-down menu

                                                                 在这里插入图片描述

3. Boot selection and Partition scheme

       Now choose the Boot selection. Choices will be Non bootable and FreeDOS. Since you are creating a bootable Ubuntu device select FreeDOS.

       The default selections for Partition scheme (MBR) and Target system (BIOS (or UEFI-CSM)) are appropriate (and are the only options available).
                                                                 在这里插入图片描述

4. Select the Ubuntu ISO file

       To select the Ubuntu ISO file you downloaded previously, click the SELECT to the right of “Boot selection”. If this is the only ISO file present in the Downloads folder you will only see one file listed.

       Select the appropriate ISO file and click on Open.
在这里插入图片描述

5. Write the ISO

       The Volume label will be updated to reflect the ISO selected.

       Leave all other parameters with their default values and click START to initiate the write process.
                                                                 在这里插入图片描述

6.Additional downloads

       You may be alerted that Rufus requires additional files to complete writing the ISO. If this dialog box appears, select Yes to continue.
                                                                    在这里插入图片描述

7. Write warnings

       You will then be alerted that Rufus has detected that the Ubuntu ISO is an ISOHybrid image. This means the same image file can be used as the source for both a DVD and a USB stick without requiring conversion.

       Keep Write in ISO Image mode selected and click on OK to continue.
                                                     在这里插入图片描述
       Rufus will also warn you that all data on your selected USB device is about to be destroyed. This is a good moment to double check you’ve selected the correct device before clicking OK when you’re confident you have.
                                                                 在这里插入图片描述

8. Writing the ISO

       The ISO will now be written to your USB stick, and the progress bar in Rufus will give you some indication of where you are in the process. With a reasonably modern machine, this should take around 10 minutes. Total elapsed time is shown in the lower right corner of the Rufus window.
                                                                 在这里插入图片描述

9. Installation complete

       When Rufus has finished writing the USB device, the Status bar will be green filled and the word READY will appear in the center. Select CLOSE to complete the write process.
                                                                 在这里插入图片描述

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值