Ubuntu 10.10 vi 问题解决方法
时间:2011-02-14 10:45 来源:Linux社区 收藏 复制分享 共有评论(0)条
最近安装了Ubuntu 10.10 ,使用vi命令时,不能正常编辑文件,使用方向键时老是出现很多字母
在网上找了个方法 问题已经解决 分享一下:
只要依次执行以下两个命令即可完美解决Ubuntu下vi编辑器方向键变字母的问题。
一.执行命令 sudo apt-get remove vim-common
二.执行命令 sudo apt-get install vim
再试试Vi编辑器,是不是恢复正常了。s
RabbitVCS:Linux下的TortoiseSVN,ubuntu下安装方法
2011-05-25 00:57 by icejoywoo, 362 visits, 收藏, 编辑
官方网站:http://rabbitvcs.org/
可以进行svn,git的版本控制,和nautilus的整合比较好,和TortoiseSVN使用习惯相似,非常不错的一款软件
下面的安装方法,都是官方网站的文档,简单的翻译了一下,我个人觉得挺好用的,拿来和大家分享。
Installing from our distributed tarball is relatively straightforward on Ubuntu.
在ubuntu上使用tarball的方式安装也是相对简单的。
First, make sure you install all dependencies:
首先,就是确保你安装了所有的依赖
sudo apt-get install python-nautilus python-configobj python-gtk2 python-glade2 python-svn python-dbus subversion meld
Then download the tarball and from the top folder type:
下载tarball(官方下载地址:http://code.google.com/p/rabbitvcs/downloads/list,备用下载地址:rabbitvcs-0.14.2.1.zip),进入解压的目录
tar xvf rabbitvcs-0.14.2.1.tar.gz
或
unzip rabbitvcs-0.14.2.1.zip
cd rabbitvcs-0.14.2.1
sudo python setup.py install
Once that is done working, look in the clients folder and read the README file for each client/plugin to learn how they are installed.
一旦完成安装工作,就进入clients文件夹,查看README文件,进行客户端的安装。
RabbitVCS Nautilus Extension (与nautilus的整合)
This extension is meant to be used with the Nautilus File Manager,
这个扩展是整合在natulius文件管理器中的
Requirements(依赖):
* nautilus (>= v2.22.0)
* nautilus-python (>= 0.5.1)
* python-dbus (> 0.80)
* (all other RabbitVCS requirements)
To install:
安装方式:
To install for all users, copy RabbitVCS.py to: 为所有用户安装
/usr/lib/nautilus/extensions-2.0/python
To install for a single user, copy RabbitVCS.py to: 针对单个用户安装
~/.nautilus/python-extensions
In both cases, you may need to create the python/python-extensions folder.
两种方式,你都需要创建目录python或python-extensions。
单个用户安装方式,完整的参考命令如下:
cd clients/nautilus
mkdir ~/.nautius/python-extensions
cp RabbitVCS.py ~/.nautilus/python-extensions
Restart nautilus with the following commands:
使用下列命令重启nautilus
nautilus -q
pgrep -f service.py | xargs kill
nohup nautilus > /dev/null &
时间:2011-02-14 10:45 来源:Linux社区 收藏 复制分享 共有评论(0)条
最近安装了Ubuntu 10.10 ,使用vi命令时,不能正常编辑文件,使用方向键时老是出现很多字母
在网上找了个方法 问题已经解决 分享一下:
只要依次执行以下两个命令即可完美解决Ubuntu下vi编辑器方向键变字母的问题。
一.执行命令 sudo apt-get remove vim-common
二.执行命令 sudo apt-get install vim
再试试Vi编辑器,是不是恢复正常了。s
RabbitVCS:Linux下的TortoiseSVN,ubuntu下安装方法
2011-05-25 00:57 by icejoywoo, 362 visits, 收藏, 编辑
官方网站:http://rabbitvcs.org/
可以进行svn,git的版本控制,和nautilus的整合比较好,和TortoiseSVN使用习惯相似,非常不错的一款软件
下面的安装方法,都是官方网站的文档,简单的翻译了一下,我个人觉得挺好用的,拿来和大家分享。
Installing from our distributed tarball is relatively straightforward on Ubuntu.
在ubuntu上使用tarball的方式安装也是相对简单的。
First, make sure you install all dependencies:
首先,就是确保你安装了所有的依赖
sudo apt-get install python-nautilus python-configobj python-gtk2 python-glade2 python-svn python-dbus subversion meld
Then download the tarball and from the top folder type:
下载tarball(官方下载地址:http://code.google.com/p/rabbitvcs/downloads/list,备用下载地址:rabbitvcs-0.14.2.1.zip),进入解压的目录
tar xvf rabbitvcs-0.14.2.1.tar.gz
或
unzip rabbitvcs-0.14.2.1.zip
cd rabbitvcs-0.14.2.1
sudo python setup.py install
Once that is done working, look in the clients folder and read the README file for each client/plugin to learn how they are installed.
一旦完成安装工作,就进入clients文件夹,查看README文件,进行客户端的安装。
RabbitVCS Nautilus Extension (与nautilus的整合)
This extension is meant to be used with the Nautilus File Manager,
这个扩展是整合在natulius文件管理器中的
Requirements(依赖):
* nautilus (>= v2.22.0)
* nautilus-python (>= 0.5.1)
* python-dbus (> 0.80)
* (all other RabbitVCS requirements)
To install:
安装方式:
To install for all users, copy RabbitVCS.py to: 为所有用户安装
/usr/lib/nautilus/extensions-2.0/python
To install for a single user, copy RabbitVCS.py to: 针对单个用户安装
~/.nautilus/python-extensions
In both cases, you may need to create the python/python-extensions folder.
两种方式,你都需要创建目录python或python-extensions。
单个用户安装方式,完整的参考命令如下:
cd clients/nautilus
mkdir ~/.nautius/python-extensions
cp RabbitVCS.py ~/.nautilus/python-extensions
Restart nautilus with the following commands:
使用下列命令重启nautilus
nautilus -q
pgrep -f service.py | xargs kill
nohup nautilus > /dev/null &