一.实验拓扑
二.实验要求
1、AS1中存在两个环回,一个地址为192.168.1.0/24,该地址不能在任何协议中宣告;
AS3中存在两个环回,一个地址为192.168.2.0/24,该地址不能在任何协议中宣告,最终要求这两个环回可以ping通;
2、整个AS2的IP地址为172.16.0.0/16,请合理划分;并且其内部配置OSPF协议
3、R1-R8的建邻环回用x.x.x.x/32表示;R2-R7上除了建邻环回,每个设备再划分一个业务网段;
4、AS间的骨干链路IP地址随意定制;
5、使用BGP协议让整个网络所有设备的环回可以互相访问;
三.实验步骤
1.配置IP地址和环回地址
R1的
R2的
R3的
R4的
以此类推
2.配置ospf
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]a 0
[r2-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]a 0
[r3-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]a 0
[r4-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]a 0
[r5-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]a 0
[r6-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
[r7]ospf 1 router-id 7.7.7.7
[r7-ospf-1]a 0
[r7-ospf-1-area-0.0.0.0]network 172.16.0.0 0.0.255.255
3.配置BGP
[r2]bgp 64512
[r2-bgp]route-select
[r2-bgp]router-id 2.2.2.2
[r2-bgp]confederation id 2
[r2-bgp]confederation peer-as 64513
[r2-bgp]peer 12.0.0.1 as 1
[r2-bgp]peer 172.16.3.1 as 64512
[r2-bgp]peer 172.16.3.1 connect-interface LoopBack 0
[r2-bgp]peer 172.16.5.1 as 64513
[r2-bgp]peer 172.16.5.1 connect-interface LoopBack 0
[r2-bgp]peer 172.16.5.1 ebgp-max-hop 2
[r2-bgp]peer 172.16.3.1 next-hop-local
[r2-bgp]peer 172.16.5.1 next-hop-local
[r8]bgp 3
[r8-bgp]router-id 8.8.8.8
[r8-bgp]peer 78.0.0.1 as 2
4.发布路由
5.配置路由反射器
6.建立GPE隧道
7.测试
[R1]ping -a 192.168.1.1 192.168.2.1
PING 192.168.2.1: 56 data bytes, press CTRL_C to break
Reply from 192.168.2.1: bytes=56 Sequence=1 ttl=255 time=110 ms
Reply from 192.168.2.1: bytes=56 Sequence=2 ttl=255 time=50 ms
Reply from 192.168.2.1: bytes=56 Sequence=3 ttl=255 time=40 ms
Reply from 192.168.2.1: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 192.168.2.1: bytes=56 Sequence=5 ttl=255 time=30 ms
--- 192.168.2.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 30/54/110 ms
[R1]